Ricoh BT21A01 User Manual
*R-BT21A is used for only mobile device which manufactured by Ricoh Company, Ltd, so there is
only manual requirement statement as a User Manual.
Note to users in the United States of America
Notice:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receive
Connect the equipment into an outlet on a circuit different from that to which
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
r.
the
Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Declaration of Conformity
Product Name: Option(s) for Radiocommunications
Model Number: R-BT21A
Responsible party: Ricoh Americas Corporation
Address: 5 Dedrick Place, West Caldwell, NJ 07006
Telephone number: 973-882-2000
This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Note to users in Canada
Note:
This Class B digital apparatus complies with Canadian ICES-003.
Remarque concernant les utilisateurs au Canada Avertissement:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Note to users
It is strictly forbidden to use antenna except designated.
This equipment must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules.
This equipment should be installed and operated with at least 20cm more between
the radiator and person's body(excluding extremities:hands, wrists, feet and ankles).
Note to users in Canada
This device complies with RSS-Gen of IC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Remarque concermant les utilisateurs au Canada
Ce dispositif est conforme à la norme CNR-Gen d’Industrie Canada.
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes:
(1)il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.
Loading...