To prevent the vibration caused by the side to side movement of cleaning
blade.
Inter-
1
→ 1
change-
ability
X/O1943 (Eagle) (Ricoh, OEM)
Index No.Page
Parts Catalog
Date of
Modification
To prevent the vibration caused by the side to side movement of cleaning blade, the shape of the cam has been
changed as shown in the illustration. This is also to minimizes a poor contact at the density sensor terminal by the
vibration.
Serial Number
Cam Shape
Cam Shape
Sine wave
S. Hamano, Assistant General Manager
Technical Support Department
The part number A153-5546 for the AC Drive Board listed on the parts catalog is incorrect. The number for the
115V version AC Drive Board is also A153-5545 (AC Drive Board-115V).
Please eliminate the number A153-5546 from your parts catalog.
Ricoh FT5535220/50Asia, Middle East A156-29 A3695030401
220, 230,
240/50
220, 230,
240/50
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EuropeA155-26 3G30350001
EuropeA155-27 A3685030001
USA, Canada,
L. America
Europe, etc.A156-22 866504XXXX
EuropeA156-26 3G20350001
EuropeA156-27 A369504XXXX
JAPAN PRODUCTION
CODE SERIAL NUMBER
A156-10 8675030001
Ricoh FT5135115/60USA, CanadaA155-17 A368504XXXX
Gestetner 2635T
nashuatec 3535T
Rex Rotary
8635LZ
220, 230,
240/50
Europe, etc.A155-22 8645030001
MODIFICATION BULLETIN NO. 9 PAGE 3 OF 3
ISSUED ON: May 15, ’95
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBER
Gestetner 2635
nashuatec 3535
Rex Rotary 8635LZ
Infotec 5351Z220,230, 240/50EuropeA153-26
Ricoh FT5035220,230, 240/50EuropeA153-27
Gestetner 2635t
nashuatec 3535t
Rex Rotary 8635LZ
Infotec 5351ZL220,230, 240/50EuropeA155-26
Ricoh FT5135220,230, 240/50EuropeA155-27
Gestetner 2635td
nashuatec 3535td
Rex Rotary 8635dz
Infotec 5351dz220,230, 240/50EuropeA156-26
Ricoh FT5535220,230, 240/50EuropeA156-27
220,230, 240/50Europe, etc.A153-22
220,230, 240/50Europe, etc.A155-22
220,230, 240/50Europe, etc.A156-22
RPL PRODUCTION
MODIFICATION BULLETIN NO. 10 PAGE 1 OF 3
ISSUED ON: May 31, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleClutch Roller / Paper Feed Roller / Registration Knob
Reason for
Vender Change
Modification
Inter-
Old P/NNew P/NDescriptionQ’ty Used
AA083011AA083009Cluch Roller 8 x 18 x 11
AF031029AF031026Paper Feed Roller
AG050074AG050078Registration Knob
1 → 1
1 → 1
1 → 1
change-
ability
O/O
O/O39
O/O
Date of
Modification
Parts Catalog
Index No.Page
12
21
6
2
25 (A153, A155)
27 (A156)
23
25 (A153, A155)
9
27
Serial Number
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 10 PAGE 2 OF 3
ISSUED ON: May 31, ’95
JAPAN PRODUCTION
MODEL NAMEV/HzDESTINATION
CODE
Gestetner 2635
nashuatec 3535
Savin 9035
Savin 9035115/60USA, CanadaA153-15
Ricoh FT5035115/60USA, CanadaA153-17
Ricoh FT5035110/60Taiwan, SaudiA153-19
Gestetner 2635
nashuatec 3535
Rex Rotary 8635Z
Infotec 5351Z
Ricoh FT5035
Ricoh FT5035220/50Asia, Middle East A153-29
nashuatec 5035110/60TaiwanA153-39
Gestetner 2635110/60TaiwanA153-50
Gestetner 2635T
nashuatec 3535T
Savin 9035L
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
115/60
USA, Canada,
L. America
Europe etc.A153-22
EuropeA153-26
EuropeA153-27
USA, Canada,
L. America
A153-10
A155-10
SERIAL
NUMBER
MODEL NAMEV/HzDESTINATION
CODE SERIAL NUMBER
Infotec 5351ZL
Ricoh FT5135
Gestetner 2635td
nashuatec 3535td
Savin 9035DL
Savin 9035DL115/60USA, CanadaA156-15
Ricoh FT5535115/60USA, CanadaA156-17
Ricoh FT5535110/60Taiwan, SaudiA156-19
Gestetner 2635td
nashuatec 3535td
Rex Rotary8635dz
Infotec 5351DZ
Ricoh FT5535
Ricoh FT5535220/50Asia, Middle East A156-29
220, 230,
240/50
220, 230,
240/50
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EuropeA155-26
EuropeA155-27
USA, Canada,
L. America
Europe, etc.A156-22
EuropeA156-26
EuropeA156-27
A156-10
JAPAN PRODUCTION
Ricoh FT5135115/60USA, CanadaA155-17
Gestetner 2635T
nashuatec 3535T
Rex Rotary
8635LZ
220, 230,
240/50
Europe, etc.A155-22
MODIFICATION BULLETIN NO. 10 PAGE 3 OF 3
ISSUED ON: May 31, ’95
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBER
Gestetner 2635
nashuatec 3535
Rex Rotary 8635LZ
Infotec 5351Z220,230, 240/50EuropeA153-26
Ricoh FT5035220,230, 240/50EuropeA153-27
Gestetner 2635t
nashuatec 3535t
Rex Rotary 8635LZ
Infotec 5351ZL220,230, 240/50EuropeA155-26
Ricoh FT5135220,230, 240/50EuropeA155-27
Gestetner 2635td
nashuatec 3535td
Rex Rotary 8635dz
Infotec 5351dz220,230, 240/50EuropeA156-26
Ricoh FT5535220,230, 240/50EuropeA156-27
220,230, 240/50Europe, etc.A153-22
220,230, 240/50Europe, etc.A155-22
220,230, 240/50Europe, etc.A156-22
RPL PRODUCTION
MODIFICATION BULLETIN NO. 11 PAGE 1 OF 3
ISSUED ON: May 31, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleParts Catalog
Reason for
Parts Catalog Correction
Modification
Date of
Modification
Please correct your parts catalog as follows:
Eagle: Page 21
[Incorrect]
Parts Catalog
P/NDescriptionQ’ty
Index No.PageIndex No.Page
AF031030 Feed Roller1721
[Correct]
P/NDescriptionQ’ty
AF031025
AF031030
Feed Roller (A153)
Feed Roller (A155 / A156)
Parts Catalog
1
1
7
7
21
Note: Two different part numbers exist for the Feed Roller due to that these feed rollers are procu red from two different
venders.
