Robertshaw 10-531 User Manual

10-531 TAP-1 THERMOSTAT ADAPTOR
PLATE INSTALLATION INSTRUCTIONS

Not all combinations of installation are detailed. The basic idea of the plate is to
mount it to the wall or 2x4 box and then mount the thermostat to the plate.

NOTE:

When mounting the thermostat to the plate using the self tapping screws, do not drill
the hole larger than 1/8 inch to ensure the threads have something to grip.

ON DRYWALL:
Use plugs and screws
provided with
thermostat and use
holes 'A' for
preferred orientation.

ON 2x4 BOX
(vertical):
Use machine screws

Clock

Set Temp

Program

Hold

Outdoor

Mode

Fr

Fan

PM

Resume

provided and drill out
holes 'A'. Put screws
through wall bracket
and wall plate.

Models: All Robertshaw Products

C

5.25"

D

B

7"

A

B

C

A

C

D

B

FRONT VIEW (Not Actual Size)

REAR VIEW (Not Actual Size)

111-117