RICOH Modification Bulletin PAGE: 1/2
Model: DF64 Date: 15-Jul-97
No: 1
Modified Article: Parts Catalog Correction Prepared by: S.Hizen
From: QAC 1st Field Information Dept.
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
To meet standards
( )
(No serial number cut-in information)
Page 9
Old part New part Description Qty Int Index Note
number number
A548-1432 Belt Drive Roller 1 1
A548-2141 Timing Pulley - 20Z 1 13
A680-1431 Belt Drive Roller Ass’y 1 X/O 1
The individual part numbers for the belt drive roller and the 20Z timing pulley are listed in
the parts catalog, but the roller shaft is actually press-fit into the pulley on the production
line.
The 20Z pulley cannot be installed on the roller shaft in the field. A part number for the belt
drive roller assembly has been assigned instead of separate numbers for the belt drive
roller and the timing pulley.
Belt Drive Roller
A548 - 1432
(No longer available as a service part)
Pulley - 20Z
A548 - 2141
(No longer available as a service part)
Belt Drive Roller Ass’y
A680 - 1431
RICOH Modification Bulletin PAGE: 2/2
Model: DF64 Date: 15-Jul-97
Page 12
The index number was missing in the following illustration.
Please add the missing number as shown below.
New part Description Qty Page Index
number
A548 5230 Indicator Harness 1 12 32
No: 1
M
Model:
DF64
odification
B
Date:
ulletin
15-Sep-97
No:
PAGE: 1/1
2
Modified Article:
From:
Reason for
Modification:
Please add the following part to your parts catalog.
QAC 1st Field Information Dept.
New part Description Qty Page Index
number
1107 0750 Fuse - 3.15A 250V 1 13 40
Parts Catalog Correction
Parts catalog correction
To facilitate assembly
Part Standardization
Vendor change
To improve reliability
Other
Prepared by:
J.Kasamoto
To meet standards
( )