Serial Number
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 11 PAGE 2 OF 3
ISSUED ON: May 31, ’95
JAPAN PRODUCTION
MODEL NAMEV/HzDESTINATION
CODE
Gestetner 2635
nashuatec 3535
Savin 9035
Savin 9035115/60USA, CanadaA153-15
Ricoh FT5035115/60USA, CanadaA153-17
Ricoh FT5035110/60Taiwan, SaudiA153-19
Gestetner 2635
nashuatec 3535
Rex Rotary 8635Z
Infotec 5351Z
Ricoh FT5035
Ricoh FT5035220/50Asia, Middle East A153-29
nashuatec 5035110/60TaiwanA153-39
Gestetner 2635110/60TaiwanA153-50
Gestetner 2635T
nashuatec 3535T
Savin 9035L
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
115/60
USA, Canada,
L. America
Europe etc.A153-22
EuropeA153-26
EuropeA153-27
USA, Canada,
L. America
A153-10
A155-10
SERIAL
NUMBER
MODEL NAMEV/HzDESTINATION
CODE SERIAL NUMBER
Infotec 5351ZL
Ricoh FT5135
Gestetner 2635td
nashuatec 3535td
Savin 9035DL
Savin 9035DL115/60USA, CanadaA156-15
Ricoh FT5535115/60USA, CanadaA156-17
Ricoh FT5535110/60Taiwan, SaudiA156-19
Gestetner 2635td
nashuatec 3535td
Rex Rotary8635dz
Infotec 5351DZ
Ricoh FT5535
Ricoh FT5535220/50Asia, Middle East A156-29
220, 230,
240/50
220, 230,
240/50
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EuropeA155-26
EuropeA155-27
USA, Canada,
L. America
Europe, etc.A156-22
EuropeA156-26
EuropeA156-27
A156-10
JAPAN PRODUCTION
Ricoh FT5135115/60USA, CanadaA155-17
Gestetner 2635T
nashuatec 3535T
Rex Rotary
8635LZ
220, 230,
240/50
Europe, etc.A155-22
MODIFICATION BULLETIN NO. 11 PAGE 3 OF 3
ISSUED ON: May 31, ’95
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBER
Gestetner 2635
nashuatec 3535
Rex Rotary 8635LZ
Infotec 5351Z220,230, 240/50EuropeA153-26
Ricoh FT5035220,230, 240/50EuropeA153-27
Gestetner 2635t
nashuatec 3535t
Rex Rotary 8635LZ
Infotec 5351ZL220,230, 240/50EuropeA155-26
Ricoh FT5135220,230, 240/50EuropeA155-27
Gestetner 2635td
nashuatec 3535td
Rex Rotary 8635dz
Infotec 5351dz220,230, 240/50EuropeA156-26
Ricoh FT5535220,230, 240/50EuropeA156-27
220,230, 240/50Europe, etc.A153-22
220,230, 240/50Europe, etc.A155-22
220,230, 240/50Europe, etc.A156-22
RPL PRODUCTION
MODIFICATION BULLETIN NO. 12 PAGE 1 OF 4
ISSUED ON: May 31, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleDecal - 10 key Zoom etc.
Reason for
Part Number set-up as per field request
Modification
Draw
No.
Old Parts
No.
New Parts
No.
A1531475Decal - 10Key Zoom - LT/DLT
A1531478Decal - 10Key Zoom - A4/A3
A1531476
A1561479
Decal - Margin Adjustment LT/DLT
Decal - Margin Adjustment A4/A3
Description
Rank
Q’ty Used
Old→New
0 → 1
0 → 1
0 → 1
0 → 1
Inter-
change-
ability
Date of
Modification
Parts needed for replacement by new part Parts Catalog
Part No.DescriptionNo.Page
Serial
Number
* 30 (32)
* 7 (8)977
* 30 (32)
* 7 (8)977
* 31 (33)
* 8 (9)977
* 31 (33)
* 8 (9)977
A1561495Decal - Copy Ratio
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
0 → 1
* : New Index
( ) : for OEM P/C
* 32 (34)
* 9 (10)977
MODIFICATION BULLETIN NO. 12 PAGE 2 OF 4
*32 (34)
*30 (32)
*31 (33)
A3 / A4
ISSUED ON: May 31, ’95
LT / DLT
LT / DLTA3 / A4
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 12 PAGE 3 OF 4
ISSUED ON: May 31, ’95
JAPAN PRODUCTION
MODEL NAMEV/HzDESTINATION
CODE
Gestetner 2635
nashuatec 3535
Savin 9035
Savin 9035115/60USA, CanadaA153-15
