Ricoh st33 Modification Bulletin

RICOH Modification

Bulletin

PAGE: 1/1

Model:

Modified Article:
From:
Reason for
Modification:

Please correct your parts catalog as follows:

part number

Cattleya 20bin sorter stapler

Parts catalog correction

Technical Service Dept., GTS Division

Parts catalog correction
To facilitate assembly
Part standardization

Incorrect

A6641875 A8312562 Joint Arm 1-1 3 21
A6976200 A8314511 Stud screw – M4 1-1 3 22

Correct part

number

Description Q’ty Int Page Index Note

Date:

Vendor change
To improve reliability
Other

15-Dec-99

Prepared by:

No.:

H. Matsui

To meet standards

( )

MA831001

 M

odification

B

ulletin

PAGE: 1/1

Model:

Modified Article:
From:
Reason for
Modification:

Please correct your parts catalog as follows:

Part number Description Page Incorrect

NOTE: Please make followi ng corrections:

1. Index callout # for P/No.A8312562 and A8314511 were incorrect. Index callout # for

Cattleya 20bin sorter stapler

Parts catalog correction

Technical Service Dept., GTS Division

Parts catalog correction
To facilitate assembly
Part standardization

A8312562 Joint Arm 3 15 21
A8314511 Stud Screw – M4 3 16 22

these two items should be #21 and #22. (Please refer to the previous MB #MA831001
issued on Dec. 15. 1999)

Date:

Vendor change
To improve reliability
Other

31-Jan-00

Prepared by:

Correct

Index

No.:

H. Matsui

To meet standards

( )

Index

MA831002

2. P/No. A8311645 (Hinge Bracket : callout #14) is available only as an assembly.
Therefore, callouts #15 and #16 should be deleted. Please replace the illustration with
the following corre ct one: