How it Works
Rice Lake
Loading...
Retail Scales
User Manual
30 pgs2.17 Mb0
User Manual
32 pgs2.95 Mb0
User Manual
1 pgs153.42 Kb0
User Manual
37 pgs12.16 Mb0
User Manual
2 pgs3.75 Mb0
Table of contents
Loading...

Rice Lake Retail Scales User Manual

™
MajorSlice
Manual Stainless Steel Professional Slicer
300M
Operator's Manual
Professional Series - All Stainless Steel Construction
PN 166125 Rev B

Contents

1.1 Safety Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1 MajorSlice 300 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Sharpener Assembly Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.1 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2 Cleaning, Sanitizing and Inspection Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3 Sharpen Knife. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.4 Electrical Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Brand Name: DADAUX GASTROTECH
© Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America.
Rice Lake Weighing Systems is an ISO 9001 registered company.
Specifications subject to change without notice.
December 12, 2014
ii MajorSlicer 300 Operator’s Manual
Rice Lake continually offers web-based video training on a growing selection
of product-related topics at no cost. Visit www.ricelakeretail.com/webinars.

1.0 Introduction

WARNING
Important
Authorized distributors and their employees can view or download this manual from the Rice Lake Weighing Systems distributor site at

1.1 Safety Section

FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
• FOLLOW set-up instructions provided for proper installation.
www.ricelakeretail.com.
Study the Following Safety Rules
• NEVER touch this machine without training and authoriza
tion from your supervisor.
• Machine MUST be on a solid level support.
• Guards MUST be in place before plugging in and turning on machine.
• ALWAYS use the three (3) pronged grounded plug provided.
• ALWAYS use the Product Grip - NOT your hand.
• NEVER touch the rotating knife.
• ALWAYS keep your fingers, hands and clothing away from moving parts.
• ALWAYS turn OFF and UNPLUG machine before cleaning or servicing.
• NEVER operate machine with objects NOT provided by the manufacturer.
• Carriage tray (#11) and sharpener are calibrated to the unit and are not interchangeable with any other units.
• Lift only at the bottom of the unit. Lifting at any other area may cause damage to the components and will void the warranty.
Introduction 1

2.0 Installation and Operation

Note
Note
WARNING
Important
WARNING

2.1 Installation

Notify the carrier immediately if shipping carton is damaged. If equipment is damaged notify the carrier within five (5) days and save all documents.
1. Carefully remove packing material from top and sides of machine.
Avoid touching exposed knife.
Lift only at the bottom of the uni will void the warranty.
t. Lifting at any other area may cause damage to the components and
2. With the assistance of another person, lift machine from the carton by lifting from the bottom of the machine base.
Never pick up the machine by the knife guard or gauge plate.
3. Place machine on a solid level table or support.
4. Inspect machine for damage and proper guard placement.
5. Plug machine into a properly grounded outlet using t
he plug supplied with the machine. The proper voltage
use will be specified on the machine serial number plate.
6. Test the machine power by turning on the
If the machine is not running correctly turn off immediately and unplug and contact your service agent.
power switch.
7. Clean and sanitize machine before using (See Section 4.2 on page 13).
2 MajorSlicer 300 Operator’s Manual

2.2 Operation

11
12
10
13
14
1
16
3
4
Back
Front
WARNING
Figure 2-1. Slicer Operation
1. Close the (#4) index control knob by turning clockwise.
2. Pull back the (#13) product grip using
3. Load the product to be sliced
into the (#11) carriage tray.
the (#14) product grip handle.
4. Open the (#10) gauge plate to the desired slice thickness using the (#4) index control knob by turning counter clockw
ise.
5. Turn the machine on at the (#3) power switch.
Never reach into the carriage tray with the gauge plate or index knob in the open position!
6. Slice the desired product by pushing and pulling the (#12) carriage handle.
7. When finished, close the (#4) index control knob by turning it clockwise.
8. Power off the machine at the (#3) power switch.
9. Remove the sliced product from the (#16) re
10. Remove the remaining unsliced product from the
11. Clean (See Section 4.2 on page 13) and prepare machine for the ne
ceiving side of the (#1) machine base.
(#11) carriage tray.
xt product to be sliced.
Installation and Operation 3

3.0 Parts

GR2
3
4
5
GR6 7 11
GR123
23
VT22
18
GR8
GR137
GR135 GR136
GR138 GR139 GR138
GR110
GR140
GR146
17
GR16
GR15
102
GR153
GR150 GR152
GR154
GR151
53
103
GR144
GR14
GR145
GR10
9
GR12
GR12
GR22
GR130
GR1
GR70
GR76
GR77
GR27
GR112
120
GR113
120
GR122
GR121
GR134
GR19 GR20
GR21
132
GR131
59
60
GR62
16
54
55
56
58
57
71
54 57
56
40
41
47
61
60
63
44
46
43 42
52
51
49
53
3.1

