
Ricoh MP 201SPF Quick Guide
Originals should be face-up in the document feeder, face-down on glass
Push the Clear Modes button before carrying out jobs
Copy
BASIC COPY
1. Select the Copy button
2. Place your originals in the document feeder
3. Select the number of copies using the blue number keys
4. Press the Sort button if you wish to have your copies collated or sorted.
5. Press the green Start button
© Page 1 of 5

2 SIDED COPIES (DUPLEX)
1. Place your originals in the document feeder
2. Press the Duplex button
3. Press the arrow up or down keys to select style of 2 sided you would like
4. Press the OK key to confirm your selection, the word Programmed will appear at the
top of the display
5. Press the Start button
2 SIDED ORIGINALS INTO 1 SIDED COPIES
1. Place your originals in the document feeder
2. Press the Combine/Series button
3. Press the arrow up or down keys to the last screen and ensure 2 sided originals to 1
sided copy is highlighted
4. Press the OK key to confirm your selection, the word Programmed will appear at the
top of the display
5. Press the Start button
REDUCE OR ENLARGE COPIES
1. Place your originals in the document feeder or on the glass
2. Press the R/E button on the panel display
3. Press the arrow button below R/E. Press this button until you have highlighted the
option you would like
4. Press the OK button to confirm your selection
5. Press the Start button
Fax
SEND A FAX
1. Select the Facsimile button
2. Dial the number using the blue numeric key pad or press the pre programmed button(s)
on the left hand side
3. Place your originals in the document feeder or on the glass
4. Press the Start button
If you have placed your originals on the glass, once you have dialed the number and pressed the Start
button, the display will start a 60 second countdown. This is allowing you to change the original, place
© Page 2 of 5