Robam CXW-200-A806 Operation Manual

A806
Operation Manual
Range Hood
CXW-200-A806
CONTENTS
2.Product Overview...............................1
3.Installation..........................................2
4.Use Instruction..................................6
5.Maintenance and Services...............7
6.Circuit Diagram..................................9
7.General Troubleshooting....................9
A806
Dear users: Thank for your buying our range hood. Please accept our best regards. Please read this operation manual carefully before installation and operation.
Technical Paramater
1
This mark means warning contents, Improper operation may cause accident.
Picture 1
Important Information
Panel
Switch
Oil Cup
Product Overview
New Package of Range Hood Please settle those packages carefully in order to protect environment. Don’t allow children to play plastic film and package, it may cause asphyxia. Please avoid children near package
material.
Dispose Old Range Hood
If the old range hood can’t work, we suggest users to dispose them after confirming without any usage.
There are something useful material inside of old range hood, please assist us to dispose so as to protect environment.
Before use new range hood
This range hood exhaust fume outside.
Please read this manual and all information carefully before installation and operation. Please comply with our
suggestion. If it’s necessary, please read manual for gas hob. And please keep these manual carefully for future reference.
This manual is available for different models. So you may find different description with your own range hood.
If range hood has obvious damage, please don’t electrify and contact operator. Children and disability are not allowed to use range hood independently in order to avoid accident.
220Pa
895×500×535(mm)
17 m/min
3
Rated Main Motor Input Power
58.5dB
22%
23kg
2W 2×
Size( L x W x H)
Max Wind Pressu re
Normal reducing degree of air
Momentary reducing rate of air
73%
310Pa
96%
Rat ed Whole Machine Inpu t Powe r
204W
200W
Fat Sep arati on Degree
92%
Noise
Max Lighting Power
Net Wei ght
Model
Power Supply
Total Pressure Efficienc y
Nominal Wind Pr essure
Air Flow Rate
CXW- 200- A806
220-240V~ 50H z
+1
-2
a.c
Range Hood
Installation
Warning
1.The range hood is prohibited from exhausting fume into hot flue ,which is used for exhausting gas fuel or other fuel fume. 2 In installing metal expansion tube ensure perfect match of tube diameter with hole diameter to prevent accidental falling off loosened expansion tube due to excessive hole expansion 3 Use range hood in case of gas or other fuel combustion and ensure ventilation in the room 4 Flue opening smaller than that of the air duct or excessively long air duct will affect the fume removal
. ,
from . . good . . .
Preparation
Ambient envir onment
Range hood shall be installed away from positions with too many windows or doors, which will lead to strong air convection and thus reduce the effect of fume removal.
Tools
Installing ra nge hood requires the following tools: 1. impact e lectric drill(with drill bit) ;2. Wrench;
3. Screwd river; 4. Ruler
Size & Dimension
367
500
Packing List
2
317
895
535( 430)
Picture 2
CXW-200-8 312
Note: This product must be used in the daily life. Don't use it under special situation(for example:outside ), Meanwhile ,don't use this product to exhaust dangerous explosive material or gas . This product must be placed under safe circumstance before installation. (dry, good ventilation,non-corrosive and innoxious ,etc)
A806
Note: The lengt h is only for reference(mm).
Note:There are 2 oil cups in the carton. The one is stand by oil cup and another is for machine. Please install one oil cup on the mesh cover before operation. If there is check valve interface in the carton, please install air duct according to picture 11-2. If without, please install it according to picture 11-1.
Packing List
No.
Item Name
Quantity
No.
Item Name
Quantity
1
12
11
6
5
4
3
2
Range Hood
Plastic expansion tube
Operation Manual
Check Valve
1 unit
4 pcs
1 piece
1 piece
ST 4x18 tapping screw
10 pcs
ST 3x10tapping screw
4 pcs
Φ175 aluminum foil's duct(2m)
13
14
ST 4.8x50wooden screw
4 pcs
10
Stop block for brachet
1 piece
M6metal expansion tube
1 piece
7
Oil cup
1 piece
15
Hanging feet
1 piece
8
Φ175 air duct’s interface
9
Adhesive tape
Fixed bar of air duct
1 pair
16
Range Hood
Loading...
+ 8 hidden pages