Ricoh FT8982, FT680 OPERATING INSTRUCTIONS
TABLE OF CONTENTS
TABLE OF CONTENTS
WHERE IS IT & WHAT IS IT
COPIER EXTERIOR ......................................................................................2
COPIER INTERIOR....................................................................................... 4
OPERATION UNIT .......................................................................................6
Touch Panel Display ....................................................................................7
WHAT YOU CAN DO WITH THIS COPIER
FUNCTIONS.................................................................................................. 10
BASIC
STARTING THE COPIER .............................................................................20
When The Main Switch Is In The Stand-by Position ...................................20
When The Touch Panel Display Is Off ........................................................21
When The Copier Is Set For User Codes....................................................21
When The Copier Has Been Turned Off By The Weekly Timer.................22
USING THE TOUCH PANEL DISPLAY ....................................................... 23
GETTING HELP ON THE DISPLAY............................................................. 25
Seeking Guidance In The Stand-by Condition ............................................25
Seeking Guidance While Entering Copy Job Settings.................................26
RECOMMENDED & NON-RECOMMENDED ORIGINALS..........................27
Recommended Originals ..............................................................................27
Non-recommended Originals For The Document Feeder ...........................27
SETTING A STACK OF ORIGINALS IN THE DOCUMENT FEEDER
(ADF, ARDF)................................................................................................. 28
SETTING ONE ORIGINAL AT A TIME IN THE DOCUMENT FEEDER
(SADF)...........................................................................................................29
SETTING ORIGINALS ON THE EXPOSURE GLASS ................................ 31
SETTING COMPUTER FORMS ON THE DOCUMENT FEEDER...............32
iii
TABLE OF CONTENTS
SETTING ONE ORIGINAL IN THE MOVING-ORIGINAL SCAN TABLE ... 35
PROOF COPYING.........................................................................................36
COPYING
BASIC OPERATIONS...................................................................................38
One-to-one Copying .................................................................................... 38
Adjusting Copy Image Density.................................................................... 40
Selecting The Copy Paper Size (Manual Paper Select) ............................ 41
Having The Copier Choose The Paper Size (Auto Paper Select).............. 41
Having The Copier Choose The Reproduction Ratios
(Auto Reduce/Enlarge)................................................................................ 44
Temporarily Stopping One Job To Copy Something Else
(Interrupt Copying) ....................................................................................... 45
Storing Your Copy Settings In Memory (Program).....................................48
Setting Special Functions (Special Feature) .............................................. 50
Entering Copy Job Settings During The Warm-up Period (Auto Start) ...... 53
COPYING FROM THE BYPASS TRAY .......................................................54
COPYING FROM THE BYPASS TABLE IN THE MOVING-ORIGINAL
SCAN MODE.................................................................................................55
REDUCING AND ENLARGING.................................................................... 57
Reducing And Enlarging Using Preset Ratios (Preset R/E) ......................57
Reducing And Enlarging In 1% Steps (Zoom)............................................58
Fitting The Original To A Copy Of A Different Size
(Size Magnification)..................................................................................... 60
WORKING WITH BOTH SIDES OF ORIGINALS AND COPIES (Duplex) .61
Making Two-sided Copies From One-sided Originals
(1 Sided Originals → 2 Sided Copy) .......................................................... 61
Making Two-Sided Copies From Two-Sided Originals
(2 Sided Original → 2 Sided Copy)............................................................. 62
Making One-Sided Copies From Two-sided Originals
(2 Sided Original → 1 Sided Copies) .........................................................63
ADDING MARGINS FOR BINDING (Margin Adjustment).........................64
Margin For One-sided Copying .................................................................. 64
iv
TABLE OF CONTENTS
Margin For Two-sided Copying ....................................................................65
EDITING THE COPY IMAGE (Edit Image) ..................................................66
Erasing Part Of Original Image ....................................................................66
Erasing The Center Margin And Surrounding Area Of The Original Image
(Cent./Bord.) ................................................................................................69
Merging Images (Overlay) ...........................................................................70
Editing The Copy Image When Making Two Sided Copies .......................71
ADDING OR INSERTING SHEETS (Cover/Slip Sheet )............................73
Copying The Front Cover Of The Originals ................................................73
Copying The Front And Back Covers Of The Originals..............................74
Adding A Front Cover Sheet .......................................................................76
Adding Front And Back Cover Sheets ........................................................77
Copying Designated Pages Of Originals Onto Slip Sheets
(Paper Designate) .......................................................................................78
Copying Designated Pages Of Originals Onto Tab Sheets
(Tab Sheet) ...............................................................................................80
Inserting Slip Sheets Between OHP Transparencies
(OHP Slip Sheet) .......................................................................................84
FINISHING..................................................................................................... 85
Sorting Into Sets When The Number Of Originals Is 70 Or Less