Ricoh FT5035115/60USA, CanadaA153-17
Ricoh FT5035110/60Taiwan, SaudiA153-19
Gestetner 2635
nashuatec 3535
Rex Rotary 8635Z
Infotec 5351Z
Ricoh FT5035
Ricoh FT5035220/50Asia, Middle East A153-29
nashuatec 5035110/60TaiwanA153-39
Gestetner 2635110/60TaiwanA153-50
Gestetner 2635T
nashuatec 3535T
Savin 9035L
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
115/60
USA, Canada,
L. America
Europe etc.A153-22
EuropeA153-26
EuropeA153-27
USA, Canada,
L. America
A153-10
A155-10
SERIAL
NUMBER
MODEL NAMEV/HzDESTINATION
CODE SERIAL NUMBER
Infotec 5351ZL
Ricoh FT5135
Gestetner 2635td
nashuatec 3535td
Savin 9035DL
Savin 9035DL115/60USA, CanadaA156-15
Ricoh FT5535115/60USA, CanadaA156-17
Ricoh FT5535110/60Taiwan, SaudiA156-19
Gestetner 2635td
nashuatec 3535td
Rex Rotary8635dz
Infotec 5351DZ
Ricoh FT5535
Ricoh FT5535220/50Asia, Middle East A156-29
220, 230,
240/50
220, 230,
240/50
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EuropeA155-26
EuropeA155-27
USA, Canada,
L. America
Europe, etc.A156-22
EuropeA156-26
EuropeA156-27
A156-10
JAPAN PRODUCTION
Ricoh FT5135115/60USA, CanadaA155-17
Gestetner 2635T
nashuatec 3535T
Rex Rotary
8635LZ
220, 230,
240/50
Europe, etc.A155-22
MODIFICATION BULLETIN NO. 12 PAGE 4 OF 4
ISSUED ON: May 31, ’95
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBER
Gestetner 2635
nashuatec 3535
Rex Rotary 8635LZ
Infotec 5351Z220,230, 240/50EuropeA153-26
Ricoh FT5035220,230, 240/50EuropeA153-27
Gestetner 2635t
nashuatec 3535t
Rex Rotary 8635LZ
Infotec 5351ZL220,230, 240/50EuropeA155-26
Ricoh FT5135220,230, 240/50EuropeA155-27
Gestetner 2635td
nashuatec 3535td
Rex Rotary 8635dz
Infotec 5351dz220,230, 240/50EuropeA156-26
Ricoh FT5535220,230, 240/50EuropeA156-27
220,230, 240/50Europe, etc.A153-22
220,230, 240/50Europe, etc.A155-22
220,230, 240/50Europe, etc.A156-22
RPL PRODUCTION
MODIFICATION BULLETIN NO. 13 PAGE 1 OF 4
ISSUED ON: June 15, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleHinge Stopper, etc.
Reason for
To strengthen the hinge stopper and the spring plate of the platen cover.
Modification
Draw
No.
Old Parts
No.
A1531377Hinge Stopper
A1531378Spring Plate
New Parts
No.
A0531957Flex Hinge Platen Cover
DescriptionRank
Q’ty Used
Old→New
2 → 0
2 → 0
0 → 2
Date of
Modification
Inter-
change-
ability
X/O* 1311
Parts needed for replacement by new part
Part No.DescriptionNo.Page
* New Index
Serial Number
Parts Catalog
611
511
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 13 PAGE 2 OF 4
13
ISSUED ON: June 15, ’95
DETAILS OF MODIFICATION
To strengthen the hinge stop per and the spring plat e of the plat en cover, two separated parts have been
combined into one part.
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 14 PAGE 2 OF 4
AA140599
ISSUED ON: June 15, ’95
DETAILS OF MODIFICATION
To eliminate rattling noise from the scanner drive shaft, the shaft ends have bee n mod ifie d from a D-cut
shape to a round shape.
05730040E
05730040E
AB033063
AA140557
AB033063
The Timing pulley - 22Z / 24Z and the hexagon head less set screw h ave been also modified to fit a
shape of the new shafts. These pa rts should be replaced as a set.
The part number set-up for the charge roller terminal assembly to facilitate
part control.
