Page 1
RIX SA-6 AIR COMPRESSOR
JANUARY 2020 thru DECEMBER 2020
SPARES LIST
Qty Kit COST QTY TOTAL
Ref Part Number Description Req'd Qty Each ordered COST
204-SA6 Maintenance Kit includes shaded items
3RD STAGE
-55 A8-A3309-1 PISTON ASSEMBLY (Incls. A-F) 1 1 $490.15 1 $490.15
8-B2116 A. PISTON 1 $194.75 -
18-B2117-3P B. RIDER RING 2 $13.90 -
18-C1791-4.5P C. COMPRESSION RING 4 $16.70 -
123-012-5 D. O-RING 4 $2.36 -
18-C1603-4.5P E. PRESSURE BREAKER RING 2 $12.30 -
31-A3310 F. PISTON STORAGE TUBE 1 $114.20 -
-56 18-B2117-3P RIDER RING, PISTON FOLLOWER 1 1 $13.90 1 $13.90
A3-B4103 PISTON ROD ASSY (Includes Ball & Follower) 1 $78.00 -
-58 1-A3312 CYLINDER 1 $526.60 -
-75 15-A4151 VALVE STOP 1 $52.00 -
-76 15-B2706 REED VALVE, Inlet & Discharge (Inlet only in SA-6) 2 2 $17.70 2 $35.40
OBSOLETE
OBSOLETE
15-B2753-1 REED VALVE, Discharge (SA-6 ONLY) 1 - -
15-B2707 VALVE SEAT (SA-6 ONLY) 1 - -
-78 15-B3570 VALVE SEAT (SA-6A/B) 1 $123.00 -
-81 2-B4290 HEAD* (SA-6A/B), Stainless Steel 1 $210.50 -
-81 A2-B4290 HEAD ASSEMBLY (no fittings) 1 $400.60 -
-86 123-018-5-90 O-RING, HEAD, Viton, 90 durometer 3 7 $2.36 7 $16.52
-92 54P-6CBUSS FITTING, Inlet 3rd Stage Head (& 2nd Separator), S/S $41.30 -
-94 54P-4FBUSS FITTING, Discharge 3rd Stage Head, S/S $18.10 -
$1,239.00
$0.00
*SA-6A/B head has a removable plug in the center. If replacing old style head, new head assy required. See page 4 for model identification.
Common 2nd & 3rd stage Components
-69 17-758 PIN, Valve (2 per stage) 4 4 $2.36 4 $9.44
-71 54P-4P50NSS HEAD PLUG (SA-6A/B) 2 $10.90 -
Do not assemble with dry threads
If leaking replace o-ring, do not over-tighten
-71A 123-904-5-90 O-RING, HEAD PLUG (SA-6A/B) Viton, 90 durometer 2 3 $2.36 3 $7.08
-71A 123-904-3 Alt 3rd stg O-ring, Teflon, Hi temp, over 3500 psi 2 2 $6.05 2 $12.10
(Heat to expand or use tapered rod to expand Teflon
o-ring before installation onto plug)
2ND STAGE
-61 1-A3300-2 CYLINDER 1 $271.70 -
-62 8-A3313 PISTON 1 $91.05 -
-63 18-B2117-2B RIDER RING 1 1 $24.20 1 $24.20
-64 123-210-5 O-RING, Rider Expander, Viton 1 1 $3.62 1 $3.62
-65 18-C1791-10B PISTON RING 1 1 $24.80 1 $24.80
-66 123-313-5 O-RING, Piston Ring Expander, Viton 1 1 $3.62 1 $3.62
A9489
Note: Part numbers herein supercede those in service manual
Page 1 of 5
Page 2
RIX SA-6 AIR COMPRESSOR
JANUARY 2020 thru DECEMBER 2020
SPARES LIST
Qty Kit COST QTY TOTAL
Ref Part Number Description Req'd Qty Each ordered COST
-67 123-028-5 O-RING, HEAD, Viton 3 7 $2.36 7 $16.52
-68 15-B2713 REED VALVE, Inlet & Discharge (Inlet only SA-6) 2 2 $26.40 2 $52.80
obsolete 15-B2753 -
-72 15-A4193-2 VALVE STOP, Stainless 1 $54.65 -
-73 2-B4359-2 HEAD* (SA-6A/B), Stainless Steel 1 $320.00 -
-73 A2-B4359-2 HEAD ASSEMBLY, Stainless 1 $550.00 -
-74 15-B3569 VALVE SEAT (SA-6A/B) 1 $207.45 -
obsolete 15-B2712 VALVE SEAT* (SA-6) – convert to head assembly (ref –73)
-87 54P-8VBTXSS FITTING, Suction 2nd Stage Head & Discharge 1st, Stainless 1 $98.95 -
-88 54P-6FBUSS FITTING, Outlet 2nd Stage Head & Separator, Stainless 1 $24.90 -
-105 3-A3896-2 PISTON ROD 1 $72.65 -
*Replacement for original SA-6 head. Purchase head assembly if replacing SA-6 head. See page 4 for model identification.
