Ricoh 5946 Modification Bulletin SCTYPA

MODIFICATION BULLETIN NO. 8 Page 1 of 3 ISSUED ON: July 15, ’91
Model Sorter Connector Unit Type A Volt/Hz
Modified Article EPROM on the sorter main board
Reason for
To minimize paper jams in the second sorter with the F22.
Modification
An extra ROM and the EPROM replacement procedure (see fig. 1) for the sorter has been packed in the accessory box of the sorter connector unit. This ROM is to replace the ROM on the 1st. sorter main board, if the 1st. sorter has a ROM with P/N 59375603 or 59375613 (No suffix to " F " ) on the main PCB and the sorters will be connected to the F22. From the following S/N of sorter (see table 1), a ROM with P/N 59375613 " G" has been installed at the factor. For those sorters, it is not necessary to replace an original ROM with a ROM in the connector unit.
* New
Date of
Modification
Serial Number
MODIFICATION BULLETIN NO. 8 Page 2 of 3 ISSUED ON: July 15, ’91
Model S/N
5937 -- 11 (Pitney Bowes) No production
-- 15 (Savin) 94105XXXXX
-- 17 (Ricoh USA) No production
-- 25 (Nashua) 9210300859
-- 26 (Infotec) No production
-- 27 (Ricoh Europe) No production
A462 -- 15 (Savin) 385106XXXX
Figure 1
-- 17 (Ricoh USA) 2451020001
-- 26 (Infotec) 3860410001
-- 27 (Ricoh Europe) 2451020046
Table 1
T. Ito, Manager Copier Technical Support
MODIFICATION BULLETIN NO. 8 Page 3 of 3 ISSUED ON: July 15, ’91
MODEL NAME
Sorter Connector Unit
Type A
Sorter Connector Unit
Type A
Infotec Sorter
Connector Unit Type A
V/Hz DESTINATION CODE SERIAL NUMBER
115/60 USA, Canada 5946-17 21105XXXXX
220,240/50 Europe, etc. 5946-27 2101200505
220,240/50 Europe 5946-27 3441200001
Loading...
+ 5 hidden pages