A1532119Charge Roller Terminal Ass’y
0 → 1
Inter-
change-
ability
Charge Roller Terminal
Roller Terminal
# 31 : Charge Roller Terminal
Ass’y A1532119
Date of
Modification
No Serial Number cut-ins
information
Parts Catalog
Index No.Page
3141
Serial Number
NOTE: The Roller Terminal and the Charge Roller
Terminal are still available as service parts.
MODIFICATION BULLETIN NO. 17 PAGE 1 OF 1
ISSUED ON: August 31, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleToner Supply UnitNo serial number cut-in information
Reason for
Part number assigned
Modification
Date of
Modification
The following part numbers have been assigned to the Toner Sup ply Unit s.
Old P/NNew P/NDescriptionQ’ty Used
A153 3150Toner Supply Unit - EU
A153 3151Toner Supply Unit - NA
A153 3153Toner Supply Unit - AA/TWAN/OEM
0 → 1
0 → 1
0 → 1
Inter-
change-
ability
Index No.Page
Parts Catalog
3537
3537
3537
Serial Number
M. Iwasa, Manager
Technical Support Departme nt
MODIFICATION BULLETIN NO. 18 PAGE 1 OF 1
ISSUED ON: August 31, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleParts CatalogNo serial number cut-in information
Reason for
Part Catalog Correction
Modification
Date of
Modification
Please correct your parts catalog as follows:
Incorrect P/NCorrect P/NDescription
Index No.Page
AW50 0012AW50 0010Push Switch571
P/NIncorrect DescriptionCorrect Description
AW23 0008ID SensorToner Density Sensor739
Parts Catalog
Parts Catalog
Index No.Page
Serial Number
A153 5132Density SensorID Sensor2943
M. Iwasa, Manager
Technical Support Departme nt
MODIFICATION BULLETIN NO. 19 PAGE 1 OF 1
ISSUED ON: September 15, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleCleaning BladeNo serial number cut-in information
Reason for
Modification
P/NP/NDescriptionQ’ty Used
A153-2275A153-2277Cleaning Blade
To improve the effectiveness of cleaning when the temperature changes
from high (30°C 90%RH) to low (10°C 15%RH), the blade angle against the
drum has been changed from 15° to 17.5°
1 → 1
Inter-
change-
ability
O/O543
Index No.Page
Date of
Modification
Parts Catalog
Serial Number
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 20 PAGE 1 OF 1
ISSUED ON: October 15, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticlePart CatalogNo serial number cut-in information
Reason for
Part number assigned for the spring wiper of the toner end sensor.
Modification
New P/NDescriptionQ’ty Used
AA06 6246Spring
0 → 1
Index No.Page
2139
Parts Catalog
Date of
Modification
Serial Number
Toner End Senso r
Index 21
Spring
M. Iwasa, Manager
Technical Support Department
: Revised
Re-issued on: December 15, ’95
ISSUED ON: October 15, ’95
MODIFICATION BULLETIN NO. 21 PAGE 1 OF 7
*
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleSee Below
Reason for
To meet the Energy Star requirements, the following parts have been changed.
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
To prevent the left orig inal scale from warping, a metal plate has been added to the new scale .
The scale bracket, which was missing fro m t he part s ca ta log , ha s now be en added . In addition, the P/N has been
changed as a result of the change to the left origin al scale.
Old P/NNew P/NDescriptionQ’ty Used
AC042112AC042113Left Original Scale - A4
AC042116AC042117Left Original Scale - LT
A1531750A1531749Scale Bracket
1 → 1
1 → 1
1 → 1
Inter-
change-
ability
X/X199
X/X X/O as a set199
X/X X/O as a set* 309
Modified ArticleLower Inner CoverNo serial number cut-in information
Reason for
To prevent possible damage to the fusing idler gear.
