Ricoh D6510, D5520, D8600 User Manual
Read This First
Read This First
English
Bitte zuerst lesen
À lire avant de commencer
Leer antes de empezar
Leia isto primeiro
Deutsch
Français
Español
Português (Brasil)
English
Read This First
Safety Information for this Machine
Information for This Machine
Installing the Machine (Installed by a
Contractor)
Component Names and Functions
Connection
For information not in the printed manual,
refer to the HTML/PDF files on the website.
Read this manual carefully before you use this machine and keep
it handy for future reference. For safe and correct use, be sure to
read the Safety Information in this manual before using the
machine.
English
TABLE OF CONTENTS
Disclaimer............................................................................................................................................................3
About Operating Instructions.............................................................................................................................4
1. Safety Information for this Machine
Safety Symbols for This Machine...................................................................................................................... 5
Safety Information...............................................................................................................................................6
Safety During Operation............................................................................................................................... 6
Safety Precautions to Be Followed................................................................................................................6
Safety Labels of This Machine.........................................................................................................................10
Positions of WARNING and CAUTION labels.........................................................................................10
Symbols for Earth and Power Switch......................................................................................................... 10
Important Safety Instructions........................................................................................................................... 11
Notes on the LCD Panel of the Machine........................................................................................................12
2. Information for This Machine
Laws and Regulations...................................................................................................................................... 13
Warning on Class A Product...................................................................................................................... 13
CE Marking Traceability Information (For EU Countries Only)............................................................... 13
User Information for Wireless Network (For EU Countries Only)............................................................13
Overseas Affiliates and Noise Emission Information................................................................................ 14
User Information on Electrical and Electronic Equipment.........................................................................14
Note for the Battery and/or Accumulator Symbol (For EU countries only)............................................15
Notes to USA Users of FCC Requirements................................................................................................ 15
Notes to users in the United States of America..........................................................................................16
Notes to Canadian Users of Wireless Devices......................................................................................... 16
Notes to Users in the State of California (Notes to Users in USA)...........................................................17
Notes for Contractors (in Norway)............................................................................................................ 17
3. Installing the Machine (Installed by a Contractor)
Installing the Machine (Installed by a Contractor)........................................................................................19
Installation Precautions.................................................................................................................................... 20
Wall Mounting Precautions........................................................................................................................ 20
Environmental Specifications...........................................................................................................................22
Installation Space Requirements..................................................................................................................... 23
When Installing the Machine by Mounting the Main Unit on a Wall.....................................................23
Mounting the Pen Tray.....................................................................................................................................25
1
4. Component Names and Functions
Input/Output Terminals................................................................................................................................... 27
5. Connection
Connecting the Touch Module........................................................................................................................29
Connecting the Bluetooth Adapter................................................................................................................. 30
Connecting Power............................................................................................................................................31
2
Disclaimer
To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any
damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or
non-use of this product and operation manuals provided with it.
Make sure that you always copy or have backups of the data registered in this machine. Documents or
data might be erased due to your operational errors or malfunctions of the machine.
3
About Operating Instructions
Operating Instructions explains how to operate and troubleshoot the machine after it is set up. It also
lists the detailed specifications of the machine. You can download Operating Instructions from the
RICOH home page.
http://www.ricoh.com/
4
1. Safety Information for this Machine
This chapter describes the safety precautions.
Safety Symbols for This Machine
The meanings of the safety symbols for this machine are as follows:
Caution
Prohibition
No disassembly
Caution, risk of electric shock
Refer to instruction manual (Please
refer to page 8 "Battery safety
notice" of Read This First)
5
1. Safety Information for this Machine
Safety Information
Safety During Operation
In this manual, the following important symbols are used:
Indicates a potentially hazardous situation which, if instructions are not followed, could result in death
or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor
or moderate injury or damage to property.
Safety Precautions to Be Followed
This section explains safety precautions that should always be followed when using this machine.
• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy
disconnection of the power cord in the event of an emergency.
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Since there are openings on the
top and side surfaces of this machine, fire or electric shock could result if liquids or foreign
substances get into the machine.
• The supplied power cord is for use with this machine only. Do not use it with other appliances.
Doing so could result in fire or electric shock.
• Do not place the machine near water, like a spa or pool, or in a position which will allow the
splashing or spraying of water onto the display, like in front of an open window where rain
water may enter. Fire or electric shock could result from spillage or if such objects or substances
fall inside this machine.
