MODIFICATION BULLETIN NO. 20 Page 1 of 3ISSUED ON: Oct. 31, 90
Model
Modified ArticleLeft Hinge
Reason for
Modification
Draw
No.
Old Parts
No.
A4651394A4651393Left Hinge1 -- 1 x/o47
ARDF for M210, NC11, and N220
(Ricoh DF54, Savin 7150 ARDF, Nashua F811, infotec ARDF IV)
To ensure the DF up and down operation
New Parts
No.
Description
Volt/Hz
A.B.C. Q’ty Used
Old →
RankPart No.DescriptionIndex No. Page
New
Inter-
change-
ability
Part needed for replacement by new partParts Catalog
Date of
Modification
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 20 Page 2 of 3ISSUED ON: Oct. 31, 90
DETAILS OF MODIFICATION
When the operator opens the DF, it may open too
fast after it reaches approximately 30 degrees as
shown in the illustration.
To prevent this, tension of the springs in the DF left
hinge has been changed. The new left hinge will
not let the DF open too fast even after it reaches
approximately 60 degrees.
ADF
60°
30°
Copier
T.Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 20 Page 3 of 3ISSUED ON: Oct. 31, 90
MODIFICATION BULLETIN NO. 21 Page 1 of 2ISSUED ON: Oct. 31, ’90
Model
Modified ArticleFront Frame and DF Upper Cover
Reason for
Modification
ARDF for M210, NC11, and N220
(Ricoh DF54, Savin 7150 ARDF, Nashua F811, infotec ARDF IV)
Parts standardization with ARDF for N230
Due to parts standardization with the ARDF for the N230, the front frame and the DF upper cover have been changed with
the interchangeability code O/O.
MODIFICATION BULLETIN NO. 23 Page 1 of 3ISSUED ON: Novmber 30, ’91
Model
Modified ArticleMain board, feed-in motor and caution decal - fuse
Reason for
Modification
ARDF for M210, NC11, and N220
(Ricoh DF54, Savin 7150, Nashua F811, Infotec ARDF IV)
Vendor change and to meet the UL standards
Volt/Hz
Date of
Modification
Serial Number
The feed-in motor is now procu red from the new vendor and the part numbe r h as been chan ge d. To meet the UL standards for th e
new motor, the fuse spe cifica tion printed on the main board has be en chan ged from "FU101 3A" to "FU101 F3A/1 25V, and a caution
decal has been added to the inside of the DF upper cover. The old and new parts’ interchangeability is O/O, exce pt in the U. S. A.
Old P/NNew P/NDescriptionQ’tyInterchangeabilityPageIndex
A4655190A4655175DF Main Board
A4225300AX060043Feed-in Motor
---AA000072Caution Decal - Fuse
1→1
1→1
0→1
O/O79
O/O583
—5*202
Note: The old motor (A4225300) is still used on other models.
* 202 : New Index Number
DETAILS OF MODIFICATION
Reissued on: September 30, ’92
Reissued on: January 31, ’92
MODIFICATION BULLETIN NO. 23 Page 2 of 3ISSUED ON: Novmber 30, ’91
CAUTION
For continued
protection against risk
of fire, replace only with same type
and rating of fuse.
* 202
23
T. Ito, Manager
Copier Technical Support
Reissued on: September 30, ’92
Reissued on: January 31, ’92
MODIFICATION BULLETIN NO. 23 Page 3 of 3ISSUED ON: Novmber 30, ’91