Ricoh Caplio Utility for Windows Operation Manual
Caplio Utility
for Windows
Operation Manual
English
To ensure correct use of the product, read this manual
carefully before use. Keep the manual handy for future
use.
Introduction
Thank you for purchasing a Ricoh product.
This manual explains the correct handling procedures and precautions for the product. To ensure
the best performance from the product, please read the manual carefully before using the
product. Keep the manual handy for future reference.
Ricoh Co., Ltd.
Important
• Be sure to make a backup copy of important data. Data may be lost in the event of misoperation by the
user or malfunction of the product.
• Ricoh Co., Ltd. assumes no liability for data created by the user using this product.
• Ricoh Co., Ltd. assumes no liability for damages caused by failure of the product, damages incurred due
to loss of text or data, or any other damages arising from use of the product.
Copyright
Reproduction or alteration of copyrighted documents, magazines, music and other materials, other than for
personal, home or similarly limited purposes, without the consent of the copyright holder is prohibited.
• This publication may not be reproduced in whole or part without the express written permission of Ricoh.
© 2001 Ricoh Co., Ltd.
• Ricoh reserves the right to change the contents of this publication without notice.
• Considerable care was taken in preparing this manual. If, however, you have any questions about any part
of the manual, or note any mistakes or inaccuracies, please contact us at the address listed on the back
cover.
Microsoft, MS and Windows are registered trademarks of Microsoft Corporation in the United States and
other countries.
QuickTime is a trademark of Apple Computer, Inc. registered in the United States and other countries.
All other company and product names are registered trademarks and/or trademarks of their respective
owners.
What You Can Do Using This Software
Download images, Sound file and motion pictures and transfer files to the
camera
By connecting the camera to a PC, you can download recorded images, Sound file and motion
pictures onto the PC, and you can also transfer images, Sound file (WAV files) and motion
picture files (AVI files) stored in the PC to the camera.
1
Contents
What You Can Do Using This Software........................................................1
Chapter 1 Preparing the Software.................................................... 3
Explanation of Software ................................................................................3
System Environment .....................................................................................5
Installing the Software...................................................................................6
Uninstalling the Software ............................................................................10
Chapter 2 Connecting the Camera to a PC.................................... 13
Connecting the Camera to a PC using the USB Cable ..............................13
Disconnecting the USB Cable....................................................................14
Chapter 3 Using Caplio Utility ........................................................ 15
Starting and Exiting Caplio Utility ...............................................................15
Starting Caplio Utility............................................................................................... 15
Exiting Caplio Utility ................................................................................................ 16
Functions of the Caplio Utility buttons ........................................................16
Saving Files in the Camera on the PC ........................................................17
Saving from the camera using the [Save from Camera] button ............................. 17
Transferring Files From the PC to the Camera ...........................................19
Transfer using the [Save to Camera] button ........................................................... 19
Other Functions (Camera Property)............................................................21
Name of the photographer (Camera Property) ....................................................... 21
Entry Memo ............................................................................................................. 22
Chapter 4 Troubleshooting ............................................................. 23
When the Camera Does Not Work Correctly ..............................................23
COM Port Settings for Windows 98/Me ......................................................24
Reinstalling Caplio RR1 Software (USB Driver)..........................................25
Restoring the device when recognized as an unknown device ............................. 25
2
Chapter
1
Preparing the Software
1
This chapter explains the preparations required to use the supplied software, such as the
necessary system environment, installation of Caplio Utility, etc.
Explanation of Software
The following initial screen is displayed when the CD-ROM is loaded.
Preparing the Software
Caplio RR1 Software
■
To install the software listed below, click on [ Caplio RR1 Software] on the initial
screen.
Software Description
Caplio Utility
USB Driver
TWAIN Driver
This software enables you to save files recorded with the camera in
the PC, or transfer files stored in the PC to the camera.
This software is required for using Caplio Utility and TWAIN Driver
when the camera is connected to the PC by the USB interface.
This software is for downloading still images recorded with the
camera directly from the TWAIN application.
3
■
Browse CD-ROM
Click on [ Browse CD-ROM] on the initial screen to display the folders contained in the
CD-ROM. To install the software, click on the installer in the appropriate folder.
Software Description
QuickTime Folder
QuickTime 4 (Be
sure to install this
software)
MGI Folder
MGI PhotoSuite This software is a well-rounded photo editing package that delivers
Note
• For further details, refer to the Readme or PDF file for the software.
This software is required to view motion pictures recorded with the
camera.
extensive multimedia file playback and online imaging service
support.
4
System Environment
The following system environment is required to use Caplio Utility.
Operating system
Windows 98/98SE
Windows Me
Windows 2000
1
Preparing the Software
PC
CPU
Memory
Available HD space for
installation
Display resolution
Display colors
CD-ROM drive
USB port
Sound
Note
PC on which the above operating system is pre-installed and
which is equipped with a USB port whose operation is
guaranteed by the PC manufacturer
Pentium or later
Windows 98/98SE: 32 MB or more (96 MB recommended)
Windows Me: 64 MB or more (96 MB recommended)
Windows 2000: 128 MB or more (256 MB recommended)
Windows 98/98SE: 10 MB or more
Windows Me: 10 MB or more
Windows 2000: 10 MB or more
640 × 480 dots or more (800 × 600 dots or more recommended)
256 or more (65000 or more recommended)
CD-ROM drive compatible with the above PC
USB port compatible with the above PC
Sound blaster compatible with the above operating system, or
interchangeable sound card and speakers
• You can display images with 256 colors, but reproduction is greatly improved with 65,000
colors. You are therefore recommended to use 65,000 colors or more if possible.
5
Installing the Software
This section explains how to install the necessary software, such as Caplio Utility, USB
Driver for connecting the camera to a PC, and QuickTime.
Exit all other applications before following the procedures below to install the software.
Note
• If you start up Windows and connect the camera to the PC before installing the software, the
[Add New Hardware Wizard] screen will be displayed. If this happens, click on [Cancel] and
proceed to install the software after Windows is up and running.
• This section explains the installation procedure by the standard installation method. Users who
are familiar with PCs and digital cameras may choose to specify the software they wish to install.
• For Windows 2000, users with administrator rights should login first before installing the
software.
1
Turn the PC on and start up Windows.
2
Insert the CD-ROM supplied with the camera in the CDROM drive. The initial CD-ROM screen will be displayed.
Select [Caplio RR1 Software].
3
The installer will start up and the language selection screen will be displayed
after a short time.
6
4
Select [OK] .
Select [Next].
5
1
Preparing the Software
Confirm the destination and select [Next].
6
To install the software in a different folder other than that displayed, select
[Browse...] and choose the destination.
7
Select [Standard] and then select [Next].
[Standard]
Caplio Utility and USB Driver will be installed.
7
Loading...