Page 1
CR9922
3 Band Dual Alarm
Clock Radio
Please read this manual before use
Page 2
9. Slow reverse button
10. Snooze button
11. Alarm type indicators
12. Auto dimmer
5. Fast forward button
6. Time set button
7. Alarm set/Off button
8. Sleep button
1234
56789
13. Alarm 1 indicator
14. PM indicator
Page 3
18. Volume control
19. Waveband selector
20. Tuning control
21. Battery compartment (on underside)
2
18 19 20
21
Page 4
ON
Page 5
4
Page 6
1
' position.
2
' position.
Page 7
1
'
2
'
6
Page 8
Page 9
8
Page 10
Fuse
This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug
(BS1363). If another type of plug is used a 5A fuse should be fitted in the
plug, adaptor or distribution board.
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.
Back-up Battery (not necessary for the unit to function)
Slide the battery cover catch in the direction of the arrow. Remove the
battery cover. Fit a 9 volt IEC size 6LR61 (6F22, PP3) or equivalent battery
into the compartment. Replace the battery cover.
The time and alarm settings will be retained during a temporary failure of the
AC mains supply. The LED display will not be operational. The display will
be extinguished to conserve battery life, but the memory will retain details
of the time and alarm time settings.
If your clock radio is not to be used for a prolonged period of time, remove
the battery to avoid damage by battery leakage.
(Underside)
Page 11
only
Circuit Features
Loudspeaker 8 ohms
Output power 350mW
Aerial System FM Wire Aerial
MW Built-in Ferrite aerial
LW Built-in Ferrite aerial
ROBERTS RADIO LIMITED
PO BOX 130
MEXBOROUGH
SOUTH YORKSHIRE
S64 8YT
10
Page 12
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline:- 020 8758 0338 (Mon-Fri)
Guarantee
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Product with removed or defaced serial numbers.
These statements do not affect the statutory rights of a consumer.
Loading...