Ricoh iris QUICK GUIDE llac u
1. Basics
How to Make a Copy........................................................................
page 2
2. Color Balance Adjustment
Adjusting the Color Balance.............................................................
page 4
3. Color Conversion
Converting a Selected Color into a Different Color ..........................
page 6
4. Area Editing Example (Only for Edit type)
Filling a Background Area with a Color ............................................
page 8
5. Area Editing Summary (Only for Edit type)
Other Area Editing Functions ...........................................................
page 10
6. Front & Back Cover
Copying Front and Back Covers ......................................................
page 12
7. Summary
Features at a Glance........................................................................
This machine comes in two models referred to in this manual as Basic type and Edit type.
Check the inside front cover of the Operating Instructions for the model you have before
reading this guide.
Some limitations may apply to functions—for details please refer to the Operating Instructions.
The copy samples in this guide differ somewhat from actual copies due to printing effects.
page 14
Basics
How to Make a Copy
In this situation... Use this function...
You wish to make a copy in the same color
and the same size as your original.
This machine has the following functions:
• Auto Color Select
• Auto Text/Photo
• Auto Paper Select
Set the
original.
Selects a suitable color automatically.
Selects a suitable original image type au-
tomatically.
Selects a suitable paper size automatically .
Make sure that
following functions are se-
lected:
• [Full Color]
• [Auto Text/Photo]
• [Auto Paper Select]
• [Full Size]
2
Face down
Tip
In the document feederOn the exposure glass(platen glass)
Face up
To check the number
of copies made so far ,
press the Counter
key.
Press the
Start key.
3
Color Balance Adjustment
Adjusting the Color Balance
In this situation... Use this function...
Copies are too yellow.
The Color Balance function allows you to
control the overall color tone of copies.
4
Set the
original.
Adjust the
color tone.
Press the
Adjustment key.
Tip
You can alter up to three single colors by mixing them with adjacent
colors in the color circle.
1. Press the Adjustment key.
2. Press the [Color Adjustment] key.
3. Select the color that you want to adjust from the color circle.
4. Adjust the color with the [ ] or [ ] key.
5. Press the [OK] key.
Press the
[OK] key.
Press the
Start key.
5
Loading...