Ricoh CS220 Modification Bulletin
RICOH Modification Bulletin PAGE: 1/1
Model: CS220 (Phoenix Series) Date: 31-Aug-97
Modified Article: Knob Screw Prepared by: S.Hizen
From: QAC 1st Field Information Dept.
Reason for
Modification:
The length of the knob screw has been increased from 12 mm to 14 mm to prevent
vibrations passing from the sorter by making a small gap. If the old knob was firmly
tightened, vibrations from the sorter caused jitter on the trailing edge of the copy (about
10 mm from the bottom).
Old part New part Description Qty Int Page Index Note
number number
A5567101 A5567111 Knob Screw 2 - 2 X/O 5 41
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
No: 1
To meet standards
( )
Start Serial Number : A3827470242
M
Model:
CS220
odification
B
Date:
ulletin
15-Jun-98
No:
PAGE: 1/1
2
Modified Article:
From:
Reason for
Modification:
Please correct the parts catalog as follows.
QAC Field Information Dept.
Old part New part Description Qty Page Index
number number
A556 5305 A556 5300 Interface Harness
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
1 → 1
322
J. Kasamoto
( )
Loading...