Part needed for replacement by new partParts Catalog
* New Index
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
Page 2
MODIFICATION BULLETIN NO. 32 Page 2 of 3ISSUED ON: June 30, ’91
DETAILS OF MODIFICATION
According to the M10 MB No. 27, the following parts were changed to standardize the slider drive parts.
P/N 52031823P/N 52141834
X/X
X/X
P/N 52141835
X/O (As a set)
P/N 52031833 (New Part)
However, P/N 52031823 (clutch control ratchet) is no longer available. To continue supplying parts to the field, P/N
52039503 has been registered as a service part instead of P/N 52031823.
P/N 52039503 (Clutch Control Ratchet)
Contents1. P/N 52141834 (Scan Clutch Spring Ass’y)
2. P/N 52141835 (Return Clutch Spring Ass’y)
3. P/N 52031833 (Collar - Return Gear Boss)
T. Ito, Manager
Copier Technical Support
Page 3
MODIFICATION BULLETIN NO. 32 Page 3 of 3ISSUED ON: June 30, ’91