• Use only genuine accessories or accessories recommended by the manufacturer to mount the
main unit. Using wrong or unsuitable accessories may cause the main unit to fall and result in
serious personal injuries. Make sure that the surface and fixing points are strong enough to
sustain the weight of the main unit.
6
Safety Information
• To reduce the risk of electric shock, do not remove covers. No user serviceable parts inside.
Refer all servicing to qualified service personnel.
• Only mount the display that is supported by this stand. If you attempt to use another display
with this stand, the display might fall off the stand, become damaged, or tip over. For
information about the supported models, see the RICOH web site (http://www.ricoh.com/).
• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine away from babies
and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.
• If metal objects, or water or other fluids fall inside this machine, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• Be sure to disconnect the plug from the wall outlet at least once a year and check for the
following:
• There are burn marks on the plug.
• The prongs on the plug are deformed.
• If any of the above conditions exist, do not use the plug and consult your dealer or service
representative. Use of the plug could result in fire or electric shock.
• Be sure to disconnect the power cord from the wall outlet at least once a year and check for the
following:
• The power cord's inner wires are exposed, broken, etc.
• The power cord's coating has a crack or dent.
• When bending the power cord, the power turns off and on.
• Part of the power cord becomes hot.
• The power cord is damaged.
• If any of the above conditions exist, do not use the power cord and consult your dealer or
service representative. Use of the power cord could result in fire or electric shock.
7
1. Safety Information for this Machine
• Do not place the machine on an uneven, sloping or unstable surface (such as a trolley) where it
may fall and cause damage to itself or others.
• When assembling the stand, mounting the main unit on a wall, or installing the main unit, make
sure to contact your local dealer. Do not attempt to perform the installation by yourself.
• Do not install the machine in a confined space without proper ventilation and air circulation,
such as in a closed cabinet. Allow proper space around the machine for dissipating heat
inside. Do not block any openings and vents on the machine. Overheating may result in
hazards and electric shock.
• To prevent personal injuries, mounting the main unit or installing the stand is required before
use.
• Avoid placing the display in direct sun or where direct sun or spot lighting will shine onto the
LCD panel, as the heat may damage the panel and the external casing of the display, and the
bright light will make viewing the display more difficult than necessary.
• Do not obstruct the machine's air inlet or outlet. Doing so risks fire caused by overheated
internal components or resulting in damage to the product.
• Do not allow foreign objects to enter the machine from the air inlet or outlet.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around
the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
Safety notice for remote control
• Do not expose the remote control to water or moisture. Failure to do so could result in
malfunction.
Battery safety notice
• Always ensure that the batteries are inserted with the positive and negative terminals in the
correct direction as shown in the battery compartment.
8
Safety Information
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life or
cause chemical leaks from the old batteries.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out
of the batteries, wipe it up immediately using a dry cloth, and replace the batteries as soon as
possible.
• Different types of batteries have different characteristics. Do not mix different types.
• There is a risk of explosion if a battery is replaced with an incorrect type of battery. Dispose of
used batteries according to the instructions.
Handling the machine's interior
This section explains safety precautions about handling the machine's interior.
• Do not remove any covers or screws that are not mentioned in this manual. Contact your
service representative if any of the product's internal components require maintenance,
adjustment, or repair.
• Do not disassemble or modify the product. Doing so may cause injury or malfunction.
• If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can
result from heavy accumulation of dust inside this machine. Contact your sales or service
representative for details about and charges for cleaning the machine's interior.
9
1. Safety Information for this Machine
Safety Labels of This Machine
This section explains the machine's safety information labels.
Positions of WARNING and CAUTION labels
This machine has labels for WARNING and CAUTION. For safety, please follow the instructions
and handle the machine as indicated.
Symbols for Earth and Power Switch
Symbols for earth and power switch that are used for this machine are as follows:
• : Earth
• : STANDBY
10
Important Safety Instructions
Important Safety Instructions
1. Read this manual carefully.
2. Keep this manual handy for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the stand or bracket specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
11
1. Safety Information for this Machine
Notes on the LCD Panel of the Machine
• The Liquid Crystal Display (LCD) panel of this display has a very thin protective layer of glass which
is liable to marking or scratching, and cracking if struck or pressured. The liquid crystal substrate is
also liable to damage under excessive force or extreme temperatures. Please handle with care.
• The response time and brightness of the LCD panel may vary with the ambient temperature.
• The LCD panel consists of individual pixels to display images and is manufactured according to the
design specifications. While 99.99% of these pixels work normally, 0.01% of the pixels may
remain constantly lit (in red, blue or green) or unlit. This is a technical limitation of the LCD
technology and is not a defect.
