Page 1
!"#$% M
odification Bulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Dolphin
Parts Catalog
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Please correct your Parts Catalogs as follows:
2. Exterior 2 (Pg. 11)
Part number
Incorrect
B0101382
Correct
B0101209
Left Rear Cover 11 21
Description Page Index
29. Electrical Section (Pg. 65)
Incorrect
Index Part
Description
number
8 B0105140 MCU Board
124 11070957 Fuse – 20A(120V)
125 11070885 Fuse – 6.3A 250V
125 11070919 Fuse – 8A 125V
126 11070907 Fuse – 6.3A 125V)
127 11070869 Fuse – 6.3A 125V
Date:
31-Jul-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB010001
F. Noguchi
To meet standards
( )
Correct
Index Part
Description
number
8 B0105071 MCU Board (120V)
8 B0105076 MCU Board (230V)
124 11070967 Fuse – 20A 380V (120V)
125 11070868 Fuse – 5A 125V (120V)
125 11070879 Fuse – 5A 250V (230V)
126 11070919 Fuse – 8A 125V (120V)
126 11070879 Fuse – 5A 250V (230V)
127 11070907 Fuse – 6.3A 125V (120V)
127 11070885 Fuse – 6.3A 250V (230V)
124
127
126
125
Page 2
!"#$% M
odification Bulletin
PAGE: 2/2
Model:
Dolphin
31. Frame Section 2 (Pg. 69)
Part number
Incorrect
B0101380
11060068
Correct
B0101384
11060063
Base – Gasket – Lower Left 69 25
Bushing – 10.2 M5X10 69 105
32. IPU Board (Pg. 77)
Part number
Incorrect
A2975230
Correct
B0105225
IC - HDC 77 1
34. MCU Board (Pg. 87)
Part number
Incorrect
B0105140 MCU Board
Correct
B0105071
B0105076
MCU Board (120V)
MCU Board (230V)
Date:
31-Jul-01
Description Page Index
Description Page Index
Description Page Index
87
*
No.:
MB010001
36. Special Tools (Pg. 93)
Part number
Incorrect
52039501
Correct
52039502
Description Page Index
Grease 501 93 1
Page 3
!"#$% M
odification Bulletin
PAGE: 1/1
Model:
Dolphin
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Upper Guide Rod - Original Tray
Parts catalog correction
To facilitate assembly
Part standardization
Date:
27-Sep-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB010002
F. Noguchi
To meet standards
( )
The length of the Upper Guide Rod has been increased from 239 to 289 mm to ensure
that the original does not fold over onto the operation panel after feeding.
Old part
number
B0106332 B0106333 Upper Guide Rod – Original Tray 3 X/O 9 32
New part
number
Description Q’ty Int Page Index Note
RCL (Japan) Production
MODEL NAME V/Hz DESTINATION CODE SERIAL NO.
RICOH Aficio 470W 120/60 USA, Canada, S. America B010-17 J2010800001
Nashuatec A070
Gestetner A070
Rex Rotary A070
RICOH Aficio 470W 220-240/50, 60 Europe, Asia, Oceania, etc B010-27 J2010800023
220-240/50, 60 Europe, etc. B010-22 J2010800058
Page 4
!"#$% M
odification Bulletin
PAGE: 1/1
Model:
Dolphin
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization
Date:
28-Sep-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB010003
F. Noguchi
To meet standards
( )
Please correct your Parts Catalogs as follows.
1. The Part Number, Description, Qty. have been corrected:
Part number Description Q’ty Page Index Note
Incorrect 07080050B Washer – M5 n 89 104
Correct B0102917 Spacer – 5x12x2.3 16
89 104
2. Three index callouts for the same part (Spacer, #104) have been added to the
illustration on pg. 89:
Page 89 31. Frame Section 2
#104: B0102917
#104: B0102917
#104: B0102917
Page 5
!"#$% M
odification Bulletin
PAGE: 1/1
Model:
Dolphin
Modified Article:
From:
Technical Service Dept., GTS Division
Reason for
Modification:
HDD, Leveling Foot Guide and Stand Holder
Parts catalog correction
To facilitate assembly
Part standardization
Date:
12-Dec-01
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB010004
F.Noguchi
To meet standards
( )
Please note the following 2 changes:
1. The HDD has been changed, as the manufacturer has taken the present HDD out of
production.
2. The Leveling Foot Guide and Stand Holder have been changed due to parts
standardization with other models (see below).
Old part
number
A6915862 HDD - ATA QLCT20-10G
AH013008 Leveling Foot Guide
54001041 Stand Holder
New part
Description Q’ty Int Page Index Note
number
A2945173 HDD -ATA SU6
B0231101 Leveling Foot
AA143780 Hexagonal Bolt – M12x60
2 - 2 O/O 69 11
4 - 4 O/O 69 20
4 - 4 O/O
69
21
*1: These parts should be replaced as a set.
*1
*1
Stand Holder Hexagonal Bolt – M12x60
54001041 AA143780
Leveling Foot Guide Leveling Foot
AH013008 B0231101
Loading...