Roadmaster VRTP4N1 User Manual

GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
Dear Customer, CONGRATULATIONS. The VRTP4N1 Power Supply & FM Transmitter, when used as described, will give you years of dependable service in your car, truck, RV or mini-van. We have taken numerous measures in quality control to ensure that your product ar­rives in top condition, and will perform to your satisfaction. In the rare event that your VRTP4N1 Power Supply & FM Transmitter contains a damaged or missing item, does
not perform as specied, requires warranty service or you have an installation problem,
DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA (800-445-1797) and ask to speak with a
member of our technical service team, or submit your questions by e-mail our web site vr-3.com, and a member of our technical service team will respond by e-mail to your questions. Our in-house technical service team will expedite delivery of your part, advise you on installation, or help troubleshoot a problem with you. If your product needs war­ranty service, our technical service team representative will help you obtain the fastest remedy possible under the warranty.
with FM Transmitter
4 IN 1 110 Watt Power Inverter
Operation
Remove the VRTP4N1 from the vehicle’s 12 Volt power outlet when not in use. When the vehicle is not running, power ports & cigarette lighter sockets of some vehicles are still powered by the vehicle’s battery when the vehicle is OFF.
120VOLT AC POWER OUTLET
The 120 Volt AC Outlet can power or recharge Laptops, DVD Players, Camcord­ers, Video Games, & TVs up to 13”
1. With the vehicle engine’s running, insert the 12 Volt adaptor end into the vehicle’s cigarette lighter plug or 12 Volt Power Port.
2. Plug your 120 Volt AC powered device into the 120 Volt AC Power Outlet. Do not use a device that uses more than 110 Watts, otherwise the fuse will blow.
3. Operate your device normally, as described by the manufacturer. The inverter outputs 100 watts for 20 minutes maximum.
Frequently Asked Questions
HOW MANY DEVICES CAN I USE WITH THE VRTP4N1?
You should only use 2 outlets at a time. and only use 1 decive in each outlet.
CAN I USE ANOTHER VRPT4N1 WITH THE VRTP4N1?
No, using another VRTP4N1 or any other inverter, or multiple outlet adaptor.
CAN I PLAY AUDIO FILES FROM A FLASH DRIVE?
No the VRBT4N1 is not an M3 player. The VRTP4N1 transmits audio via the stereo input jack.
WHAT SHOULD I DO IF I HEAR INTERFERENCE FROM A LOCAL FM STATION?
Tune in one of the Pre-Set FM frequencies that does not have a local station, and set the VRTP4N1 for that channel.
WHAT IS THE MAXIMUM RANGE OF THE VRTP4N1 TRANSMITTER?
Under optimum conditions, 3 meters or 10 feet.
CAN I PLUG A MICROPHONE INTO THE AUDIO INPUT CONNECTOR?
No. The output signal from a microphone is too small to modulate the FM transmitter.
This set complies as of date of
Features & Functions
manufacture with FCC rules and regulations Part 15, Subpart C
LED Display
Channel Down Button
120 Volt AC
Power Outlet
USB Port
Channel Up Button
12 Volt DC
Power Outlet
3.5 mm
Stereo Input Jack
12 Volt DC Adaptor End
with
Overload Protection
Multi-Position
Ratcheting Neck
Specications
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15 Volt DC
Low Volt. Shut Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 VDC +/- 0.3 V
High Volt. Shut Down. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.0-16.0 VDC +/- 0.3 V
Fuse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Amps
Maximum AC Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Watt Max.
Continuous AC Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Watts Max for 20 Mins
Maximum Surge Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 Watts
Ambient Operating Temp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 Deg C - 40 Deg. C
High Temp. Shut Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Deg. C
12 Volt DC Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Amps
USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Volts DC @ 1 Amp
FM Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Less than 100 mw
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 Digit Red LED
5 VOLT DC USB PORT
The USB Port can recharge iPods & other devices that use a USB Port
1. With the vehicle engine’s running, insert the 12 Volt adaptor end into the vehicle’s cigarette lighter plug or 12 Volt Power Port.
2. Insert the USB plug of the device you want to recharge into the USB port of the VRTP4N1.
3. Operate your device normally, as described by the manufacturer.
12 VOLT DC POWER OUTLET
Use the 12VDC Outlet for powering or recharging 12VDC devices while using one of the other outlets.
