Robam CXW-200-A861 Operation Manual
A861
CXW-200-
Range Hood
Operation Manual
CONTENTS
1.Important Information.........................1
2.Product Overview...............................1
3.Installation..........................................2
4.Use Instruction..................................5
5.Maintenance and Services...............6
6.Circuit Diagram..................................9
7.General Troubleshooting....................10
Technical Datas
1
Improper operation may cause hazardous effect.
Picture 1
Decorative tube
Switch
Oil cup
CXW-20 0-83 12
Dear Users
Thank for your buying our range hood. Please accept our best regards.
Please read this operation manual carefully before installation and operation.
Important Information
Product Overview
New Package of Range Hood
Please settle those packages carefully in order to protect environment.
Don’t allow children to play plastic film and package, it may cause asphyxia. Please avoid children near package
material.
Dispose Old Range Hood
If the old range hood can’t work, we suggest users to dispose them after confirming without any usage.
There are something useful material inside of old range hood, please assist us to dispose so as to protect environment.
Before use new range hood
This range hood exhaust fume outside.
Please read this manual and all information carefully before installation and operation. Please comply with our
suggestion. If it’s necessary, please read manual for gas hob. And please keep these manual carefully for future reference.
This manual is available for different models. So you may find different description with your own range hood.
If range hood has obvious damage, please don’t electrify and contact operator.
Children and disability are not allowed to use range hood independently in order to avoid accident.
≥230
895×463×856(m m)
15 m/min
3
+1
-2
CXW- 200-A861
≤4W
≥22%
22kg
Size( L x W x H)
Model
Power Supply
Total Pressure Efficiency
Nominal Wind Pressure
Air Flow Rate
a. c 220-240V 50Hz
Pa
Noise
Rated Mai n Motor Inp ut Powe r
Lighting Power
Net Weight
200W
Non-Disassembly and W Free ash
≤57dB
Installation
Preparation
Size & Dimension
325
463
2
386
895
856( )430
Picture 2
CXW-200-8 312
Note:The lenghth is only for reference，in the brackets of the size is high of draw tube .（size：mm）
Ambient environment
Packing List
Packing List
No.
Item Name
Quantity
No.
Item Name
Quantity
1
12
11
6
5
4
3
2
Plastic expansion tube
1 unit
4 pcs
1 piece
Check Valve
1 piece
9
ST 4x18 tapping screw
8 pcs
ST 3x10 tapping screw
4 pcs
13
14
ST 4.8x50 wooden screw
4 pcs
10
Stop block for bracket
1 unit
M6metal expansion tube
1 unit
7
Stainless steel oil cup
Hanging feet
1 unit
8
Φ175 aluminum foil's duct(2m)
Φ175 air duct’s interface
Fixed bar of air duct
Adhesive tape
1 set
Range Hood
Warning
Range hood shall be installed away from positions with too many windows or doors, which will lead
to strong air convection and thus reduce the effect of fume removal.
Tools
Note: This product must be used in the daily life. Don't use it under special situation(for example:
outside ),Meanwhile ,don' t us e th is p ro du ct t o ex ha us t da ng er ou s ex pl osive material or gas . This
product must be placed under safe circumstance before installation. (dry, good ventilation, noncorrosive and innoxious ,etc)
!
Installing range hood requires the following tools:1. impact electric drill(with drill bit); 2.Wrench;
3. Screwdriver;4. Ruler
1.The range hood is prohibited from exhausting fume into hot flue ,which is used for exhausting gas fuel or
other fuel fume.
2 In installing metal expansion tube ensure perfect match of tube diameter with hole diameter to prevent
accidental falling off loosened expansion tube due to excessive hole expansion
3 Use range hood in case of gas or other fuel combustion and ensure ventilation in the room
4 Flue opening smaller than that of the air duct or excessively long air duct will affect the fume removal
. ,
from .
. good .
. .
Non-Disassembly and ree Wash F
Loading...