Modification
Inter-
Old P/NNew P/NDescriptionQ’ty Used
A1531359A1531339Lower Inner Cover
1 → 1
change-
ability
O/O89
Index No.Page
Date of
Modification
Parts Catalog
Serial Number
To prevent possible damage to th e fu sing idle ge ar, as it ma y collide with the lower inner cover when the
fusing unit is slid back into the machine with the exit guide open, the lower inner cove r h as been enla rge d
to reduce the gap betwe en the gear a nd the co ver as sho wn be low.
Lower
Inner
Cover
Gap
70mm → 10mm
Exit Guide
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 27 PAGE 1 OF 1
ISSUED ON: November 15, ’95
M. Iwasa, Manager
Technical Support Department
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleBy-pass Feed TableNo serial number cut-in information
MAIN CONTROL BOARD(A153/A155/ A156/A157/ A159/A160/ A161/A162)
ISSUED ON: November 30, ’95
INDEX
NO.
10014074401 LS I TE6250A1
10114080770 IC- L293D1
10214072496 IC- M 5261L1
10314073708 IC- SLA7026M1
10414081135 IC- X9C104S1
10514080595 IC- NJM2904M1
10614072862 SWITCH1
10714080877 IC- LM339NS1
10814074137 IC- M M1035XF1
10914072187 IC- SN74LS07NS1
11014073257 IC- TC 74HC14A1
11114072862 SWITCH1
11214080595 IC- NJM2904M1
11314072187 IC- SN74LS07NS1
11414072231
11514080874 T RANSI STOR ARRA Y-M 54587F1
11614072231
11714080875 T RANSI STOR ARRA Y-TD623821
11814080629 REGUL ATOR:NJM78M 1:+ 12V1
11914021030 DIODE -1SS2501
12014020708 DIODE -1SS2721
12114020478 DIODE -1SS226TE85L1
12214021037 DIODE -U1ZB 121
12314020688 DIODE1
12415030435 OSCILLATOR AT-51 20MH Z1
12514000369 T RANSI STOR-2SA 1213Y1
12614000558 T RANSI STOR-2SD7801
Part No. Descriptio n
I C - TD 62308AF
I C - TD 62308AF
Assembly
Q'ty per
1
1
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 31 PAGE 1 OF 3
ISSUED ON: November 30, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleFusing Exit Guide
Reason for
To prevent paper jams due to the fusing exit guide peeling off.
Modification
Date of
Modification
The fusing exit guide has be en chan ge d to two fusing exit guides (Front / Rear) to prevent paper jams caused by the
current fusing exit guide peeling off.
To prevent a false SC544 (Fusing Overheat) indication .
Modification
Date of
Modification
Serial Number
The material of the th ermistor bracket has been changed from metal to plastic. This is to prevent an incorrect SC544 indication.
An incorrect indicatio n may occu r if the teflon tape surrounding the thermistor is broken by hit tin g the metal bracket, and the
thermistor circuit is shorted thro ugh the metal bracket.
To prevent the timing belt -S2M300 from coming out of position, the width of th e timin g be lt ha s bee n reduced from 4 mm to 3 mm
and the pulley has been changed to the du al flange type as shown below.
Ricoh FT5535220/50Asia, Middle East A156-29 A3695110336
220, 230,
240/50
220, 230,
240/50
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EuropeA155-26 3G3115XXXX
EuropeA155-27 A368511XXXX
USA, Canada,
L. America
Europe, etc.A156-22 8665100001
EuropeA156-26 3G21050001
EuropeA156-27 A3695110326
JAPAN PRODUCTION
CODE SERIAL NUMBER
A156-10 8675100001
Ricoh FT5135115/60USA, CanadaA155-17 A368511XXXX
Gestetner 2635T
nashuatec 3535T
Rex Rotary
8635LZ
220, 230,
240/50
Europe, etc.A155-22 8645100001
MODIFICATION BULLETIN NO. 35 PAGE 1 OF 2
ISSUED ON: November 30, ’95
ModelPhoenix (Eagle)Volt/Hz
Modified ArticleSee below
Reason for
To prevent the clutch roller from locking.
