Roadmaster VRFM7W User Manual
Dear Customer,
CONGRATULATIONS. The VRFM7W FM Modulator with built-in MP3/WMA player, when
used as described, will give you great sounds in your car, truck, RV, or mini-van. We have
taken numerous measures in quality control to ensure that your product arrives in top
condition, and will perform to your satisfaction. In the rare event that your VRFM7W FM
Modulator contains a damaged or missing item, does not perform as specified, requires
warranty service, or you have an installation problem, DO NOT RETURN THIS PROD-
UCT TO THE STORE. PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A.
AND CANADA (800-445-1797) and ask to speak with a member of our technical service
team, or submit your questions by e-mail to customerservice@VR-3.com and a member
of our technical service team will respond by e-mail to your questions. Our in-house
technical service team will expedite delivery of your part, advise you on installation, or
help troubleshoot a problem with you. If your product needs warranty service, our
technical service team representatives will help you obtain the fastest remedy possible
under the warranty.
1. Red LED
(Fig.1)
This indicates that the unit has power.
When playing files stored on USB flash
The VRFM7W is not compatible
with Digital Rights Management.(DRM)
Figure 1
drive, the Red LED will flash to indicate
when a file is playing.
2. Channel Frequency Button
(Fig.1)
Pressing this button will change the
frequency from which the VRFM7W
broadcasts.
3. Next
(USB flash memory only)
Track & Playback Volume (Fig.1)
Figure 2
Press this button once to advance to the
next track. Press and hold this button to
increase the volume.
4. Play/Stop
(USB flash memory only)
Press this button once to start playing a
file stored on the USB flash drive. When
a file is playing, press this button to stop
play.
Previous
5.
(USB flash memory only)
Press this button once to return to the
previous file. Press and hold this button
to decrease the volume of the file being
played.
6. Broadcasting Frequency Pre-sets
and Green LED Indicators
Pressing the channel frequency button
will cycle through the pre-set broadcasting frequencies. The Green LED will
light up next to the active pre-set broadcasting frequency. Tune the car’s radio
to the active broadcast channel.
This set complies as of date of manufacture with
FCC rules and regulations Part 15, Subpart C
PARTS INCLUDED: 1 - MP3/WMA player with FM Modulator, 1-Three Foot Audio cable, 1-0.5 Amp Fuse
(Fig.1)
Track & Playback Volume (Fig.1)
(Fig.1)
11.
7. 2.5mm Stereo Input Jack
(Fig.2)
Figure 4
Insert the 2.5mm plug of the supplied
audio cable into this jack, then insert the
3.5mm plug on the other end of the
cable into the headphone jack of any
MP3 player, DVD player, or CD player.
8. 12 Volt DC Adaptor End
(Fig.2)
Insert the 12 Volt DC Adaptor End into
the vehicle’s 12 Volt cigarette lighter
socket or 12 Volt power outlet to supply
power to the unit.
9. USB Flash Memory Slot
(Fig.2)
Insert a USB flash drive containing
MP3/WMA files for playback.
10. 3 Foot Audio Cable with 2.5mm
and 3.5mm Plugs
(Fig.3)
Use this cable to connect various audio
devices to the VRFM7W.
11. Spare 0.5 amp Fuse
(Fig.4)
For Information and Technical Assistance, Call Toll-Free in U.S.A. and Canada.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB WWW.VR-3.COM
1.
With the vehicle running, plug the 12 Volt
adaptor end of the VRFM7W FM Modulator
into the vehicle’s 12 Volt cigarette lighter
socket or 12 Volt Power Outlet.
2. The Red LED will light up indicating the
unit has power. The Green LED will also be
lit at the first position (87.7).
3. Insert a USB flash drive with audio files
saved at a bitrate of 128 Kb per second or
less. Save the files on the drive “loose”
and not in folders.
4.
Press the Channel Frequency Button to
NO WAV FILES.
select one of the following 7 FM Presets with
the least interference that is not being
broadcast on by any local radio stations. When
traveling you may have to switch stations
( 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9 MHz)
5.
Press the Play/Stop button to play the first
file on the flash drive. The Red LED will flash
to indicate the unit is working.
Figure 5
To 12 Volt Outlet
USB Flash Memory Drive
The number of files stored on a
flash memory drive will vary
according to file size. File size is
affected by file format and
bitrate.
The VRFM7W is not compatible
with Digital Rights Management.(DRM)
6. Press the Next Track/Volume Button
once to advance the playback to the
next track. Press and hold this button
to increase the volume of the file being
played.
7. Press the Previous Track/Volume
Button once to return to the previous
file. Press and hold this button to
decrease the volume of the the file
being played.
1. Remove the USB flash drive from the
VRFM7W before using with an external MP3,
CD, or DVD player.
2. With the vehicle running, plug the 12 Volt
adaptor end of the VRFM7W into the
vehicle’s 12 Volt cigarette lighter socket or 12
Volt Power Outlet.
3. The Red LED will light up indicating the
unit has power. The Green LED will also be lit
at the first position (87.7).
4. Insert the larger of the 2 plugs of the
supplied audio cable into the stereo
headphone jack of an MP3, CD, or DVD
player. Insert the smaller plug of the cable
into the jack on the side of the VRFM7W.
5. Tune your car stereo to one of the pre-set
FM frequencies of the VRFM7W with the least
interference that is not being broadcast on by
any local radio stations.
When traveling you
may have to switch stations.
( 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9 MHz)
6. Press the Channel Frequency Button to
select the FM frequency that the car stereo is
tuned to.
7. Press the Play Button on the player that
you connected to the VRFM7W.
8. The
Music/Audio will transmit from
VRFM7W to the vehicle's stereo system.
Figure 6
Supplied Audio Cable
Figure 7
Supplied Audio Cable
Figure 8
Supplied Audio Cable
Portable DVD Player
Figure 9
Discard Bad Fuse
Twist Off
0.5 Amp Replacement Fuse (supplied)
Loading...