(123, 123, 123) (Sort)...................................................................................85
Sorting Into Sets When The Number Of Originals Is More Than 70
(123, 123, 123) (Large Volume Sort)...........................................................87
Stacking Together All Copies Of A Page
(111, 222, 333) (Stack)...............................................................................89
Stapling Copies (Staple) ..............................................................................90
COMBINATION CHART................................................................................ 94
WHAT TO DO IF SOMETHING GOES WRONG
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT .......................98
IF YOU CANNOT MAKE COPIES AS YOU WANT ....................................100
LOADING PAPER......................................................................................... 101
Non-recommended Paper For Paper Trays.................................................101
Notes For Paper ...........................................................................................101
v
TABLE OF CONTENTS
Loading Paper In The 500-sheet Paper Tray (Tray 1 and 2)..................... 102
Loading Paper In The 1,700-sheet Paper Tray (Tray 3) ............................ 103
Loading Paper In The Optional Large Capacity Tray (Tray T)................... 104
Loading Tab Sheets In the Tray 2 .............................................................. 105
ADDING TONER ...........................................................................................107
ADDING STAPLES .......................................................................................108
CLEARING MISFEEDS................................................................................109
Check The Misfeed Location Display .......................................................... 109
Rearranging Originals After Clearing Misfed Paper .................................... 110
Clearing Paper Misfeeds............................................................................. 111
Clearing Original Misfeeds ..........................................................................112
CHANGING THE COPIER’S SETTINGS
CHANGING PAPER SIZE .............................................................................114
500-sheet Paper Trays (Tray 1 and 2)........................................................114
USER TOOLS ................................................................................................ 116
How To Access User Tools......................................................................... 116
User Tool Menu ........................................................................................... 117
SERVICE REPRESENTATIVE SETTING .....................................................129
MAINTAINING YOUR COPIER
WHERE TO PUT YOUR COPIER
DO’S AND DON’TS
REMARKS
USE AND STORAGE OF SUPPLIES
MAINTAINING YOUR COPIER..................................................................... 132
Operation Unit.............................................................................................. 132
Document Feeder........................................................................................133
WHERE TO PUT YOUR COPIER .................................................................134
Copier Environment ..................................................................................... 134
Power Connection .......................................................................................134
Access To Copier........................................................................................ 135
vi
TABLE OF CONTENTS
DO’S AND DON’TS.......................................................................................135
Copier...........................................................................................................135
Document Feeder.........................................................................................136
REMARKS.....................................................................................................137
Copier...........................................................................................................137
Sorter Stapler (Option).................................................................................138
USE AND STORAGE OF SUPPLIES........................................................... 138
Copy Paper ..................................................................................................138
Paper Storage ..............................................................................................139
Toner Storage ..............................................................................................139
SPECIFICATIONS
COPIER .........................................................................................................142
DOCUMENT FEEDER...................................................................................145
SORTER STAPLER (OPTION) .....................................................................147
LARGE CAPACITY TRAY (LCT) (OPTION) ................................................148
INDEX
INDEX ............................................................................................................ 150
vii
TABLE OF CONTENTS
viii
INTRODUCTION
INTRODUCTION
This manual contains detailed instructions on the operation and maintenance of this copier. To get maximum versatility from this copier, all
operators should carefully read and follow the instructions in this manual.
Please keep this manual in a handy place near the machine.
Please read the next section before using this copier. It contains important
information related to USER SAFETY and PREVENTING EQUIPMENT
PROBLEMS.
SAFETY INFORMATION
When using your copier, the following safety precautions should always be
followed.
Safety During Operation
In this manual, all safety messages are identified by the words "WARNING"
and "CAUTION". These words mean the following:
WARNING: Important information to alert you to a situation that might
cause serious injury and damage to your property if instructions are not followed.
CAUTION: Important information that tells how to prevent damage to equip-
ment, or how to avoid a situation that might cause minor injury.
WARNINGS:
Since some parts of the copier are supplied with high electrical volt-
age, touch only the parts specified in this manual.
Do not modify or replace any parts other than the ones specified in
this manual.
