Ricoh 5918 Modification Bulletin DF34
MODIFICATION BULLETIN NO. 39 Page 1 of 3 ISSUED ON: Feb. 15, ’91
Model ADF for P201/F9/F80 Volt/Hz
Modified Article Separation Motor
Reason for
To ensure parts delivery and to facilitate service
Modification
Draw
No.
Old Parts
No.
58865480 Separation Motor - DC21W 1 → 0
New Parts
No.
59189502 Motor - DC21W Kit 0 → 1 O/O
Description
Date of
Modification
A.B.C.
Rank Part No. Description Index No. Page
Q’ty Used
Old → New
Inter-
change-
ability
Part needed for replacement by new part Parts Catalog
F9
P201
F80
F9
P201
F80
Serial Number
5
5
5
5
5
5
1 - 55
9 - 7
5 - 7
1 - 55
9 - 7
5 - 7
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
DETAILS OF MODIFICATION
The separation motor modification was documented by MB No. 14 as follows:
Old P/N New P/N ICA
#58865480 Separation Motor - DC21W
#59182292 #59182270 X/X Pulley - 15T
The manufacturer no longer has a mold for the old motor (#58865480)
To ensure parts delivery and to facilitate service, the motor kit (#5189502), which is compo sed of the two new parts
(#59365501 and #59182270), is supplied as a spare part instead of the old motor (#58865480).
MODIFICATION BULLETIN NO. 39 Page 2 of 3 ISSUED ON: Feb. 15, ’91
#59365501 X/X Transport Drive Motor - DC21W
T. Ito, Manager
Copier Technical Support
Loading...