Modification
Date of
Modification
Serial Number
To prevent the clutch roller AA08-3011 (one-way clutch) from becoming locked during operation, the clutch roller AA08-3011 has
been changed. We are now procurin g a diffe rent type of one-way clutch from a different vender.
The clutches used in parts AF03-1030 , AF03-1029, AG05-0078, and AA08-3012 have also been changed due to the vende r
change of clutch roller AA08-3 011.
To improve the paper separation ability in the fusing unit
Modification
Date of
Modification
Serial Number
To improve the paper separation ability in the fusing unit , the number of hot rolle r stripp ers ha s bee n cha nged from five to
seven. The stripper bracke t an d th e fusing exit frame have also been changed to match the new numb er of strippers as
shown in the illustration.
The numbers of the fu sing unit and the fusin g exit frame have also been chan ge d.
A part number for the Stripper Bracket Ass’y has been assig ned to facilit at e servicing in the fie ld.
Ricoh FT5535220/50Asia, Middle East A156-29 A3695120538
220, 230,
240/50
220, 230,
240/50
115/60
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EuropeA155-26 3G3601XXXX
EuropeA155-27 A368601XXXX
USA, Canada,
L. America
Europe, etc.A156-22 8665120001
EuropeA156-26 3G2016XXXX
EuropeA156-27 A3695120528
JAPAN PRODUCTION
CODE SERIAL NUMBER
A156-10 8675120001
Ricoh FT5135115/60USA, CanadaA155-17 A368601XXXX
Gestetner 2635T
nashuatec 3535T
Rex Rotary
8635LZ
220, 230,
240/50
Europe, etc.A155-22 8645120001
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 42 PAGE 1 OF 1
Reissued on : February 15, ’95
ISSUED ON: January 15, ’96
ModelPhoenix (Eagle)Volt/Hz
Modified Article
Reason for
Modification
A156 4600Duplex Tray Ass’y
A156 4605
*
Parts Catalog
A part number has been assigned for the duplex tray ass’y.
New P/NDescriptionQ’ty Used
0 → 1
Duplex Tray Ass’y
0 → 1
Duplex Tray Ass’y
Date of
Modification
No serial number cut-in information
Parts Catalog
Index No.PageCode
*51-22, -26, -27
*51
-10, -15, -17, -19, -29
Serial Number
MODIFICATION BULLETIN NO. 43 PAGE 1 OF 1
ISSUED ON: January 31, ’96
ModelPhoenix (Eagle)Volt/Hz
Modified Article
Reason for
Modification
Parts Catalog
Parts Catalog Correction
Date of
Modification
No serial number cut-in information
The part number for the Fron t Sid e Pla te is incorrect. Please correct the part number as follows:
Incorrect P/NCorrect P/NDescriptionQ’ty Used
A155 6111A155 6110Front Side Plate
1 → 1
Index No.Page
Parts Catalog
2919
The part number for the Scanner Home Sen sor is missing. Plea se ad d the part nu mbe r to you r pa rt s cata log :
P/NDescription
Index No.Page
A153 1981Scanner Home Sensor Bracket2833
Parts Catalog
Serial Number
# 28
M. Iwasa, Manager
Technical Support Department
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 44 PAGE 1 OF 2
ISSUED ON: January 31, ’96
ModelPhoenix (Eagle)Volt/Hz
Modified Article
Reason for
Modification
Old P/NNew P/NDescriptionQ’ty Used
Toner End Sensor Cover
To prevent the toner end sensor from being damaged by hitting the toner
bottle unit when the development unit is removed / installed, a sensor cover
has been added to the toner end sensor on the toner hopper.
A153 3227Toner End Sensor Cover
0452 3010B
Tapping Bind Screw - M3 x 10
0 → 1
0 → 1
Inter-
change-
ability
Toner Hopper
Date of
Modification
Parts Catalog
Index No.Page
2239
10639
Serial Number
# 106
Toner End Sensor
# 22 Toner End Sensor Cover
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.