Rinnai RH-993CT Use And Care Manual

USE AND CARE GUIDE

WALL MOUNTED HOOD

Fig.1

Fig.2 Fig.3

Fig.4 Fig.5

A B

Fig.6 Fig.7

Fig.8 Fig.9

Fig.10 Fig.11

Fig.14

Fig.15

GENERAL

Carefully read the following important information regarding installation
safety and maintenance. Keep this information booklet accessible for further
consultations. The appliance has been designed for use in the ducting
version (air exhaust to the outside – Fig.1B), filtering version (air circulation
on the inside – Fig.1A) or with external motor (Fig.1C).

SAFETY PRECAUTION

1. Please take note that when the cooker hood is operating simultaneously

with an open fireplace or burner that depend on the air in the environment,
the cooker hood may removes the air from the environment which a burner
or fireplace need for combustion. The negative pressure in the environment
must not exceed 4Pa (4x10-5 bar). Provide adequate ventilation in the
environment for a safe operation of the cooker hood. Follow the local laws
applicable for external air evacuation.

Before connecting the model to the electricity network:

- control the data plate (positioned inside the appliance) to ascertain that the
voltage and power correspond to the network and the socket is suitable. If in
doubt please ask qualified electrician for help.