Page 1
CR9951
3 Band Single Alarm
Clock Radio
Sound for Generations
Please read this manual before use
Page 2
9. AL. Set/off button
10. Time button
11 . Minute button
12. Hour button
5. Waveband selector
6. Tuning control
7. Snooze button
8. Sleep button
4
5
6
12 11 10 9 8 7
(Top)
3
Page 3
2
(Front)
13. PM indicator
14. LED dial pointer
15. Battery compartment (underside)
16
15
14
13
17
16. Rating plate (underside)
17. Alarm indicator
Page 4
Page 5
4
Page 6
Page 7
6
Page 8
Page 9
8
Page 10
The wire coloured BLUE must be
connected to the terminal marked
N or coloured BLACK.
The wire coloured BROWN must
be connected to the terminal
marked L or coloured RED.
Fuse
This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug
(BS1363). If another type of plug is used a 5A fuse should be fitted in
the plug, adaptor or distribution board.
IF IN DOUBT - CONSUL T A QUALIFIED ELECTRICIAN.
Back-up Battery (not necessary for the unit to function)
Slide the battery cover catch in the direction of the arrow. Remove the
battery cover. Fit a 9 volt IEC size 6LR61(6F22,PP3) or equivalent
battery into the compartment. Replace the battery cover.
The time and alarm settings will be retained during a temporary failure
of the AC mains supply. The LED display will not be operational. The
display will be extinguished to conserve battery life.
(Underside)
Page 11
10
The Company reserves the right to amend the specification without notice.
Circuit Features
Loudspeaker 75mm diameter 8 ohms
Output Power 0.3W RMS
Aerial System FM Wire Aerial
MW Built-in Ferrite aerial
LW Built-in Ferrite aerial
Page 12
Guarantee
These statements do not affect the statutory rights of a consumer.
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Product with removed or defaced serial numbers.
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)
Loading...