*
To reduce the possibility of audible resonance during copying, the rear fusing plate and
right lower fusing stay have been changed. When replacing either of the old parts in the
field, install both new parts as a set. Please refer to Bellini RTB No.4 for details.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220, 230,
Dog-ears have a tendency to occur when using curled paper.
To minimize this, the following modification has been applied to machines in mass
production:
The height of the entrance guide has been raised 1 mm, changing the shape of both the
entrance guide and entrance cooling support guides. When replacing either of the old
parts in the field, install both new parts as a set.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERI AL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio
850
Gestetner 3285
Nashated D485
Rex Rotary
2885
Lanier 5485AH220,230,
# New index
Note 1:
The joint gear - 15Z (white gear: AB013748) which was included in the old toner supply
unit (A2943200), has been packed in the accessory plastic bag. The idler gear - 15Z
(A2943255) has been included in the new toner supply unit (A2943202). Please refer to
RTB No. 001 for details.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220, 230,
#New index
As per Lanier's request, the relay key counter harness has been added to the Lanier
production machines. Please refer to RTB No.5 for details.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
A2944161 (Upper Fusing Exit Guide) and A2944165 (Exit Guide Bracket) were not
manufactured correctly in accordance with diagrams during the early stages of production.
The Production Division made corrections to the Upper Fusing Exit Guide and Exit Guide
Bracket by welding or gluing the spacer to conform to the diagrams. In addition, the parts
are now manufactured correctly and function normally in combination. If either of the two
parts needs to be replaced in the field, it may be impossible to replace the part individually.
To prevent this, the part numbers for both have been changed.
Therefore, when either of the old parts needs to be replaced in the field, they shouldboth be replaced together as a set. For parts control, the old parts (A2944161 and
A2944165) are not supplied any more.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
Bellini
S. America
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600100045
EuropeA294-24L0659120006
Europe, etc.A294-264B10100001
Europe etc.A294-27H3600100001
Date:
A294-14L0659120001
A294-15H3600100157
A294-17H3691200075
06-Apr-00
JAPAN
PRODUCTION
No.:
MA294008
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Paper Dust Cleaner & Sensor Board Guide
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2292619A2942619Sensor Board Guide1 - 1X/O712
New part
DescriptionQ’tyIntPageIndex Note
number
A0962607Paper Dust Cleaner1 - 2691
Date:
20-Apr-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294009
H.K.
To meet standards
( )
To improve copy quality, the production machines have been modified as follows:
1. A second cutout has been added to the sensor board guide (see below).
2. A second paper dust remover (Paper Dust Cleaner) has been added to the rear of the
sensor board guide.
Note: Since there are other parts already attached to the front side, the paper dust cleaner
was attached to the rear side.
Sensor Board Guide
Second cutout
Second paper dust cleaner
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650030041
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600300131
A294-14L0650030001
A294-15H3600400632
A294-17H3600300495
!"#$%& M
odificationBulletin
PAGE: 1/1
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Anti-static Brush
Parts catalog correction
To facilitate assembly
Part standardization
Date:
Vendor change
To improve reliability
Other
Please correct your parts catalogue as follows:
Not listed
Please add the following part to your parts catalogue.
Incorrect
part number
Correct
DescriptionQ’tyIntPageIndex Note
part number
B3011134Anti-Static Brush141*17
Illustration Correction
Please correct the illustration on page 40 as shown:
24-Apr-00
Prepared by:
To meet standards
No.:
H.K.
( )
MA294010
*: New Index
ADF front side
3:B3011131
17: ANTI-STATIC BRUSH
B3011134
3:B3011131
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
Front Filter Holder Cover
Parts catalog correction
To facilitate assembly
Part standardization
New part
DescriptionQ’tyIntPageIndex Note
number
A2943264Filter Holder Cover - Front283*36
Date:
16-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294011
H.K.
To meet standards
( )
*:New Index
When removing and/or re-installing the development unit during servicing, the front toner
filter should not be touched. This may cause the front toner filter to become incorrectly
positioned. This may cause toner to leak from its gap. To facilitate servicing, two
translucent sheets (A2943264) have been added to the front filter holder to cover the
holder.
Front Toner Filter
0∼2 mm
0∼2 mm
Front Filter Holder Cover
(Translucent Sheet)
0∼2 mm
0∼2 mm
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
16-May-00
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650030041
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600300131
A294-14L0650030010
A294-15H3600400632
A294-17H3600300422
No.:
MA294011
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
AB032716Idle Pulley - M18213322
Bellini
Pulley - M18
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
AB032721Pulley - M182X/O13322
DescriptionQ’tyIntPageIndex Note
Date:
16-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294012
Hiroki Kobayashi
To meet standards
( )
To ensure proper rotation of the timing belt, one flange has been attached to either side of
the pulley. Previously, there was only one flange.
Old: Idle Pulley - M18
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600300041
EuropeA294-24L0650030030
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600300090
New: Pulley - M18
A294-14L0650030001
A294-15H3600300239
A294-17H3600300359
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
105 CPM Version Information
Parts catalog correction
To facilitate assembly
Part standardization
Date:
26-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294013
H.K.
