Page 1
CR9932
3 Band Single Alarm
Night Light Clock Radio
Please read this manual before use
Page 2
(Top)
3
9. Alarm/Off button
10. Time button
1 1. Minute button
12. Hour button
5. Waveband selector
6. Tuning control
7. Snooze/night light button
8. Sleep button
4
5
6
12 11 10 9 8 7
Page 3
2
(Front)
15
14
Page 4
Page 5
4
Page 6
Page 7
6
Page 8
Page 9
8
Page 10
Fuse
This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug
(BS1363). If another type of plug is used a 5A fuse should be fitted in
the plug, adaptor or distribution board.
IF IN DOUBT - CONSUL T A QUALIFIED ELECTRICIAN.
Back-up Battery (not necessary for the unit to function)
Slide the battery cover catch in the direction of the arrow. Remove the
battery cover. Fit a 9 volt IEC size 6LR61(6F22,PP3) or equivalent
battery into the compartment. Replace the battery cover.
The time and alarm settings will be retained during a temporary failure
of the AC mains supply. The LED display will not be operational. The
display will be extinguished to conserve battery life.
(Underside)
Page 11
10
Circuit Features
Loudspeaker 75mm diameter 8 ohms
Output Power 0.3W RMS
Aerial System FM Wire Aerial
MW Built-in Ferrite aerial
LW Built-in Ferrite aerial
Page 12
Guarantee
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Product with removed or defaced serial numbers.
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Loading...