MajorSlice 300 Parts

Figure 3-1. MajorSlice 300 Parts Diagram
Item # Part No. Description Reference Qty
3 Reinforcement Support Stainless Steel 304 1 4 Nut M8 Stainless Steel A2 3 5 Stop Plug – Reinforcement Support PEHD 3 7 Screw – Gauge Plate Mount Stainless Steel A2 2
9 Index Excentrique Stainless Steel 304 1 11 Washer – Spacer PTFE 1 17 Fastening Ring - Excentrique PEHD 1 18 Washer, C3-161-30-34-16 PTFE 2 23 Flat Head Sloted Screws, M6-12 Stainless Steel A2 4 40 Housing – Rail Slide Aluminium 1 41 Tension Screw – Housing – Rail Slide Stainless Steel 304 1 42 Top Port Screw – Housing – Rail Slide, M5-10 Stainless Steel A2 1 43 Bearing Cylinder – Exterior Stainless Steel 304 1 44 Spring – Bearing Cylinder Stainless Steel 1
4 MajorSlicer 300 Operator’s Manual
Item # Part No. Description Reference Qty
46 Center Stud – Bearing Cylinder Stainless Steel 304 1 47 Circle Clip Ø21 Stainless Steel A2 1 49 Ball Bearing (608 2rs) Ø22/8 E.7 Stainless Steel 1 51 Support Bracket – Housing – Rail Slide Stainless Steel 304 1 52 Screw CHC M6-16 Stainless Steel A2 2 53 Circle Clip Ø8 Stainless Steel A2 1 54 Elastic Band, F5-13-13-10 Polyvinyl 2 55 Ring – Bronze, Ø14/12 Lg,12 Bronze 2 56 Spring Stainless Steel 2 57 Spring Cylinder Stainless Steel 304 1 58 Screw M6-8 Stainless Steel A2 1 59 Screw – Front Slide Rail Stainless Steel 304 1 60 Spring Stainless Steel 2 61 Cylinder Bearing - Round Slide Rail Ø28/25,
C3-151-25-28-20 63 Screw – Rear Slide Rail Stainless Steel 304 1 71 Front Slide Rail 1
102 Screw – Index Control Excentrique, Sans Tete M8 Stainless Steel A2 2 103 153681 Foot 4 120 153686 Roller Bearing – Knife, 6004 2RS 1 132 Knob – Shaft – Knife Cover Stainless Steel 304 1
GR1 Body/Base Stainless Steel 304 1 GR100 Cover - Screw - Product Grip Slide Rail Stainless Steel 304 1 GR110 153683 Belt Polyvinyl 1 GR112 Pulley Shaft Stainless Steel 304 1 GR113 Pulley Shaft Alunimnium 2017 1
GR12 153677 Bronze Screw M8-30 Bronze 2 GR121 Cirle cliip Ø19 Stainless Steel A2 1 GR122 Circle Clip Ø42 Stainless Steel A2 1 GR123 Knife Cover Stainless Steel 304 1 GR130 Pilot - Screw - Upper Ring Guard - Knife Stainless Steel 304 1 GR131 Shaft - Knife Cover Stainless Steel 304 1 GR134 Gasket - Knife NBR 1
GR14 Body Rail Stainless Steel 304 1 GR140 Motor Stand P2 Stainless Steel 304 1 GR144 Screw M8-20 Stainless Steel A2 1 GR145 Motor Stand P1 Stainless Steel 304 1 GR146 Belt Protection Stainless Steel 304 1
GR15 153679 Excentrique ERTACE TAL 1 GR150 Spring Stainless Steel A2 1 GR151 Housing - Rail Slide Bolt Stainless Steel 304 1 GR152 Bearing 1 GR153 Pilot Ring - Bronze bronze 1 GR154 Plastic Washer Plastique 1
GR16 Ring Excentrique Stainless Steel 304 1
GR2 Gauge Plate Stainless Steel 304 1 GR20 Gasket - Indexing Control Knob PTFE 1 GR21 Indexing Control Knob Stainless Steel 304 1 GR27 153680 Knife Shaft Gasket PTFE 1
GR6 Mount - Gauge Plate Stainless Steel 304 +
GR62 Round Slide Rail ACIER CHROME 1 GR70 Ring Guard - Knife Stainless Steel 304 1
GR8 Coupling Guide Stainless Steel 304 1 GR81 Carriage Tray Support Stainless Steel 304 1
VT22 133084 Knife Ø300 ACIER CHROME 1
PTFE 2
Stainless Steel RECTIFIE
1
Parts 5
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use