-34 2-B2783 HEAD $390.00 -
A2-B2783 HEAD ASSY (gasket & fasteners included) $583.30 -
-35 15-A3718 VALVE SEAT 1 $140.30 -
-36 15-A3719 VALVE, INLET 1 1 $60.75 1 $60.75
-37 34-607 CAP SCREW, VALVE 2 $2.36 -
-38 15-A3720 VALVE, DISCHARGE 1 1 $11.70 1 $11.70
-39 16-A3717-1 GASKET, HEAD (torque 15-17 ft-lbs.) 1 2 $15.95 2 $31.90
-40 123-042-5 O-RING, HEAD - Viton 1 2 $3.62 2 $7.24
-41 15-A3946 PLATE, VALVE BACKING 1 $15.35 -
-42 17-410 SPRING PIN 1 1 $2.36 1 $2.36
-43 18-C1791-24B PISTON RING 1 1 $55.85 1 $55.85
-44 123-230-5 O-RING, EXPANDER - Viton 1 1 $3.62 1 $3.62
-45 18-B2117-1B RIDER RING 1 1 $45.55 1 $45.55
A8-B2118 PISTON / ROD ASSY 1 $408.70 -
-48 1-A3300-1 CYLINDER 1 $274.95 -
REED VALVE, DISCH* (SA-6) – convert to head assembly (ref –73)
1ST STAGE
-9 42-11506 COOLING FAN - 6 blade (replaces all other fans) 1 $16.50 -
-12 135-A4218-5 FAN WASHERS - PLATES (to convert from obsolete fan) 2 $56.60 -
-13 44-B2113 COUNTERWEIGHT 1 $130.50 -
-20 181-304 BEARING, THRUST 2 $9.10 -
-21 181-305 BEARING, WOBBLE 1 $112.35 -
-22 181-A4124 BEARING, MAIN 2 $93.25 -
-26 148-C1374 COOLING SHROUD 1 $429.85 -
-30 24-506 WASHER, SPRING-WAVE 1 $3.62 -
-49 53-4103 NUT, ROD, All Stages, 3/8-24 5 $2.36 -
7-A4359 END BEARING, CON ROD (All Stages) 3 $403.60 -
-51 A7-A3302-1 END BEARING, WITH ROD ADAPTOR, 1st/2nd 2 $665.35 -
-60 A7-A3302-2 END BEARING, WITH ROD ADAPTOR, 3rd Stg. 1 $679.50 -
Note: Part numbers herein supercede those in service manual
MISC PUMP PARTS
Assembly required, or assembled as follows:
A9489
Page 2 of 5
Page 3
RIX SA-6 AIR COMPRESSOR
JANUARY 2020 thru DECEMBER 2020
SPARES LIST
Qty Kit COST QTY TOTAL
Ref Part Number Description Req'd Qty Each ordered COST
-52 317-A3306 GUIDE PIN, END BEARING (All Stages) 6 6 $9.25 6 $55.50
-53 34-A3307 ROD END BOLT 3 $56.15 -
-54 20-A3308 WASHER, ROD END 3 $11.15 -
-102 40-A3322 THRUST RIDER 2 $305.00 -
-122 84-100 GROMMET, SHROUD 2 $2.36 -
MOISTURE SEPARATORS, TABLE 7-2
- A208-A7114-5 SEPARATOR ASSY, 2ND STAGE (No fittings) $834.65 -
- A208-A7114-3 SEPARATOR ASSY, 3RD STAGE (No fittings) $643.50 -
-6 715-62 DRAIN VALVE (soft seat) 2 $46.25 -
-4 77-27 FILTER TUBE 2 $21.45 -
-2 123-912-5 O-RING 2 $2.36 -
RELIEF VALVES
515-907-1 RELIEF VALVE, 3RD STG. set @ 3600 PSI 1 $247.80 -
515-907-2 RELIEF VALVE, 3RD STG. set @ 4000 PSI 1 $213.15 -
515-907-4 RELIEF VALVE, 3RD STG. set @ 4500 PSI 1 $213.15 -
515-907-3 RELIEF VALVE, 3RD STG. set @ 5000 PSI 1 $213.15 -
-8 515-269 RELIEF VALVE, 2ND STG. set @ 1000 PSI 1 $287.15 -
-108 515-11388 RELIEF VALVE, 1ST STG - set @ 150 PSI 1 $80.95 -
Note: Separator on left side is 3rd stage, separator on right is 2nd stage
1st stage relief valve is mounted to 1st stage cylinder head
COOLING COILS
-112 55-D2106 TUBING COIL - 1/2 O.D., 1ST STAGE 1 $115.05 -
-113 55-D2106-1 TUBING COIL - 3/8 O.D., 2ND STAGE 1 $178.25 -
-114 55-D2106-2 TUBE, RETURN - 3/8 O.D., 2ND STAGE RETURN 1 $98.70 -
-115 55-D2106-3 TUBING COIL - 1/4 O.D., 3RD STAGE 1 $96.70 -
MISCELLANEOUS ITEMS
A88-A8275 TOOL - MAIN & WOBBLE Bearing Removal $544.25 -
***A45-110 RIX GREASE (for connecting rods) 1 $43.75 -
81-160 Grease Gun 1 $78.50 -
45-1007 O-RING LUBE (Krytox, 2 oz) 1 1 $153.25 1 $153.25
