
CR9916
2 Band Dual Alarm
CD Clock Radio
Please read this manual before use
Stop
Power FM St Memory Repeat Random
Sleep
Down/
B.skip
Repeat
CD mode
Up/
F.skip
Play/
Pause
Sleep
Snooze
Memory
Power
CD Display Time Set
PM
1
2

Stop
Power FM St Memory Repeat Random
Sleep
Down/
B.skip
Repeat
CD mode
Up/
F.skip
Play/
Pause
Sleep
Snooze
Memory
Power
CD Display Time Set
PM
1
2
11.Memory button
12. Time set button
13. CD display button
14. Sleep button
15. Snooze button
6. CD play/pause button
7. CD mode/sleep indicators
8. Alarm 2 indicator
9. Tuning dial
10. Power button
123 6
16. Alarm 1 indicator
17. PM indicator
18. Power indicator
19. FM stereo indicator
45
7
8
9
10
11
12

24. Tuning control
25. Function switch
26. Volume control
27. Battery compartment (on underside)
2
20
24
Tuning
CD
MW
FM
FMSt.
Vol
21
22
23
25
26
27

Fuse
This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug
(BS1363). If another type of plug is used a 5A fuse should be fitted in the
plug, adaptor or distribution board.
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.
Back-up Battery (not necessary for the unit to function)
Slide the battery cover catch in the direction of the arrow. Open the battery
cover. Fit a 9 volt IEC size 6LR61 (6F22, PP3) or equivalent battery into the
compartment. Observe the correct polarity as shown on battery cover.
The time and alarm settings will be retained during a temporary failure of the
AC mains supply. The LED display will not be operational. The display will
be extinguished to conserve battery life, but the memory will retain details
of the time and alarm time settings.
If your clock radio is not to be used for a prolonged period of time, remove
the battery to avoid damage by battery leakage.
(Underside)
OPEN

only
Circuit Features
Loudspeakers 2 x 8 ohms
Output power 2 x 500mW
Aerial System FM Wire Aerial
MW Built-in Ferrite aerial
ROBERTS RADIO LIMITED
PO BOX 130
MEXBOROUGH
SOUTH YORKSHIRE
S64 8YT
14
CLASS 1
LASER PRODUCT

97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline:- 020 8758 0338 (Mon-Fri)
Issue 1
Guarantee
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.