Page 1
SORTER
(Machine Code: A322)
Page 2
10 May 1996 SPECIFICATION
1. SPECIFICATION
Paper Size for Bins: Maximum: A3 (lengthwise) or
11" x 17" (lengthwise)
Minimum: A5 (sideways) or
1/2
5
2
Copy Paper Weight: 50 - 90 g/m
or 14 - 24 lb
Number of Bins: 15 bins + interruption bin (total 16 bins)
Bin Capacity: Sort mode: 50 sheets/bin (A4 or 8
Stack mode: 40 sheets/bin (A4 or 8
" x 8
1/2
" (sideways and lengthwise)
1/2
" x 11")
1/2
" x 11")
Top Bin Capacity: 150 sheets (A4 or 8
Print Bin Capacity: 40 sheets/bin (80 g/m
Interrupt Bin Capacity: 100 sheets (A4 or 8
1/2
" x 11")
2
or 20 lb
1/2
" x 11")
Power Source: DC 24V from the copier
Power Consumption: 0.03 kW
Dimensions (W x D x H): 499 x 535 x 600 mm
19.6" x 21.1" x 23.6"
Weight: 22 kg, 48.5 lb
Interface Requirement: A sorter adapter is needed.
Sorter
1
Page 3
MAJOR DIFFERENCES FROM THE A511 10 May 1996
2.MAJOR DIFFERENCES FROM THE A511 (CS210)
The number of bins has been changed. (Requests from the field.)
•
Sorter for This Machine Sorter for Base Copier
15 bins
+ interruption bin
The exterior color has been changed. (New corporate identity color)
•
10 bins
+ interruption bin
+ print bin
2
Page 4
10 May 1996 SORTER (A322)
3. INSTALLATION (LILY)
3.1ACCESSORY CHECK
Check the accessories against the following list:
Description Q’ty
1. Installation Procedure....................................................... 1
2. NECR (-17 only)............................................................... 1
3. Stud.................................................................................. 2
4. Knob Screw...................................................................... 2
5. Sorter Bin..........................................................................15
6. Interrupt Bin...................................................................... 1
7. Grounding Screw.............................................................. 1
Installation
Sorter Adapter
Description Q’ty
1. Fan Motor Assembly......................................................... 1
2. Air Outlet Plate.................................................................. 1
3. Harness Clamp................................................................. 2
4. Relay Harness.................................................................. 1
5. Guide Plate Assembly...................................................... 2
6. Philips Pan Head Screw - M4 x 6..................................... 9
3-37
Page 5
SORTER (A322) 10 May 1996
3.2INSTALLATION PROCEDURE
[A]
[H]
[C]
[B]
NOTE:
[F]
A322I500.wmf
[E]
[F]
[G]
[F]
To install this sorter on the A172/A199 copier, the A527 sorter
adapter kit (option) is necessary.
[D]
A322I501.img
1. Remove four pieces of tape:
Sorter Top Cover [A] (1 pc)
Transport Guide [B] (2 pcs)
Sorter Harness [C] (1pc)
2. Open the top cover [D] and remove the following items:
Tape [E] (1 pc)
Cushion [F] (4 pcs)
Clamp [G] (1 pc) [1 screw]
Cardboard [H] (1 pc)
3-38
Page 6
10 May 1996 SORTER (A32 2)
[A]
[B]
[C]
A322I502.img
Installation
[E]
[D]
A322I503.img
3. Remove the upper rear cover [A] (4 screws).
4. Open the front doors, then remove the left inner cover [B] (1 screw).
5. Remove the upper left cover [C] (4 screws).
6. Remove the 5 caps [D].
7. Remove the portion of the cover [E] with cutting pliers as shown.
8. Reinstall the upper left cover.
3-39
Page 7
SORTER (A322) 10 May 1996
[A]
[B]
[C]
[D]
A322I504.img
[E]
9. Install the studs [A].
10. Install the upper guide plate [B] (2 screws).
11. Install the lower guide plate [C] (2 screws).
12. Remove the sorter top cover [D] (3 screws).
13. Remove the sorter rear cover [E] (4 screws).
14. Remove the sorter front cover (2 screws).
3-40
A322I505.img
Page 8
10 May 1996 SORTER (A32 2)
[A]
[B]
[C]
Installation
A322I506.img
15. Remove the rear cover mounting bracket [A] (1 screw).
16. Install the air outlet plate [B] where the rear cover mounting bracket was
previously installed (1 screw). Use the screw which was used for the rear
cover mounting bracket.
NOTE:
Make sure the air outlet plate hook [C] engages the sorter rear
frame as shown.
3-41
Page 9
SORTER (A322) 10 May 1996
[A]
[B]
[C]
A322I507.wmf
[D]
[E]
[F]
A322I508.wmf
17. Connect the accessory harness connectors [A] to the fan assembly
connectors.
18. Install the fan assembly [B] on the sorter rear frame
(3 screws and 1 connector).
NOTE:
Make sure to run the harness through the cutout [C] as shown.
19. Install the sorter into the mounting holes [D] on the copier while inserting
the sorter harnesses [E] through the opening in the left cover (connect the
2 studs of the copier to the sorter).
20. Attach the sorter to the copier with two screws (2 knob screws [F]).
3-42
Page 10
10 May 1996 SORTER (A32 2)
[C]
[A]
[D]
[B]
A322I509.img
Installation
[E]
A322I510.img
21. Remove the protective cover and secure the 4p connector [A].
22. Secure the grounding wire [B]* (1 grounding screw with toothed washer).
NOTE*:
For all models other than those intended for North America, the
green wire is intended as a functional earth and should be
connected as shown.
23. Install two wire clamps [C].
24. Connect the fiber optics connector to CN515 of the main control board.
25. Insert all 15 sorter bins [D].
26. Insert the interrupt bin [E].
27. Install all covers on the copier and the sorter.
28. Check machine operation.
3-43
Loading...