Rheem PROPLUSE55T2RH94EC1 Specifications

INTEGRATED HOME COMFORT

Professional Classic® electric water heaters are engineered for longer life – resistored heating elements and premium grade anode rod

Water

Residential Electric

Professional Classic Water Heaters

Efficiency

• .90 - .93 UEF

• Isolated tank design reduces conductive heat loss

• Resistored copper upper element and resistored Lifeguard

™

stainless steel lower element to prolong anode rod and tank life

Performance

• FHR: 45 - 67 gallons, based on gallon capacity

• Recovery: 21 GPH at a 90° F rise

System Sentinel

(Available on selected models)

• Exclusive diagnostic system with glowing LEDs that verify heating element operation. LEDs pin point the exact location of functioning or nonfunctioning heating elements

Longer Life

• Premium grade anode rod provides long-lasting tank protection

Features

• Electric junction box located above heating elements for easy installation

• Over-temperature protector cuts off power in excess temperature situations

• Automatic thermostat keeps water at desired temperature

Plus…

• Rheemglas® tank lining resists corrosion and prolongs tank life

™

• EverKleen

self cleaning device fights harmful sediment build-up with a high- velocity spiraling water stream – helps operating efficiency by saving energy, money and improving tank life

• Enhanced-flow brass drain valve

• Temperature and pressure relief valve included

• HUD certified for manufactured housing and modular construction

• Low lead compliant

Warranty

• 6-Year limited tank and parts warranty*

With ProtectionPlus™ the 6-year limited

• tank warranty becomes 10-year

* See Residential Warranty Certificate for complete

information

Units meet or exceed ANSI requirements and have been tested according to the AHRI Operations Manual and D.O.E. procedures. Units meet or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, ICC Code and all state energy efficiency performance criteria.

Professional Classic

19.9 to 55-Gallon Capacities 240 Volt AC/Single Phase

Double and Single Element Models

Electric

See specifications chart on back.

INTEGRATED HOME COMFOR

PRINTED IN U.S.A. 05/18 WP FORM NO. PROE RH N Rev. 8

INTEGRATED HOME COMFORT

Water

INTEGRATED HOME COMFORT

Residential Electric

Professional Classic Water Heaters

Professional Classic® Specifications

T Y

NOMINAL

GALLON

CAPACITY

RATED

GALLON

CAPACITY

MODEL

NUMBER

Tall 30 27 PROE30 T2 RH95

Tall 40 36 PROE40 T2 RH95

Tall 50 45 PROE50 T2 RH95

Tall 55 55 PROE55 T2 RH94

Med. 30 27 PROE30 M2 RH95

Med. 40 36 PROE40 M2 RH95

Med. 50 45 PROE50 M2 RH95

†

UEF

FIRST HOUR

RATING

G.P.H.

RECOVERY

IN G.P.H.

90° F RISE

46 21 47-1/2 50-3/8 19-1/4 92 0.92

55 21 60-3/4 63-5/8 19-1/4 109 0.93

63 21 58-5/8 61-5/8 20-1/4 121 0.93

72 21 57 59-3/4 22-1/4 128 0.92

45 21 37-1/2 40-1/2 20-1/4 92 0.90

55 21 48-1/4 50-1/2 20-1/4 106 0.93

62 21 48 50-1/2 23 132 0.93

Short 19.9 – PROE20 S2 RH – 21 31-1/2 31-1/2 17 62 –

Short 28 25 PROE28 S2 RH95 45 21 30 31-1/8 23 95 0.92

Short 30 27 PROE30 S2 RH95 B** 46 21 30-1/8 32 19-3/4 95 0.92

Short 36 33 PROE36 S2 RH95 46 21 31-1/2 33 24-1/4 118 0.92

Short 38 35 PROE38 S2 RH95 B** 51 21 31-1/2 32-5/8 23 108 0.92

Short 47 43 PROE47 S2 RH95 54 21 32 34 26-1/4 149 0.93

DESCRIPTION FEATURES

Uniform Energy Factor and rated gallon capacity based on Department of Energy (DOE) requirements.

†

System Sentinel optional. Add EC1 to the end of the model number. System Sentinel not available on single

element models, available on dual element models only. System Sentinel not available in excess of 5 kW on 208 V models.

** Water heater dimensions prior to installing insulation blanket that is included with water heater.

• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.

• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.

• Single element models available on special order (6000W max.). Substitute “1” for “2” in model number.

• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.

• All models equipped with heat traps.

Recovery = wattage/2.42 x temp. rise °F. Example: 4500W = 21 GPH

2.42 x 90°

Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.

ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.

TANK

HEIGHT

HEIGHT TO

WATER CONN.BDIAMETER

APPROX. SHIP WT.

(LBS.)

UNIFORM

ENERGY FACTOR

HOT

WATER

CONNECTION

RELIEF VALVE

CONNECTION

DIAMETER

WATER

CONNECTION

ANODE

ROD

(UEF)

COLD

A B

WATER CONNECTIONS ALL 3/4" N.P.T.

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Rheem Water Heating • 1115 Northmeadow Parkway, Suite 100

Roswell, Georgia 30076 • www.rheem.com

INTEGRATED HOME COMFOR

PRINTED IN U.S.A. 05/18 WP FORM NO. PROE RH N Rev. 8