Roberts Gemini RD-31, Gemini 31 User Manual

RD-31
Please read this manual before use
ROBERTS
Sound for Generations
FM RDS/DAB digital radio
Controls ...............................................................................2
Battery operation .................................................................3
Mains operation ...................................................................3
Operating your radio - DAB .................................................4
Selecting a station - DAB ....................................................5
Secondary services - DAB ..................................................6
Display modes - DAB ...................................................... 7-8
Finding new stations - DAB ................................................9
Signal strength display - DAB ..............................................9
Using your radio's PausePlus feature - DAB .....................11
Station order setup - DAB ........................................... 13-14
Contents
Specifications ....................................................................23
1
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
2
Controls
1. Telescopic aerial (on rear)
2. On/Off button
3. Mains LED indicator
4. Treble control
5. Liquid crystal display (LCD)
6. PausePlus button
(Top)
1
13. Tuning Up button
14. Tuning Down button
15. Tuning control
16. Station presets
17. Bass control
18. Volume control
7. Auto Tune button
8. Headphone socket
9. FM/DAB button
10. Line out socket
11. Info button
12. Select / Real Time button
2
3 4 6 9 11 12 13
18
17 16
5 7 14
15
8 10
3
Battery operation
1. Remove the Battery cover on the rear of the unit by pushing the battery door in and downwards.
2. Insert six LR20 (D size) batteries into the spaces in the compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery cover.
3. Reduced power, distortion and a ‘stuttering’ sound are all signs that the batteries may need replacing.
4. If the radio is not to be used for any extended period of time it is recommended that the batteries are removed from the radio.
We would recommend for economy that the RD-31 is used on the
mains whenever possible with battery operation for occasional or stand-by use only.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fire or the like. After use, disposable batteries should if possible be taken to a suitable recycling centre. On no account should batteries be disposed of by incineration.
Mains operation
1. Place your radio on a flat surface.
2. Plug the mains lead into the
Socket located on the rear of your radio
ensuring that the plug is pushed fully into the socket.
3. Plug the other end of the mains lead into a wall socket and switch on the wall socket.
IMPORTANT: The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains plug should be removed from the mains socket outlet completely.
4. When the mains LED is on, it indicates that the radio is connected to and powered from the mains supply.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
Operating your radio - DAB
1. Fully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will show "Welcome to DAB" for a few seconds.
3. If this is the first time the radio is used a quick scan of the UK band III DAB channels will be carried out.
4. During Autotune as each group of stations is detected the bottom line of the display will show a bargraph indicating progress of the Autotune.
5. When the Autotune is complete the first station (in numeric-alpha order
0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune you radio will display "No stations available".
7. If no signals are found it may be necessary to relocate your radio to a position giving better reception.
2
5
Selecting a station - DAB
1. The top line of the display shows the name of the station currently selected.
2. Rotate the Tuning control or press the
Up or Down buttons to scroll
through the list of available stations.
3. Press and release the Select button to select the station. The display may show "Now Tuning" while your radio finds the new station.
4. Adjust the Volume
and Tone controls to the required settings.
Note: If after selecting a station the display shows "Station not available"
it may be necessary to relocate your radio to a position giving better reception.
4
3
2
2
2
4
4
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6
Secondary services - DAB
1. Certain radio stations have one or more secondary services associated with them. If a station has a secondary service associated with it the display will show ">>" next to the station name on the station list. The secondary service will then appear immediately after the primary service as you rotate the Tuning control.
2. To tune to the secondary service, press and release the Select button
. Most secondary services do not broadcast continually and if the selected service is not available, the radio will retune to the associated primary service.
1
2
Display modes - DAB
Your radio has nine display modes:-
1. Press the
Info button to cycle through the various modes.
a. Scrolling text Displays scrolling text messages such as
artist/track name, phone in number etc.
b. Program Type Displays the type of station being listened
to e.g. Pop, Classic, News etc.
c. Multiplex Name Displays the name of DAB multiplex to
which the current station belongs.
d. Signal strength Displays signal strength for the station
being listened to.
e. Time and date Displays current the time and date.
a
b
c
e
1
7
d
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
8
g
f
h
f. Frequency Displays the frequency of the DAB
multiplex for the station listened to.
g. Bit rate & audio type Displays the digital bit rate & audio type
for the station being listened to.
h. Signal Error Displays the signal error for the station
being listend to.
i. Maximum delay Displays the maximum PausePlus delay
time for the station being listened to.
i
Loading...
+ 19 hidden pages