Rheem Professional Classic Series Atmospheric Specification

T

INTEGRATED HOME COMFORT

Professional Classic™ Atmospheric gas

INTEGRATED HOME COMFORT

water heaters are engineered for more
hot water at a low operating cost

Water

Residential Gas

Professional Classic
Atmospheric Water Heaters

Efficiency

• .58 - .62 EF

• More hot water at a low operating cost

Performance

• FHR: 50 to 90 gallons for natural gas

• Recovery: 30.3 to 50.5 gallons
at a 90 degree rise, based on model

Guardian System™ & Sensor

• Exclusive air/fuel shut-off device

• Maintenance free – no lter to clean

Flame Arrestor PlateCombustion Shut-off System

Maintenance Free

Low Emissions

• Eco-friendly burner, low NOx design

• Meets 40 ng/J NOx requirements

Longer Life

• Rheem exclusive R-Tech (resistored)
anode rod provides long-lasting tank
protection

High Altitude Compliant

• All models certied up to 6,000 ft.
above sea level

• Some models certied up to
10,200 ft. above sea level, check
factory for listings

Plus…

• Easy to light – no matches required

™

• EverKleen

patented system ghts

sediment build-up

• Enhanced ow brass drain valve

• Temperature and pressure relief valve
included

• Low lead compliant

• Standard replacement parts

Warranty

• 6-Year limited tank and parts
warranty*

With ProtectionPlus™ the 6-year limited

•
tank warranty becomes 10-year

* See Residential Warranty Certicate for

complete information

Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efciency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efciency performance criteria.

Professional Classic

Atmospheric

29, 30, 38, 40 and

50-Gallon Capacities

Up to 50,000 Btu/h
Natural and LP Gas

† LEED Point = 1

See dimensions chart on back.

INTEGRATED HOME COMFOR

PRINTED IN U.S.A. 08/14 WP FORM NO. PROG RH Rev. 1

T

INTEGRATED HOME COMFORT

INTEGRATED HOME COMFORT

Residential Gas

Water

Professional Classic
Atmospheric Water Heaters

Professional Classic™ Atmospheric Specifications

DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.

T HT. TO WATER HT. TO WATER
Y
P GAL. MODEL
E CAP. NUMBER NAT. LP NAT. LP NAT. A B C D E F G H (LBS) NAT. LP

Tall 29 PROG29-32N RH62 32 32.3 50 59-3/4 56-3/8 16-1/8 14-1/2 3 8 50-3/4 3/4 100 0.62

Tall 29 PROG29-30P RH62 30 30.3 59-3/4 56-3/8 16-1/8 14-1/2 3 8 50-3/4 3/4 100 0.62

Tall 40 PROG40-36N RH59 36 36.4 67 61-1/2 58 17-3/4 14-1/2 3 or 4 8 53 3/4 120 0.59

Tall 40 PROG40-38N RH59 38 38.4 73 61-3/4 58-3/8 18-1/8 14-1/2 3 or 4 8 52-1/4 3/4 120 0.59

Tall 40 PROG40-32P RH59 32 32.3 61-3/4 58-3/8 18-1/8 14-1/2 3 or 4 8 52-1/4 3/4 120 0.59

Tall 38 PROG38-40N RH60 40 40.4 68 61-1/2 57-3/4 19-3/4 14-1/2 3 or 4 8 52-1/4 3/4 125 0.60

Tall 38 PROG38-34P RH60 34 34.3 61-1/2 57-3/4 19-3/4 14-1/2 3 or 4 8 52-1/4 3/4 125 0.60

Tall 40 PROG40-40N RH62† 40 40.4 68 63-1/4 59-3/4 21 14-1/2 3 or 4 8 53-1/2 3/4 135 0.62

Tall 40 PROG40-34P RH60 34 34.3 63-1/4 59-3/4 21 14-1/2 3 or 4 8 53-1/2 3/4 135 0.60

Tall 50 PROG50-40N RH62† 40 40.4 83 62-1/4 58-3/4 23 14-1/2 3 or 4 8 52-1/2 3/4 165 0.62

Tall 50 PROG50-36P RH62† 36 36.4 62-1/4 58-3/4 23 14-1/2 3 or 4 8 52-1/2 3/4 165 0.62

Tall 50 PROG50-38N RH58 38 38.4 90 61-1/2 58-1/4 20-1/8 14-1/2 3 or 4 8 51-3/8 3/4 130 0.58

Tall 50 PROG50-36P RH58 36 36.4 61-1/2 58-1/4 20-1/8 14-1/2 3 or 4 8 51-3/8 3/4 130 0.58

Tall 50 PROG50-40N RH58 40 40.4 82 61-1/2 58 21-3/4 14-1/2 3 or 4 8 52-1/2 3/4 150 0.58

Tall 50 PROG50-36P RH58 V2 36 36.4 61-1/2 58 21-3/4 14-1/2 3 or 4 8 52-1/2 3/4 150 0.58

Tall 50 PROG50-50N RH58 50 50.5 81 62 58 21-3/4 14-1/2 4 8 52-1/2 3/4 150 0.58

Short 30 PROG30S-30N RH61 30 30.3 50 49-3/4 46-1/4 19-3/4 14-1/2 3 8 40-1/4 3/4 98 0.61

Short 40 PROG40S-40N RH62† 40 40.4 72 53-7/8 50-1/2 23 14-1/2 3 8 44 3/4 135 0.62

Short 40 PROG40S-36P RH62† 36 36.4 53-7/8 50-1/2 23 14-1/2 3 8 44 3/4 135 0.62

Short 40 PROG40S-36N RH59 36 36.4 72 52-3/4 49-3/8 20-1/8 14-1/2 3 8 42-3/4 3/4 130 0.59

Short 40 PROG40S-34P RH59 34 34.3 52-3/4 49-3/8 20-1/8 14-1/2 3 8 42-3/4 3/4 130 0.59

Short 40 PROG40S-40N RH59 40 40.4 72 53-7/8 50-1/2 20-1/8 14-1/2 3 or 4 8 44 3/4 130 0.59

Short 40 PROG40S-36P RH59 36 36.4 53-7/8 50-1/2 20-1/8 14-1/2 3 or 4 8 44 3/4 130 0.59

Short 50 PROG50S-40N RH59 40 40.4 84 54-1/4 49-3/4 22-1/4 14-1/2 3 8 44 3/4 158 0.59

Short 50 PROG50S-36P RH59 36 36.4 54-1/4 49-3/4 22-1/4 14-1/2 3 8 44 3/4 158 0.59

Energy Factor based on D.O.E. (Department of Energy) test procedures.

†LEED Point = 1

GAS INPUT IN RECOVERY IN FIRST HOUR

THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.

HT. TO TANK GAS VENT CONN. SIDE T&P CONN. SHIP.

VENT HT. DIAM. CONN. SIZE CNTR. VALVE SIZE WT.

FLUE

H

HOT

WATER

CONNECTION

F

E

ENERGY

FACTOR

ANODE ROD

H

COLD

WATER

CONNECTION

3/4" N.P.T.

RELIEF

VALVE

OPENING

C

BA

1/2"

D

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Rheem Water Heating • 101 Bell Road

Montgomery, Alabama 36117-4305 • www.rheem.com

INTEGRATED HOME COMFOR

PRINTED IN U.S.A. 08/14 WP FORM NO. PROG RH Rev. 1

G