Do not incinerate toner or toner containers. Toner dust might ignite
when exposed to open flames.
Do not store toner where it will be exposed to heat.
Do not eat or swallow toner, and keep it out of reach of children.
i
SAFETY INFORMATION
The fusing section can be very hot. Be careful when handling it.
CAUTIONS:
While copying, do not turn off the main switch.
While copying, do not open the front doors.
While copying, do not lift the document feeder.
While copying, do not unplug the power cord.
Do not lay anything weighing more than 10 kg, 22 lb on the exposure glass.
Do not place tools or other hard objects on the exposure glass.
Keep corrosive liquids, such as acid, off the machine.
Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.
General Safety Information
❐ Always turn the copier off when you have finished copying for the day, but
leave it p lugged in.
❐ When the copier will not be used for a long period, disconnect the power cord.
❐ If the copi er must be tran sported by v ehicle, plea se contact you r service rep re-
sentativ e.
❐ When the ma in switch is in the Stand-by posi tion, the antico ndensation heaters
are on. In case of emergency, unplug the machine’s power cord.
❐ To disconnect the power source, the main plug must be pulled.
ii
WHERE IS IT
& WHAT IS IT
WHERE IS IT & WHAT IS IT
1
14
COPIER EXTERIOR
COPIER EXTERIOR
3
2
4
1
15
5
6
10
12
13
7
8
11
9
2
COPIER EXTERIOR
1. Operation unit Operator controls and indicators are located here.
2. Document feeder Originals inserted into the document feeder are
individually and automatically fed onto and removed from the exposure glass. ☛ See page 27.
3. Moving-original
☛ See pages 35 and 55.
scan table
4. Exposure glass Position originals here face down for copying.
5. Bypass table ☛ See pages 54 and 55.
6. 3000-sheet large
capacity tray
This tray can hold 3,000 sheets of copy paper.
☛ See page 104.
(TrayT) (Option)
7. Main switch Switches the copier between on and stand-by
conditions ("stand-by" means that the anticondensation heaters are on).
8. Front doors Open to access the inside of the copier.
9. 1,700-sheet tray
(Tray 3)
10. 500-sheet tray
(Tray 1)
11. 500-sheet tray
(Tray 2)
This tray can hold 1,700 sheets of copy paper.
☛ See page 103.
This tray can hold 500 sheets of copy paper. ☛
See page 102.
This tray can hold 500 sheets of copy paper. ☛
See page 102.
12. Bypass exit tray
13. Sorter staplers
(Option)
Copies will be sorted, stacked, or stapled here.
☛ See page 85.
14. Proof tray When the optional sorter stapler is installed, com-
pleted copies are delivered here not in the Finishing mode.
WHERE IS IT & WHAT IS IT
15. Auto response
sensor
❐ Other options: key counter, key counter holder, key counter bracket set
When operator stands in front of this sensor, the
copier automatically turns off the Screen Saver.
3
COPIER INTERIOR
3
COPIER INTERIOR
2
1
4
COPIER INTERIOR
1. Fusing Unit Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
2. Unit for two-sided
This unit is used to make two-sided copies.
copying
3. Toner Cartridge Replace the toner cartridge when the copier in-
structs you to add toner.
WHERE IS IT & WHAT IS IT
5
INTERRUPT KEY
Press to make interrupt
copies during a copy
run. ☛
See page 45.
CLEAR MODES KEY
Press to clear the
copier of previously
entered settings and
functions.
OPERATION UNIT
OPERATION UNIT
BRIGHTNESS
KNOB
You can change the
brightness of the
display.
GUIDANCE KEY
Press to see
guidance of
functions.
☛
page 25.
1234
TOUCH PANEL DISPLAY
You can see the operation status
and messages here.
☛
PROGRAM/SPECIAL
See
FEATURE KEY
☛ See pages 48 and 50.
5
See page 7.
ANGLE ADJUSTMENT
LEVER
You can change the
direction of the operation
unit up and down.
10 KEYS
Use to enter the
desired number of
copies. They are also
used to enter data for
selected functions.
6
67
890
C
CLEAR/STOP KEY
Press to cancel the copy
number entered. While copying,
press to stop copying.
START KEY
Press to start copying.
OPERATION UNIT
Touch Panel Display
Initial Display
COPY COUNTER
Indicates the number of copies
entered, and the number of copies
made.
To operate the machine, touch the key you want to use. Then, the display
instructs what to do next.
❐ Regarding deta iled inform atio n ab out each k ey a nd f unctio n, ☛ see page 10.
