Modified Article: Parts Catalog CorrectionPrepared by: S. Hizen
From: QAC 1st Field Information Dept.
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part Standardization
Vendor change
To improve reliability
Other
To meet standards
( )
(No serial number cut-in information)
Please correct your parts catalog as follows.
Page 45
1. Please correct the following part number.
Old partNew partDescriptionIndex
numbernumber
A153 2303Grounding Plate34
A153 2302Drum Bearing Holder34
2. Please add the following part number.
New partDescriptionQtyIndex
number
A153 2301Front Stay135
Page 2
RICOHModification BulletinPAGE: 2/2
Model: Phoenix II (Falcon2)Date: 15-Jul-97
Page 84
Please add the following illustration to your parts catalog.
Page 85
Please add the following part numbers.
No: 1
New partDescriptionQtyIndex
number
A208 8608Operating Instructions - English A4 (RIC)16
A208 8609Operating Instructions - Chinese (RIC)16
Page 3
RICOHModification BulletinPAGE: 1/1
MB Correction
Reissue date: 31-Aug-97
The items with a line drawn through them have been deleted.
Model: Phoenix II (Falcon II)Date: 31-Jul-97
Modified Article: Parts Catalog CorrectionPrepared by: S. Hizen
From: QAC 1st Field Information Dept.
Reason for
Modification:
Please correct your parts catalog as follows.
Page 19
Please change as follows.
Part numberDescriptionQtyIndex
AF02 0330Vertical Driven Roller
AA06 3538
Please add the following parts.
New partDescriptionQtyIndex
number
AA06 3558Spring - 10 mm440
0720 0030ERetaining Ring - M3-106
Busing - 4×5×76 → 4
Parts catalog correction
To facilitate assembly
Part Standardization
Vendor change
To improve reliability
Other
6 → 2
36
37
No: 2
To meet standards
( )
OLDNEW
→→
*
*
*
*
*
***
Page 4
RICOHModification BulletinPAGE: 1/1
*
Model: Phoenix II (Falcon II)Date: 31-Aug-97
Modified Article: Parts Catalog CorrectionPrepared by: S.Hizen
From: QAC 1st Field Information Dept.
Reason for
Modification:
Please add the following part to your parts catalog.
New partDescriptionQtyPageIndex
number
A208 4355 Grounding Brush - Fusing Entrance17917
Parts catalog correction
To facilitate assembly
Part Standardization
Vendor change
To improve reliability
Other
No: 3
To meet standards
( )
Page 5
M
Model:
Phoenix II (Falcon II)
odification
B
Date:
ulletin
31-Aug-97
No:
PAGE: 1/1
4
Modified Article:
From:
Reason for
Modification:
The description of the seal in the development unit is incorre ct. Please correct your Part
Catalog as follows.
The seal has also been changed in size to standardize with other models.
QAC 1st Field Information Dept.
partIncorrect CorrectQtyIntPageIndex Note
numberDescriptionDescription
AA150231Seal – 15x30Seal – 15x32--4120-
Old partNew partDescriptionQtyIntPageIndexNote
numbernumber
AA150231Seal – 15x32
Seal in the Development Unit
Parts catalog correction
To facilitate assembly
Part standardization
Parts catalog correction
To facilitate assembly
Part Standardization
Vendor change
To improve reliability
Other
Toner Bottle Drive
Toner Bottle Drive
Prepared by:
To meet standards
(RIC EU)
(RIC NA)
J. Kasamoto
( )
39*
39*
Page 11
M
Model:
Phoenix II (Falcon II)
odification
B
Date:
ulletin
15-Apr-98
No:
PAGE: 1/3
10
Modified Article:
From:
Reason for
Modification:
The type of bushing used on the transfer belt drive roller has been changed. This is to
prevent the transfer unit casing from cracking as a result of the oil included in the bearing.
QAC Field Information Dept.
Old partNew partDescriptionQtyIntPageIndex Note
numbernumber
0805348508053501Bushing – 8x12x3.52-2X /O47105
Bushing (Transfer Belt Drive Rol ler)
Parts catalog correction
To facilitate assembly
Part standardization
Savin 9032L115/60USA, CanadaA210-15From First Production
Ricoh FT5732115/60USA, CanadaA210-17From First Production
Ricoh FT5732110/60Taiwan, SaudiA210-19From First Production
Gestetner 2732ZT
Gestetner 2732ZTD220/50ChainaA211-62From First Production
Ricoh FT5832220/50ChinaA211-63From First Production
Ricoh FT5832220/50ChinaA211-69A7497890860
115/60USA, Canada,
L. America
220, 230,
240/50
240/50
240/50
240/50,60
Europe, etc.A211-22AL67870001
EuropeA211-263N38770001
EuropeA211-27A7497870001
AsiaA211-39A7497890421
A211-10AK57870001
Page 14
M
Model:
Phoenix II (Falcon II)
odification
B
Date:
ulletin
15-Apr-98
No:
PAGE: 1/3
11
Modified Article:
From:
Reason for
Modification:
The material of the rear guide plate has been changed to prevent the guide from being
worn. If it is worn, paper misfeeds and noise may occur.
