RIDGID SAE SR-M Series, SAE Q Series, SAE D-XL Series, SAE E Series, SAE D Series Installation Instructions Manual
...
INSTALLATION INSTRUCTIONS
SAE COMPLIANT LIGHTS
*THESE INSTRUCTIONS ARE FOR THE FOLLOWING LIGHTS:
(2) SAE SR-M
®
, (2) SAE D-XL
®
, (2) SAE Q-SERIES
®
IMPORTANT
THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE.
Please read through all of these Instructions and tips before proceeding with the installation.
We do our best to provide a simple installation process for all applications however
a professional installation is always recommended.
Always disconnect any power sources connected to your vehicle
before servicing fuses or electrical systems.
WIRING INSTRUCTIONS
SAE D-SERIES
1. Place 5/16-18 Carriage Bolt (E) into
Mounting Bracket (D).
2. Use M6 Allen Socket Head (B) and
M6 Nyloc Nut (C) to attach Mounting
Bracket (D) to Housing (A).
3. Drill a 5/16” hole into desired
mounting location.
4. Use 5/16”: Flat Washer (F), Lock
Washer (G), and Nut (H) to secure
light assembly to vehicle.
5. Tighten all hardware.
SAE E-SERIES
1. Place 1/4-20x1” hex head bolt (C)
into Light housing (A).
2. Next insert mount bushing onto
the 1/4-20 hex head bolt (C).
3. Choose desired mounting height
and place supplied mounting
bracket (E) over mounting stud (C).
4. Secure the mounting assembly
with 1/4” at washer (D) and 1/4-20
Nyloc nut (B).
5. Tighten all hardware.
A - LED Light (Housing)
B - M6 Allen Socket
Head (2)
C - M6 Nyloc Nut (2)
D - Mounting Bracket
B - 1/4-20 Nyloc Nut
C - 1/4-20 HEX Bolt
D - 1/4” Flat Washer
* Long and short brackets provided for additional mounting congurations
E - 5/16-18 Carriage Bolt
F - 5/16” Flat Washer
G - 5/16” Flat Washer
H - 5/16-18 Nut
E - Mounting BracketA - LED Light (Housing)
SAE SR-SERIES
1. Place 1/4-20x1” hex head bolt (C)
into Light housing (A).
2. Next insert mount bushing onto
the 1/4-20 hex head bolt (C).
3. Choose desired mounting height
and place supplied mounting
bracket (E) over mounting stud (C).
4. Secure the mounting assembly
with 1/4” at washer (D) and 1/4-20
Nyloc nut (B).
5. Tighten all hardware.
E - Mounting BracketA - LED Light (Housing)
B - 1/4-20 Nyloc Nut
C - 1/4-20 HEX Bolt
D - 1/4” Flat Washer
* Long and short brackets provided for additional mounting congurations
Loading...