Rice Lake Weighing Systems is an ISO 9001 registered company. Software version 114154
December 2014, Rev. E
1Rice Lake 550 Digital Chair Scale Operation Manual
1.0Introduction
The Rice Lake 550 Digital Chair scale is efficiently designed to provide accurate, reliable and repeatable weight
measurements and has features that enable a fast and convenient weighing process. The Rice Lake 550 Digital
Chair scale features an ergonomic design, has two armrests that can be lifted separately and a foot rest that can be
folded. Its four swivel casters can be locked in place.
Figure 1-1. Rice Lake 550 Digital Chair Scale
Digital Chair Scale Operation Manual
1
2.0Safety
WARNING
CAUTION
WARNING
Important
With the Rice Lake 550 Digital Chair scale there are certain precautions that should be taken to prevent personal
injury to the user and damage to your scale.
2.1Safety Signals
Safety Signal Definitions:
Indicates a potentially hazardous situation that, if not avoided, may result in death or serious injury
Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment.
2.2Safety Precautions
Do not operate or work on this equipment unless you have read and understand instructions in the
manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact
any Rice Lake Weighing Systems dealer for replacement manuals. Proper care is your responsibility.
Before attempting to operate this unit, make sure every individual who operates or works with this unit
has read and understands the following safety information. Please
follow these instructions carefully.
•Do not transport the scale while the platform is loaded.
•Always lock the caster brakes of the chair before seating the patient.
•Make sure the footrest is in the up position when seating th
e patient.
•Do not drop the scale or subject it to violent shocks.
•For accurate weighing, the scale must be placed on a flat, stable surface.
•For accurate weighing, verify proper operation according to the procedure d
before each use.
•Weight exceeding the maximum capacity (660 Lb/300 K
g) may damage your scale.
•Do not use in the presence of flammable materials.
•Operating at other voltages and frequencies than
specified could damage the equipment. Use only
medically approved AC adaptors.
•If the “
LO Bat” indicator activates, for accurate weighing, replace the batteries or connect the scale to an
AC power source as soon as possible.
•Rice Lake Weighing Systems offers optional AC adapt
ors, utilizing an adaptor not supplied by us voids
all warranties.
•These scales are used to determine weight of people
To avoid cross contamination, the scale plate must be cleaned regularly.
•
weighing which could
weighing proces
the
The scale is not waterproof so avoid cont
•
To prevent injury, do not exert unneces
•
result in potential contamination such as when there is direct skin contact
s.
act with excessive moisture.
sary force on the arm rests.
while sitting.
It is recommended after each
escribed in this manual
during
2 Digital Chair Scale Operation Manual
3.0Scale Assembly
Note
“Parts Inside Box”
Location
3.1Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
•The chair scale
•This manual
Box labeled
•
•The Parts Inside box contains the following:
•Serial communication cable
•AA batteries (6)
•5 mm Allen key
•M6 x 16 Allen screws (4) — (to attach seat to base)
3.2Save Packaging
If the Rice Lake 550 Digital Chair scale must be returned for any reason, it must be properly packed with
sufficient packing materials in the original carton.
Parts Inside
Damage caused by improper packaging is not covered by the warranty.
3.3Setting Up Your Scale
Use the following steps to set up the Rice Lake 550 Digital Chair scale.
Move the box into an area where the scale can be assembled. It’s
level surface for the most accurate weighments.
1. Locate the operator’s manual from inside the box and set it aside as it will
prope
r scale removal and set up.
Figure 3-1. Chair Scale Packaging Once Out of the Box
recommended that the scale be placed on a hard,
provide instructions on the
2. Locate and remove the “Parts Inside” box and locate the 5 mm Allen key.
Digital Chair Scale Operation Manual - Scale Assembly3
3. Remove top Styrofoam piece and remove the seat from the attached Styrofoam.
Note
Figure 3-2. Remove Seat From Packaging
4. Set the seat aside for later assembly.
5. Remove the side and the back handle Styrofoam pieces.
Figure 3-3. Remove Side Styrofoam Pieces From Packaging
The c
hair is heavy so use assistance in taking it out of the box and placing it on the floor, making sure it
does not get dropped.
Figure 3-4. Chair Scale Without Side Packaging Materials
4 Digital Chair Scale Operation Manual
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.