To meet standards
( )
To start production of the 105 CPM (A295) version, the following unique parts have been
registered as spare parts.
number
AX430055Fusing Lamp - 230v/630w31058
A2954066Hot Roller Unit - 240v Usa1105*
A2954111Hot Roller Unit - 230v1105*
A2954206Fusing Paper Exit Unit - 240v
USA
A2954207Fusing & Paper Exit Unit - 230v
(EU)
A2955094MCU Board Harness1472
A2955172Hard Disk - Fireball Plus Kx21451
A2956930Model Name Plate - Svn118138
A2956934Model Name Plate - Lanier118138
A2956931Model Name Plate - Ges118138
A2956932Model Name Plate - Nsa118138
A2956933Model Name Plate - Rex118138
A2951285Right Front Door (Ricoh Only)1159
A2956912Right Front Door (Infotec Only)1159
A2957207Copier Operating Instructions Lt
(Ric)
A2957297Copier Operating Instruction Eng
Lt (Savin)
A2957260Copier Operating Instruction Eng
A3 (Inf)
A2957237Copier Operating Instruction Eng
Lt (Lan)
A2958607System Operating Instructions-
Eng Lt (Ric)
A2958697System Operating Instructions-
Eng Lt (Savin)
A2958660System Operating Instructions-
Eng A3 (Inf)
A2958637System Operating Instructions-
Eng Lt (Lan)
A2293899Transfer Belt1971
A2953810Transfer Belt Unit1497*
DescriptionQ’tyIntPageIndexNote
1103*
1103*
118139
118139
118139
118139
118140
118140
118140
118140
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
26-May-00
No.:
MA294013
NOTE:
1. To meet the EMI (Electro Magnetic Interference) standards, a grounding harness is
used for the A295 copier SBU instead of the ground plates (A2941839). The grounding
harness is included in the scanner lens unit.
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22
EuropeA294-24
Europe, etc.A294-26
Europe etc.A294-27
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27
A294-14
A294-15
A294-17
A295-14
A295-15
A295-17
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
AW010078Photosensor H=502 - 14319
Bellini
Original Length Sensor 1
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
A2941843Photosensor With Filter - H500 - 1X/O43*21
DescriptionQ’tyIntPageIndex Note
Date:
29-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294014
H.K.
To meet standards
( )
*: New Index
It was found in the Japanese field that A4 sideways originals might be detected as A3 in
platen mode. This malfunction might occur because original length sensor 1 mistakenly
detects fingerprints in platen mode. To correct this, the original length sensor has had a
filter added to reduce sensitivity.
Original Length Sensor 1
21: New Index
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
29-May-00
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600300001
EuropeA294-24L0650030030
Europe, etc.A294-264B10300001
Europe etc.A294-27H3600300051
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650030001
A294-15H3600300239
A294-17H3600300359
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
No.:
MA294014
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Spring Plates
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2943862A2943868Rear Frame Spring Plate1X/O9713
A2943865A2943879Front Spring Plate1X/O9721
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
30-May-00
Prepared by:
Vendor change
To improve reliability
Other
To meet standards
( )
Transfer Belt
Transfer
Unit Case
H.K.
No.:
MA294015
Power
Pack
Connector
Spring
Plates
Lever
In the domestic field, the spring plates were sometimes bent downwards and the transfer
belt was not released from the drum after the copy job finished. To reduce the possibility of
this symptom, the production machines have been modified as follows:
The shape of the spring plates (front & rear) has been changed to a straight type.
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
30-May-00
Old
New
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650050011
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600400584
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650050001
A294-15H3600400632
A294-17H3600400077
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Operating Instructions (NRG)
Parts catalog correction
To facilitate assembly
Part standardization
Date:
08-Jun-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294017
H.K.
To meet standards
( )
The responsibility for printing the operating instructions for the products for NRG Europe has been
transferred from RCL to REBV. As of April 2000 production, these documents are not packed
together with the machines at factory release in Japan. Therefore, SPC can no longer provide
them as service parts.
Old part
number
A2947290-Copier Operating Instructions
A2948690-System Operating Instructions
New part
number
DescriptionQ’tyIntPageIndex Note
1-018139
Eng A3 (NRG)
1-018140
Eng A3 (NRG)
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24
Europe, etc.A294-26
Europe etc.A294-27
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27
A294-14
A294-15
A294-17
A295-14
A295-15
A295-17
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
Spring
From:
Bellini
Web Cleaning Roller & Cleaning Pressure
Technical Services Dept., GTS Division
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Date:
10-Jul-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294018
H.K.
To meet standards
( )
1. Parts Catalogue Correction
In preparation for the modifications mentioned in #2 below, please correct the following
P/N - index number mismatch in your Parts Catalogues:
A2944134A2944132Oil Supply & Cleaning Web Unit1X/O1013
New part
number
DescriptionQ’tyIntPageIndex Note
X/O
as a
set
Please refer to RTB No.023 for details.
Note:
The old Cleaning Pressure Springs and Web Cleaning Roller are no longer supplied as
service parts. These should be replaced with the new parts mentioned above.
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
10-Jul-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600500001
EuropeA294-24L0650050011
Europe, etc.A294-264B10500001
Europe etc.A294-27H3600500073
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650050001
A294-15H3600500197
A294-17H3600500347
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
!"#$%M
odificationBulletin
PAGE: 1/1
Model: BelliniDate:
Modified Article:
From:
Technical Service Dept., GTS Division
Reason for
Modification:
Old part
number
A2944253A2944254Transport Belt - Paper Exit5X/O1091
Transport Belt
Parts catalog correction
To facilitate assembly
Part standardization
New part
number
Vendor change
To improve reliability
Other
DescriptionQ’tyIntPageIndex Note
14-Jul-00
Prepared by:
No.:
MA294021
H.K.
To meet standards
( )
During a continuous sequence of long duplex copy jobs, the transport belts in the fusing
exit section receive heat from the copy paper. This can cause the rubber belts to become
slack, which in turn can cause the belts to come off the rollers. To improve the durability of
the transport belt, the belt material has been changed to a heat-resistant silicone rubber.
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,