1. With the vehicle engine’s running, insert the 12 Volt adaptor end into the vehicle’s cigarette lighter plug or 12 Volt Power Port.
2. Insert the plug of the 12 Volt DC device into the 12 Volt DC Power Outlet.
3. Operate your device normally, as described by the manufacturer.
FM TRANSMITTER
1. With the vehicle’s engine running, insert the 12 Volt adaptor end into the vehicle’s cigarette lighter plug or 12 Volt Power Port.
2.Insert the 3.5mm plug of the supplied audio cable into the stereo headphone jack of an MP3, CD, or DVD player. Insert the other end of the cable into the 3.5mm stereo input jack of the VRTP4N1. When the VRTP4N1 detects input voltage it will automati­cally start.
3. Tune your car stereo to one of the 15 pre-set FM frequencies that is not being broadcast on by any local radio stations.
( 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9 106.7, 106.9, 107.1, 107.3, 107.5, 107.7, 107.9 MHz)
5. Press the Channel Up or Channel Down Button to select the FM Preset that you tuned the car stereo to.
6. Press the Play Button on the player that you connected to the VRTP4N1.
7. The Music/Audio will transmit from VRTP4N1 to the vehicle’s FM stereo receiver.
8. Adjust the volume on the audio player to about half the maximum volume, then adjust the volume of the car stereo to suit your listening preferences.
• Do not use more than two of the outlets at a time. Doing so may damage the VRTP4N1, devices connected to it, or the vehicle!
• Make sure any cords to items plugged into the VRTP4N1 are routed in such a way as to not interfere with the safe operation of the vehicle.
Limited Warranty
VIRTUAL REALITY SOUND LABS® products are designed and manufactured to provide a high level of trouble­free performanc e. VIRTUAL REALIT Y SOUND LABS® warrants, to the original purchaser, that its products are free from defects in material and workmanship for 30 days from the date of original purchase, as par t of our commitment to product excellence. VIRTUAL REALITY SOUND LABS® and/or its afliates routinely improves the designs, materials or production methods of its existing products. Because it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice. CONDITIONS OF WARRANTY: If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALITY SOUND LABS® will repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:
1.
All repairs must be performed by VIRTUAL REALITY SOUND LABS® and/or its afliates in Eatontown, New Jersey.
2.
The equipment must not have been altered or been damaged through negligence, accident, or improper operation.
3. The replacement of par ts are exempted from this warranty when replacement is necessary due to normal wear and tear.
4. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5. Repair or replacement parts supplied by VIRTUAL REALIT Y SOUND LABS® under this warranty are pro­tected only for the unexpired portion of the original warranty.
6. In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; cor­rection of antenna problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, accessories or car electrical systems.
7. VIRTUAL REALITY SOUND LABS® will not be responsible for any charge incurred for installation. OWNER’S RESPONSIBILITIES: VIRTUAL REALITY SOUND LABS® will make every ef fort to provide warranty servic e within a reasonable period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSIS­TANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1-800 -445-1797, 8:30am - 4:30pm EST. In order to provide you with the proper warranty service, we request that you adhere to the following procedure:
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.
2. If it is necessar y to return your product for service, please return it securely packed, preferably in the original shipping carton, and freight and insurance prepaid to the following address: VIRTUAL REALITY SOUND LABS,
Service Depar tment, 41 James Way, Eatontown, New Jersey 07724.
3. Please include a detailed explanation of the problem you are having.
4. If your product is found by VIRTUAL REALITY SOUND LABS® to have a defec t in material or workmanship, within the warranty period, it will be repaired or replaced at no charge and returned to you prepaid. Where permit ted by Iaw VIRTUAL REALITY SOUND L ABS® liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the purchaser. VIRTUAL REALIT Y SOUND LABS® makes no other warranty of any kind, expressed or implied; and all implied warranties, are hereby disclaimed by VIRTUAL REALITY SOUND LABS® and excluded from this warranty, VIRTUAL REALIT Y SOUND LABS® and/or its afliates, the manufacturer, distributor and seller shall not be liable for any injur y, loss or damage, incidental or consequential, arising out of the use or intended use of the product.
©2006 Virtual Reality Sound Labs® All designs, logos and images are the exclusive property of Vir tual Reality Sound
Labs® and/or its afliates. All rights reserved. 070706 Printed in China 00000
Loading...