• LCD screens, like plasma (PDP) and conventional CRT (Cathode Ray Tube) screens, are also
susceptible to 'screen burn-in' or 'image retention' which can be found on the screen as visible fixed
lines and shades. To avoid such damage to the screen, avoid displaying still images (like OnScreen Display menus, TV station logos, fixed/inactive text or icons) for more than two hours.
Change the aspect ratio from time to time. Fill the entire screen with the image and eliminate the
black bars whenever possible. Avoid displaying images in 4:3 aspect ratio over a long period of
time, otherwise there may be visible burn marks on the screen as two vertical lines.
12
2. Information for This Machine
This chapter describes laws and regulations related to this machine.
Laws and Regulations
Warning on Class A Product
Warning:
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
As this machine is not a household appliance, it does not conform to ErP Directive 2009/125/EC
which was revised in 2013.
CE Marking Traceability Information (For EU Countries Only)
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan
Importer:
Ricoh Europe PLC
20 Triton Street, London. NW1 3BF, United Kingdom
User Information for Wireless Network (For EU Countries Only)
Declaration of Conformity
Notice to Users in EEA Countries
This product complies with the essential requirements and provisions of Directive 2014/53/EU.
The CE Declaration of Conformity is available by accessing the URL: http://www.ricoh.co.jp/fax/
ce_doc/
and selecting the product applicable.
13
2. Information for This Machine
Overseas Affiliates and Noise Emission Information
In accordance with TUV “GS Symbol” requirements, details of the EU office or representative
company are given below.
Overseas Affiliates
Ricoh Europe PLC
20 Triton Street, London. NW1 3BF, United Kingdom
Noise Emission
Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779
User Information on Electrical and Electronic Equipment
Users in the countries where this symbol shown in this section has been specified in national law on collection and treatment of E-waste
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
The symbol indicates that the product must not be treated as municipal waste. It must be disposed of
separately via the appropriate return and collection systems available. By following these instructions
you ensure that this product is treated correctly and help to reduce potential impacts on the environment
and human health, which could otherwise result from inappropriate handling. Recycling of products
helps to conserve natural resources and protect the environment.
For more detailed information on collection and recycling systems for this product, please contact the
shop where you purchased it, your local dealer or sales/service representatives.
All Other Users
If you wish to discard this product, please contact your local authorities, the shop where you bought this
product, your local dealer or sales/service representatives.
14
Laws and Regulations
For Users in India
This product including components, consumables, parts and spares complies with the "India E-waste
Rule" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for
cadmium, except for the exemptions set in the Rule.
For Turkey only
Note for the Battery and/or Accumulator Symbol (For EU countries only)
In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II,
the above symbol is printed on batteries and accumulators.
This symbol means that in the European Union, used batteries and accumulators should be disposed of
separately from your household waste.
In the EU, there are separate collection systems for not only used electrical and electronic products but
also batteries and accumulators.
Please dispose of them correctly at your local community waste collection/recycling centre.
Notes to USA Users of FCC Requirements
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
15
2. Information for This Machine
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Using the shield cable
Properly shielded and grounded cables and connectors must be used for connections to a host computer
(and/or peripheral) in order to meet FCC emission limits.
Installing the ferrite core
Ferrite core must be used for RF interference suppression.
Notes to users in the United States of America
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Notes to Canadian Users of Wireless Devices
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
16
Laws and Regulations
Notes to Users in the State of California (Notes to Users in USA)
Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate
Notes for Contractors (in Norway)
D6510 and D5520 are designed for an IT power system with phase-to-phase voltage 230V.
17
2. Information for This Machine
18
3. Installing the Machine (Installed by a Contractor)
Installing the Machine (Installed by a Contractor)
• When mounting the main unit on a wall, or installing the main unit, make sure to contact your
local dealer. Do not attempt to perform the installation by yourself.
The main unit can be mounted on the dedicated stand or mounted on a wall. For details about how to
mount the main unit on the dedicated stand, see Installation Guide included with the dedicated stand.
For details about how to mount the main unit on the wall, see the instructions included with the wallmounting bracket.
Contact your local dealer for details about recommended stands other than the dedicated stand.
• When you use RICOH Interactive Whiteboard D6510
When using a stand other than a recommended stand or the dedicated stand, be sure it has a load
capacity of 60 kg (132.3 lb.) or more.
• When you use RICOH Interactive Whiteboard D5520
When using a stand other than a recommended stand or the dedicated stand, be sure it has a load
capacity of 50 kg (110.3 lb.) or more.
