Ricoh df67 Modification Bulletin
RICOH Modification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Please correct your parts catalog for DF67.
NAD 30S/30/40 DF67
Parts catalog correction
GTS and S Field Information Dept.
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A6804321 A6804331 Exit Tray 1 - 5 13
A6804331 A6804321 Exit Tray Holder 1 - 3 15
New part
number
Description Qty Int Page Index Note
Date:
Vendor change
To improve reliability
Other
31-Oct98
Prepared by:
No.:
E. Fukuyama
To meet standards
( )
1
RICOH Modification
Model:
NAD 30S/30/40 DF67
Bulletin
Date:
31-Oct-98
No:
PAGE: 1/1
2
Modified Article:
From:
Reason for
Modification:
Please correct your ADF parts catalog as follows.
GTS and S Field Information Dept.
Part Old New Page Old New
number Description Description Index Index
A6804331 Exit Tray Holder Exit Tray 5 15 13
A6804321 Exit Tray Exit Tray Holder 5 13 15
Exit Tray
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
M.Tsuyuki
( )
1. EXTERIOR (A680)
MODEL NAME V/H
DF67 115/60,220/50 All (Ricoh) A680-17 DF67 115/60,220/50 All (NRG) A680-22 DF67 115/60,220/50 All (Infotec) A680-26 DF67 115/60,220/50 All (Lanier) A680-55 DF67 115/60,220/50 All (Ricoh) A680-57 DF67 115/60,220/50 All (NRG) A680-62 -
Z
DESTINATION CODE SERIAL NUMBER
M
odification
B
ulletin
PAGE: 1/1
Model:
NAD 30S/30/40 DF67
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Drive Gears
Parts catalog correction
To facilitate assembly
Part standardization
Date:
15-Feb-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA680003
E. Fukuyama
To meet standards
( )
SYMPTOM
Original feed jam: The original is jammed just after the front edge is fed about 10 cm
(A4/LT size) onto the exposure glass.
POSSIBLE CAUSE
The friction between the Gear-16Z and its shaft increases and exceeds the maximum
torque of the feed motor. This is due to tiny burrs on the shaft.
Countermeasure
The inside diameter of the gears has been changed.
Old part
number
A6802152 A6802154 Gear - 16Z 1 X/O 17 16
A6802151 A6802153 Gear - 16Z 1 X/O 17 18
A6802141 A6802142 Gear - 16Z 1 X/O 17 19
MODEL NAME V/Hz DESTINATION CODE SERIAL NUMBER
DF67 115/60 All (SAVIN) A680-15 1B38870001
DF67 115/60, 220/50 All (Infotec) A680-26 3Q78700 01
DF67 115/60, 220/50 All (Ricoh) A680-57 A7718870228
DF67 115/60, 220/ 50 All (NRG) A680-62 AS08870001
New part
number
Description Q’ty Int Page Index
Loading...