Ricoh 5894 Modification Bulletin DF32

MODIFICATION BULLETIN NO. 15 Page 1 of 3 ISSUED ON: Feb. 15, ’91

Model ADF for F3/4 Volt/Hz

Modified Article Separation Motor

Reason for

To ensure parts delivery and to facilitate service

Modification

Draw

No.

Old Parts

No.

58865480 Separation Motor - DC21W 1 → 0 41 4 - 9

New Parts

No.

58869500 Motor - DC21W Kit 0 → 1 O/O 41 4 - 9

Description

Date of

Modification

A.B.C.

Rank Part No. Description Index No. Page

Q’ty Used

Old → New

Inter-

change-

ability

Part needed for replacement by new part Parts Catalog

Serial Number

Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable

DETAILS OF MODIFICATION

The separation motor modification was documented by MB No. 14 as follows:

Old P/N New P/N ICA

#58865480 Separation Motor - DC21W

#58862202 #58862250 X/X Pulley - 18T

The manufacturer no longer has a mold for the old motor (#58865480)
To ensure parts delivery and to facilitate service, the motor kit (#58869500), which is comp osed of the two new

parts (#AX060027 and #58862250), is supplied as a spare part instead of the old motor (#58865480) .

MODIFICATION BULLETIN NO. 15 Page 2 of 3 ISSUED ON: Feb. 15, ’91

#AX060027 X/X Transport Drive Motor - DC21W

T. Ito, Manager
Copier Technical Support