Ricoh 5506 Modification Bulletin AP1600

MODIFICATION BULLETIN NO. 5506-68 Page 1 of 2 ISSUED ON: May 15, ’91

Model RICOH AUTO PRINTER AP1700 Volt/Hz

Modified Article Power Supply Cord Bracket 220/240V March ’91 57063 ∼

Reason for

Old part no longer available.

Modification

Draw

No.

Old Parts

No.

55063088 55063087

11060374 11060132 Cord Stopper 1 → 1 X/X 108 1-89

New Parts

No.

Description

Power Supply Cord Bracket

- 220/240V

A.B.C.

Rank Part No. Description Index No. Page

Q’ty Used

Old → New

1 → 1 X/X

Inter-

change-

ability

Part needed for replacement by new part Parts Catalog

Note 1: X/O as a set

Note 2: Old P/N (11060374) was missing

on the parts catlog

Date of

Modification

Serial Number

5 1-89

Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable

DETAILS OF MODIFICATION

MODIFICATION BULLETIN NO. 5506-68 Page 2 of 2 ISSUED ON: May 15, ’91

The new power cord stopper (P/N 11060132) is now procured from a new vender, because the
old power cord stopper (Index 108 : P/N 11060374) is no longer available. A new power cord
stopper smaller than the old type is used. With this modification, the slot hole on the power cord
bracket (Index 5) has also been reduced as shown below:

Old Bracket (P/N 55063088)

20

22

New Bracket (P/N 55063087)

16

14.5

T. Ito, Manager
Copier Technical Support