QAC Field Information Dept.
Old partNew partDescriptionQtyIntPageIndex Note
numbernumber
A1532560A2042560 Rear Guide Plate1 - 1X/O2319
RearGuide Plate
Parts catalog correction
To facilitate assembly
Part standardization
Savin 9032L115/60USA, CanadaA210-15From First Production
Ricoh FT5732115/60USA, CanadaA210-17From First Production
Ricoh FT5732110/60Taiwan, SaudiA210-19From First Production
Gestetner 2732ZT
Gestetner 2732ZTD220/50ChainaA211-62From First Production
Ricoh FT5832220/50ChinaA211-63From First Production
Ricoh FT5832220/50ChinaA211-69A7497881207
115/60USA, Canada,
L. America
220, 230,
240/50
240/50
240/50
240/50,60
Europe, etc.A211-22AL67870001
EuropeA211-263N38770001
EuropeA211-27A7497870001
AsiaA211-39A7497880502
A211-10AK57870001
Page 17
M
Model:
Phoenix II (Falcon II)
odification
ulletin
B
Date:
15-Apr-98
No:
PAGE: 1/3
12
Modified Article:
From:
Reason for
Modification:
The notch has been extended on the metal plate of the vibrating plate as shown in the
Illustration below to reduce the possibility of the mylar bending.
QAC Field Information Dept.
Old part New part Description Qty Int PageIndexNote
number number
A1544623 A1544626Vibrating Plate 2 - 2 X/O 57 23
Vibrating Plate
Parts catalog correct ion
To facilitate assembly
Part standardization
Savin 9032L115/60USA, CanadaA210-15From First Production
Ricoh FT5732115/60USA, CanadaA210-17From First Production
Ricoh FT5732110/60Taiwan, SaudiA210-19From First Production
Gestetner 2732ZT
Gestetner 2732ZTD220/50ChainaA211-62From First Production
Ricoh FT5832220/50ChinaA211-63From First Production
Ricoh FT5832220/50ChinaA211-69A7497890860
115/60USA, Canada,
L. America
220, 230,
240/50
240/50
240/50
240/50,60
Europe, etc.A211-22AL67900001
EuropeA211-263N39070001
EuropeA211-27A7497900001
AsiaA211-39A7497910837
A211-10AK57900001
Page 20
M
Model:
Phoenix II (Falcon II)
odification
B
Date:
ulletin
30-Apr-98
No:
PAGE: 1/1
13
Modified Article:
From:
Reason for
Modification:
As per field request, the transfer unit has been registered as a service part.
QAC Field Information Dept.
New partDescriptionQtyIntPageIndex
number
A1573850Transfer Unit
Transfer Unit
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
0→1
Prepared by:
-47
M.Kitajima
To meet standards
( )
∗
Page 21
M
Model:
Phoenix II (Falcon II)
odification
B
Date:
ulletin
15-Jun-98
No:
PAGE: 1/1
14
Modified Article:
From:
Reason for
Modification:
Please correct the parts catalog as follows.
QAC Field Information Dept.
Old partNew partDescriptionQtyPageIndex
numbernumber
A153 1637A153 1369Platen Cover Ass’y
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
1 → 1
111
J Kasamoto
( )
Page 22
M
Model:
Phoenix II (Falcon II)
odification
B
Date:
ulletin
30-Jun-98
No:
PAGE: 1/3
15
Modified Article:
From:
Reason for
Modification:
A new model "Amigo (A290)" designed for the Latin American market will be launched in
September 98. Amigo is a minor change product of the already existing model "Falcon 2
basic Model (A208 or RICOH FT5632/Gestetner 2732z)", especially designed to meet the
needs for the Latin American market. There will be two destination codes depending on
the input voltage. -14 is for 120V, and -24 is for 220V area. This MB will explain the
information that should be added to the Falcon 2 (A208/A210/A211) Parts Catalog to
properly service the Amigo (A290) in the field.
Basic Information
1. Universal Paper Tray
QAC Field Information Dept.