❐ For how to use the touch panel display, ☛ see page 23.
WHERE IS IT & WHAT IS IT
7
OPERATION UNIT
8
WHAT YOU CAN DO
WITH THIS COPIER
THIS COPIER
WHAT YOU CAN DO WITH
9
☛ See page 40.
☛ See page 40.
☛ See page 41.
☛ See page 57.
☛ See page 50.
☛ See page 53.
☛ See page 36.
FUNCTIONS
FUNCTIONS
☛ See page 41.
☛ See page 39.
☛ See page 44.
☛ See page 85.
☛ See page 73.
☛ See page 66.
☛ See page 64.
☛ See page 61.
Temporarily stopping one job to copy something else
Storing your copy settings in memory
Special Feature
Entering copy job settings during the warm-up period
10
☛ See page 45.
☛ See page 48.
Copying from the bypass table
☛ See page 54.
☛ See page 55.
☛ See page 57.
Copying from the bypass table in the Moving-original
scan mode
Reducing and enlarging
Reducing and enlarging using preset ratios
Reducing and enlarging with the [+- set] key
Reducing and enlarging with the [10 key set] key
FUNCTIONS
THIS COPIER
WHAT YOU CAN DO WITH
Fitting the original to a copy of a different size
11
☛ See page 61.
FUNCTIONS
Working with both sides of originals and copies
Making two-sided copies from one-sided originals
Making two-sided copies from two-sided originals
Making one-sided copies from two-sided originals
12
Adding margins for binding
☛ See page 64.
Margin for one-sided copying
Margin for two-sided copying
FUNCTIONS
THIS COPIER
WHAT YOU CAN DO WITH
13
☛ See page 66.
FUNCTIONS
Editing the copy image
Erasing parts of original image
Merging images
Save Area
Save Area
Editing the copy image when making two-sided copies
Save Area Delete Area
14
Adding or inserting sheets
☛ See page 73.
Copying the front cover of the originals
Copying the front and back covers of the originals
FUNCTIONS
THIS COPIER
WHAT YOU CAN DO WITH
Adding a front cover sheet
Adding front and back cover sheets
15
FUNCTIONS
Copying designated pages of originals onto slip sheets
Copying designated pages of originals onto tab sheets
Inserting slip sheets between OHP transparencies
16
Finishing
☛ See page 85.
Sorting into sets when the number of originals is 70 or less
(123,123,123)
Sorting into sets when the number of originals is more than 70
(123,123,123)
FUNCTIONS
Stacking together all copies of a page (111, 222, 333)
Stapling copies
THIS COPIER
WHAT YOU CAN DO WITH
17
FUNCTIONS
18
BASICS
19
BASIC
STARTING THE COPIER
STARTING THE COPIER
When The Main Switch Is In The Stand-by Position
Turn on the main switch.
1
Wait for the copier to warm-up.
2
During the warm-up period (less
than 8 minutes), the Start key is
red.
After warm-up, the copier goes
3
into Ready condition and the
Start key becomes green.
C
On
Stand
20
STARTING THE COPIER
When The Touch Panel Display Is Off
The copier is in Screen Saver mode.
Stand in front of the auto response sensor to return to the ready condition.
❐ For details about Screen Saver, ☛ see page 1 17.
❐ The following actions will also make the copier ready:
• Opening the document feeder.
• Opening the front cover.
• Touching the to uch pa nel disp lay.
• Pressing any key on the operation panel.
• Setting originals in the document feeder.
• Pressing the Down key of the paper trays.
When The Copier Is Set For User Codes
Input your user code (6 digits)
using the 10 keys. Press the Re-
call/Enter key.
❐ To prevent others from making cop-
ies using your user code, press the
Clear/Stop and Clear Modes key simultaneously after copying.
❐ For detail s about user codes, ☛ see
page 127.
❐ If you input the wrong user code,
press the Clear/Stop key and input
the code again.
BASIC
21
STARTING THE COPIER
When The Copier Has Been Turned Off By The
Weekly Timer
Touch the touch panel display or
1
press any key on the operation
panel.
Enter the access code (4 digits)
2
using the 10 keys.
❐ For detail s about t he weekl y timer, ☛
see page 1 24.
❐ For details about access code, ☛
see page 1 24.
❐ If you enter the wrong number, press
the Clear/Stop key and input the
number again.
❐ The copier is turned off automatically
after a designated time set by Auto
Off. ☛ See page 118.
22
Loading...