19
3. Installing the Machine (Installed by a Contractor)
Installation Precautions
• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these
items in the vicinity of this machine. Doing so could result in fire or electric shock.
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Since there are openings on the
top and side surfaces of this machine, fire or electric shock could result if liquids or foreign
substances get into the machine.
• Install the machine so that the power cord and cables do not get tangled or caught. If the
cables get caught, they may become damaged, resulting in fire or electric shock.
• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine away from babies
and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might
occur.
• Do not place any objects on the machine. Doing so may cause the machine to topple over,
possibly resulting in injury.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might
occur.
• Keep the machine away from salt-bearing air and corrosive gases. Also, do not install the machine
in places where chemical reactions are likely (laboratories, etc.), as doing so will cause the
machine to malfunction.
Wall Mounting Precautions
A VESA-compliant bracket is required to mount the main unit on a wall.
20
Installation Precautions
• At least three people are required to install, remove, or move the main unit.
• When mounting a VESA-compliant bracket, use the bracket that is 400 × 200 mm (15.7 × 7.8
inches) or 400 × 400 mm (15.7 × 15.7 inches).
• Use a bracket that creates 3 cm (1.18 inches) or more of clearance when the main unit is mounted
on a wall or the ceiling.
• The main unit of RICOH Interactive Whiteboard D6510 weighs about 60 kg (132.3 lb.). The main
unit of RICOH Interactive Whiteboard D5520 weighs about 50 kg (110.3 lb.). Use a mounting
bracket that is sufficiently strong enough to support the weight of the main unit.
• When mounting the main unit on a wall or the ceiling, select a location that can withstand four
times the combined weight of the main unit and mounting bracket, such as a concrete wall or pillar.
• When mounting a bracket, use M8 screws.
• Use all the VESA screw holes on the back.
• Screw all holes for mounting.
• Contact your local dealer for details about the recommended wall-mounting bracket for the main
unit.
21
3. Installing the Machine (Installed by a Contractor)
Environmental Specifications
The following table lists the environmental specifications for the machine:
Environment Specifications
Temperature 0-32°C (32-89.6°F)
Humidity 10-80% (without condensation)
Maximum altitude 2,500 m (8,202 feet)
Power AC 100-240 V, 50/60 Hz
• The machine is designed for indoor use.
• The machine is equipped with an infrared touch panel. Do not use the machine in a location
exposed to strong light, such as direct sunlight. If you use the machine in a location exposed to
strong light, the machine may not operate properly.
• We recommend that you take the necessary measures to prevent the machine from falling over
after it is installed.
• If you install the machine in a location exposed to high temperatures, we recommend that you
specify a low humidity (60% or lower) when operating the machine.
• This machine uses an infrared touch panel. Do not put close to this machine any equipment that
uses infrared. Doing so may affect the operation of the equipment.
• If you put RICOH Unified Communication System P3500 on the shelf board of the stand,
place the front of the light receiver of the remote control toward you, setting the machine on
the front end of the shelf board.
22
1
2
3
4
Installation Space Requirements
Installation Space Requirements
Secure a sufficient amount of clearance around the machine to allow for cable routing and better
airflow.
• When using multiple machines in close proximity, the touch pens may not operatecorrectly. In such
cases, either place some distance between the machines or arrange them so they are parallel to
each other.
When Installing the Machine by Mounting the Main Unit on a Wall
1. Left: 10 cm (3.9 inches) or more
2. Top: 20 cm (7.9 inches) or more
3. Right: 15 cm (5.9 inches) or more
4. Under: 20 cm (7.9 inches) or more
• To maintain proper ventilation, keep at least 20 mm of clear space from the back cover of the
display to the wall.
23
20 mm
(0.78")
3. Installing the Machine (Installed by a Contractor)
• Please consult a professional technician for wall mount installations. The manufacturer accepts no
liability for installations not performed by a professional technician.
24
Mounting the Pen Tray
Mounting the Pen Tray
• When mounting the pen tray, make sure to contact your local dealer. Do not attempt to perform the
mounting by yourself.
After mounting the main unit, mount the pen tray on the main unit. The pen tray should be positioned on
the center of the lower part of the main unit.
• A Phillips screwdriver is required to mount the pen tray. Select the proper tool according to location
in which the main unit is installed.
• When removing the main unit from the stand or wall, make sure to remove the pen tray first.
25
3. Installing the Machine (Installed by a Contractor)
26
Loading...