• The Upper Tray is equipped with a universal paper tray assembly of the LT version
(A1532950).
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization Other (Release of Amigo)
Vendor change
To improve reliability
Prepared by:
To meet standards
J. Kasamoto
• The Lower Tray is equipped with a NEW universal paper tray assembly (1342949).
2. Toner Supply Unit
• A2043150 (Toner Bottle Drive - RIC EU) is used for all models.
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
M.Kitajima
( )
Problem
If the power is turned on when the front cover is open, the front cover is then closed and
the start key is pressed, SC440 occurs.
Cause
Due to the change to the inner circu it of the main motor to improve the reliability of the
motor, the current software cannot recognize this modified mo tor correctly, resulting in the
SC440 display.
Due to parts standardization with the Swallow II, the timing pulley has been changed.
Since the new timing pulley cannot be supplied separately, assembly parts are provided.
As a result of this change, the Retaining Ring – M4 (Index 102) is no longer used. When
replacing the old timing pulley, make sure to check whether you have the correct part
(front or rear).
Please note that the cut-in serial number is not recorded due to parts standardization.
30
*
29
*
Page 34
RICOHModification
Model:
Phoenix II (Falcon II) (Chinese Version only)
Bulletin
Date:
31-Aug-98
No:
PAGE: 1/3
21
Modified Article:
From:
Reason for
Modification:
The main switch decal for the Chinese version has been changed from an English version
to a Chinese version.
QAC Field Information Dept.
Old partNew partDescriptionQtyIntPageIndex Note
numbernumber
AA001373Decal – Main Switch1-0X/937
AA001373Decal – Main Switch1-0X/852
Decal - Main Switch
Parts catalog correction
To facilitate assembly
Part Standardization
A2041349Decal – Main Switch – Chinese0-1 /0937
A2041349Decal – Main Switch – Chinese0-1 /0852
Model:
Modified Article:
From:
Reason for
Modification:
To reduce no-feed jams from the duplex unit caused by insufficient pressure from the
bottom plate, the shape of the spring clutch has been changed. To distinguish between the
old and new clutches, the colour of the sleeve has been changed from white to blue.
The insufficient pressure occurs when the clutch turns in the direction which tightens the
spring because the sleeve hits the spring hook. As a result, the spring cannot turn
completely, so the bottom plate cannot be lifted up to the highest position.
To prevent the sleeve from hitting the spring hook, 4.5 mm has been cut off the sleeve as
shown.
Phoenix II (Falcon II)
Spring Clutch - Duplex Tray Bottom Plate
QAC Field Information Dept.
Parts catalog correction
To facilitate assembly
Part standardization
The interchangeability code for the Chinese version machine is X/O, and for other versions it is O/O.
n-n+249
***
492
*****
*
28
29
30
31
32
110
****
**
**
To prevent fusing offset on the image caused by paper made in China, an oil supply
system has been added to the fusing unit for the Chinese version machine.
Refer to RTB No.24 for the Phoenix I (Eagle I / Falcon I).
#32 P/N: AE031028
#30 P/N: AE042032
#31 P/N: AE031030
#28 P/N: AE040021
#32 P/N: AE031028
#31 P/N: AE031030
#2 P/N: AE2084053
#110 P/N: 09514006B
#29 P/N: A2084212
Page 47
RICOHModification
Model:
The rib [A] on the fusing upper stay has been deleted. This stay has been used for the
other version machines for part standardization.
To improve the durability of the screw holes for the main reflector, the screw holes have
been changed from the tapping screw type to the pan head screw type. However, the
screws #101 which secure the exposure adjusting plates #8 have not been changed.
QAC Field Information Dept.
Old partNew partDescriptionQtyIntPageIndex Note
numbernumber
A1531774Reflector – Main1-0X/3320
Reflector - Main
Parts catalog correction
To facilitate assembly
Part standardization
To ensure that the fusing antistatic brush contacts the hot and pressure roller shafts, the
following parts have been modified: if contact is poor, static electricity occurs and may
cause SC302, 346, 354, etc.
1. Rear Lamp Terminal Holder
The brush length has been changed from 21 to 23 mm.
i
The thickness of the plate has been changed from 0.5 mm to 1.0 mm.
i
2. Fusing Connector Bracket
iTo make sure that the rear lamp terminal holder fits these parts, a hook has
been added.
Antistatic Brush
Antistatic Brush
Hook
Page 54
RICOHModification
Bulletin
PAGE: 2/3
Model:
MODEL NAMEV/HzDESTINATIONCODESERIAL NUMBER
Gestetner 2732Z