Professional Classic Plus™ High Efficiency electric
water heaters are engineered for longer life,
high performance and lower operating cost
Water
Residential Electric
Professional Classic Plus
High Efficiency Water Heaters
Efficiency
• .92 - .95 EF
• Isolated tank design reduces
conductive heat loss
• Resistored stainless steel upper and
lower heating elements to prolong
anode rod and tank life
Performance
• FHR: 56 - 88 gallons, based on gallon
capacity
• Recovery rate is 21 gallons at a 90
degree Fahrenheit rise**
System Sentinel
• Exclusive diagnostic system with
glowing LEDs that verify heating
element operation. LEDs pin point the
exact location of functioning or nonfunctioning heating elements
Features
• High performance and lower operating
cost
• Compliant with many electric utility
incentive programs
• Rheem exclusive R-Tech (resistored)
anode rod provides long-lasting tank
protection
• Electric junction box located above
heating elements for easy installation
• Over-temperature protector cuts
off power in excess temperature
situations
• Automatic thermostat keeps water at
desired temperature
Plus…
• EverKleen™ self cleaning device ghts
harmful sediment build-up with a
high- velocity spiraling water stream –
helps operating efciency by saving
energy, money and improving tank life
• Enhanced-ow brass drain valve
• Temperature and pressure relief valve
included
• Low lead compliant
Warranty
• 8-Year limited tank and parts warranty*
• With ProtectionPlus™ the 8-year limited
tank warranty becomes 12-year
* See Residential Warranty Certicate for complete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efciency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efciency performance criteria.
2
ProClub
POINTS
Professional Classic Plus
High Efficiency
40 to 80-Gallon Capacities
240 Volt AC/Single Phase
Double and Single Element Models
Electric
LEED Point = 1
myrheem.com/proclub
See dimensions chart on back.
INTEGRATED HOME COMFOR
PRINTED IN U.S.A. 09/13 WP FORM NO. PRO+E RHHE
Residential Electric
Water
Professional Classic Plus
High Efficiency Water Heaters
Professional Classic Plus™ High Efficiency Specifications
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T
Y FIRST HOUR RECOVERY TANK HEIGHT TO APPROX.
P GAL. MODEL RATING IN G.P.H. HEIGHT WATER CONN. DIAMETER SHIP WT. ENERGY
E CAP. NUMBER G.P.H. 90° F RISE A B C (LBS) FACTOR
Tall 40 PRO+E40 2 RH95 EC1 56 21 46-3/4 46-3/4 22-1/4 104 0.95
Tall 50 PRO+E50 2 RH95 EC1 67 21 57 57 22-1/4 123 0.95
Tall 65 PRO+E65 2 RH92 EC1 71 21 58-3/4 58-3/4 23 160 0.92
Tall 80 PRO+E80 2 RH92 EC1 88 21 59 59 24-1/2 181 0.92
Med. 50 PRO+E50 M2 RH93 EC1 62 21 46 46 24-1/4 128 0.93
Energy Factor based on D.O.E. (Department of Energy) test procedures.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specically requested.
• System Sentinel not available on single element models, available on dual element models only.
System Sentinel not available in excess of 5 kW on 208 V models.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
• All models equipped with heat traps.
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W = 21 GPH
2.42 x 90°
* *Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
HOT
WATER
CONNECTION
RELIEF VALVE
CONNECTION
8"
C
DIAMETER
WATER
CONNECTION
ANODE
ROD
COLD
A
B
WATER CONNECTIONS ALL 3/4" N.P.T.
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
INTEGRATED HOME COMFOR
PRINTED IN U.S.A. 09/13 WP FORM NO. PRO+E RHHE
2