A77-623 INLET FILTER 1 1 $238.75 1 $238.75
73-423 VINYL HOSE FOR INLET FILTER 3/4" ID X 1" OD 15' $3.62 PER FOOT
41-BX42-1 V-BELT 1 $31.80 -
41-3VX425-1 V-BELT (DUAL BELT DRIVE) 2 $44.15 -
204-799 DUAL BELT CONVERSION KIT, ELECTRIC DRIVE $609.10 -
204-800 DUAL BELT KIT, GAS ENGINE (belts & sheave included) $334.30 -
A116-432 BACK PRESSURE REGULATOR 1 $239.35 -
204-7 BPR repair kit (includes poppet, ball, seat & o-rings) $49.55 -
60-295 PRESSURE GAUGE, 6000 PSI scale 1 $142.05 -
Note: Part numbers herein supercede those in service manual
A9489
Page 3 of 5
Page 4
RIX SA-6 AIR COMPRESSOR
JANUARY 2020 thru DECEMBER 2020
SPARES LIST
Qty Kit COST QTY TOTAL
Ref Part Number Description Req'd Qty Each ordered COST
76-191 PRESSURE SWITCH (Adjustable to 4500 PSI) 1 $756.25 -
615-52 CHECK VALVE $77.60 -
A73-433-3 3 FT, 5,000 PSI FLEX HOSE $95.30 -
A73-433-5 5 FT, 5,000 PSI FLEX HOSE $102.30 -
A73-433-10 10 FT, 5,000 PSI FLEX HOSE $219.70 -
54P-44FTXSS MALE CONNECTOR (HP flex hose to 1/4" FNPT) Stainless $12.95 -
54P-1/4FFSS NIPPLE, 1/4", 1.5" Long, Stainless $16.15 -
A554-539 SCBA ADAPTOR, 3300 PSI (with tee & bleed valve) $156.35 -
554-538-1 SCBA NIPPLE TIP (3300 PSI ADAPTER) $13.65 -
A554-541 SCUBA YOKE (with 1/4" pipe nipple) $273.50 -
A307-14 FUEL PUMP for SA-6G Wisconsin Engine, with installation kit $180.50 -
MAN-SA6B SA-6B service manual $73.00 -
MAN-SA6A OBSOLETE, REPLACED BY SA-6B MANUAL -
MAN-SA6 OBSOLETE, REPLACED BY SA-6B MANUAL -
AIR PURIFICATION CARTRIDGES
207-50 3 LB. (33" Long, 2 o-rings on nipple) Plastic housing $160.25 -
207-50-B 3 LB. (33" Long, 2 o-rings on nipple) Metal housing $316.90 -
207-40 3 LB. (33" Long, 1 o-ring, inverted nipple) Plastic housing $128.85 -
207-48 1 LB (16” Long, 2 o-rings on nipple) Plastic housing $115.25 -
554-553 Dryer adapter fitting, converts ‘207-50’ housing to use $25.13 -
207-40 cartridge
A357-3 ELEMENT KIT, VISUAL INDICATOR (H20 only) $22.85 -
OP-1R Dryer package (1 lb cartridge) $3,517.00
OP-3R Dryer package (3 lb cartridge) $4,650.00
OP-3R2 Dryer package (3 lb cartridge, 2 fill hoses) $5,000.00
(Fill adapters must be ordered sepratley)
***Grease every 25 hours minimum or every three months. This is a special
lubricant required for sustained high pressure load. Use no substitute.
Compressor model numbers are determined as follows:
S/N's up to 6858 = SA-6
6859 to 7899 = SA-6A (new design 2nd & 3rd stage heads with removable plug, 3rd stage piston rod
1st & 2nd stage stainless steel cooling coils)
7900 and later = SA-6B (dual V-belt drive and 8 blade cooling fan)
Prices subject to change without notice
All pricing in U.S. Dollars, FOB RIX. $150 minimum. Expedite fee 20% of order with $150 min.
Export fee may apply
Phone 707-747-5900, ext 277 Fax 707-748-0398
Total $1,376.62
Note: Under no circumstance should this compressor be used for compressing oxygen or oxygen enriched air or gases.
Note: Part numbers herein supercede those in service manual
A9489
Page 4 of 5
Page 5
RIX SA-6 AIR COMPRESSOR
JANUARY 2020 thru DECEMBER 2020
SPARES LIST
Qty Kit COST QTY TOTAL
Ref Part Number Description Req'd Qty Each ordered COST
Note: Part numbers herein supercede those in service manual
A9489
Page 5 of 5
Loading...