Rheem Professional Classic Plus Series Atmospheric Specification

T

INTEGRATED HOME COMFORT

Professional Classic Plus™ Atmospheric gas

INTEGRATED HOME COMFORT

CONNECTIO

water heaters are engineered for more
hot water at a low operating cost

Water

Residential Gas

Professional Classic Plus
Atmospheric Water Heaters

Efficiency

• .62 EF

• More hot water at a low operating cost

Performance

• FHR: 68 to 83 gallons for natural gas

• Recovery: 36.4 to 40.4 gallons
at a 90 degree rise, based on model

Guardian System™ & Sensor

• Exclusive air/fuel shut-off device

• Maintenance free – no lter to clean

Flame Arrestor PlateCombustion Shut-off System

Low Emissions

• Eco-friendly burner, low NOx design

• Meets 40 ng/J NOx requirements

Longer Life

• Rheem exclusive R-Tech (resistored)
anode rod provides long-lasting tank
protection

High Altitude Compliant

• All models certied up to 6,000 ft.
above sea level

• Some models certied up to
10,200 ft. above sea level, check
factory for listings

Plus…

• Easy to light – no matches required

™

• EverKleen

patented system ghts

sediment build-up

• Enhanced ow brass drain valve

• Temperature and pressure relief valve
included

• Low lead compliant

• Standard replacement parts

Warranty

• 8-Year limited tank and parts
warranty*

With ProtectionPlus™ the 8-year limited

•
tank warranty becomes 12-year

* See Residential Warranty Certicate for

complete information

Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efciency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efciency performance criteria.

H

HOT

WATER

FLUE

N

BA

1/2"

ANODE ROD

H

COLD

WATER

CONNECTION

F
E

3/4" N.P.T.

RELIEF

VALVE

OPENING

C

G

2

ProClub

POINTS

Professional Classic Plus

Atmospheric

40 and 50-Gallon Capacities

Up to 40,000 Btu/h
Natural and LP Gas

† LEED Point = 1

myrheem.com/proclub

D

DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.

T HT. TO WATER HT. TO WATER
Y
P GAL. MODEL
E CAP. NUMBER NAT. LP NAT. LP NAT. A B C D E F G H (LBS) NAT.

Tall 40 PRO+G40-40N RH62† 40 – 40.4 – 68 63-1/4 60 19-1/2 14 3 or 4 8 53-1/2 3/4 135 0.62

Tall 40 PRO+G40-36P RH62 – 36 – 36.4 – 63-1/4 60 19-1/2 14 3 or 4 8 53-1/2 3/4 135 –

Tall 50 PRO+G50-40N RH62† 40 – 40.4 – 83 62-1/2 59-1/4 21-1/2 14 3 or 4 8 52-1/2 3/4 165 0.62

Tall 50 PRO+G50-36P RH62 – 36 – 36.4 – 62-1/2 59-1/4 21-1/2 14 3 or 4 8 52-1/2 3/4 165 –

Short 40 PRO+G40S-40N RH62† 40 – 40.4 – 72 54 50-1/2 23 14 3 or 4 8 44 3/4 135 0.62

Short 40 PRO+G40S-36P RH62 – 36 – 36.4 – 54 50-1/2 23 14 3 or 4 8 44 3/4 135 –

Energy Factor based on D.O.E. (Department of Energy) test procedures.

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

GAS INPUT IN RECOVERY IN FIRST HOUR

THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.

Rheem Water Heating • 101 Bell Road

Montgomery, Alabama 36117-4305 • www.rheem.com

HT. TO TANK GAS VENT CONN. SIDE T&P CONN. SHIP. ENERGY

VENT HT. DIAM. CONN. SIZE CNTR. VALVE SIZE WT. FACTOR

INTEGRATED HOME COMFOR

PRINTED IN U.S.A. 01/14 WP FORM NO. PRO+G RH