Ricoh A988 Modification Bulletin RE9

MODIFICATION BULLETIN NO. 1 PAGE 1 OF 2

ISSUED ON: September 15, ’93

Model Editor Board for PDC - 1E Volt/Hz

Modified Article Editor Hinge and Mounting Bracket

Reason for

Parts catalog correction

Modification

Correct the part numbers of the following parts:

Incorrect Correct

Index Page

P/N Description P/N Description
17 3 A9881300 Mounting Bracket A9881310 Mounting Bracket
23 3 A9881310 Editor Hinge A9881300 Editor Hinge

Date of

Modification

Serial Number

T. Ito, Manager
Copier Technical Support

MODIFICATION BULLETIN NO. 1 PAGE 2 OF 2

ISSUED ON: September 15, ’93

MODEL NAME

Ricoh RE9 115/60 USA A988-17 —

Gestetner EB315 220, 230, 240/50 Europe etc. A988-25 —

Ricoh RE9 220, 230, 240/50 Europe etc. A988-27 —

V/Hz DESTINATION CODE SERIAL NUMBER

MODIFICATION BULLETIN NO. 2 PAGE 1 OF 3

ISSUED ON: September 15, ’93

Model Editor board for PDC - 1E (-25, -27 only) Volt/Hz

Modified Article Intermediate Board

Reason for

To stabilize the 5V line level between the editor board add the PDC - 1E

Modification

Draw

No.

Old Parts

No.

New Parts

No.

A9885517 Intermediate Harness
A9885519 Intermediate Board

Description Rank

Q’ty Used

Old → New

0 → 1
0 → 1

Inter-

change-

ability

Date of

Modification

Part needed for replacement by new part

Part No. Description No. Page

Serial

Number

Parts

Catalog

* 4 5
* 5 5

Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
I Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable