Rheem Professional Classic Direct Vent Co-Axial Specification
T
INTEGRATED HOME COMFORT
FRONT VIEW
T
Water
INTEGRATED HOME COMFORT
Residential Gas
Classic
Professional
Water Heaters for Manufactured Housing
Direct Vent Co-Axial
Professional
Classic
™
Direct Vent Co-Axial
gas water heaters for Manufactured Housing
that are FVIR compliant
Efficiency
• .60 - .62 EF
Performance
• FHR: 80 gallons for 50-gallon model
and 65 gallons for 40-gallon model
• Recovery: 30.3 to 36.4 GPH at a
90° F rise, depending on model
Flexibility
• Field convertible controls and burner
assembly for natural gas or LP
operation included
• Roof jack ange adjustment range
available up to 34° (8 - 12)
• New smaller foot print – no external
air tube
• Can be installed anywhere in the home
• 3/4" hot and cold top connections
• Easily ts into a standard drain pan
Altitude Certification
• All models certied up to 7,700 ft.
above sea level
Self Cleaning
• EverKleen™ patented system ghts
sediment build-up
Plus…
• Certied for manufactured (HUD)
and modular construction
• Enhanced ow brass drain valve
• Factory installed temperature and
pressure relief valve – side location
• Low lead compliant
• Piezo ignition – easy light pilot,
no matches required
Warranty
• 6-Year limited tank and parts
warranty*
* See Residential Warranty Certicate for
complete information
Units meet or exceed ANSI requirements
and have been tested according to D.O.E.
procedures. Units meet or exceed the energy
efciency requirements of NAECA, ASHRAE
standard 90, ICC Code and all state energy
efciency performance criteria.
Professional
Classic
Direct Vent Co-Axial for
Manufactured Housing
40 and 50-Gallon Capacities
Up to 36,000 Btu/h
Natural and LP Gas
Longer Life
• Premium grade anode rod provides
long-lasting tank protection
TOP VIEW OF CLOSET
CONNECTIONS CONNECTIONS
RELIEF
GAS CONTROL
(THERMOSTAT)
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T
Y
P GAL. MODEL
E CAP. NUMBER NAT. LP NAT. LP NAT. LP A B C CONNECTION (LBS) NAT./LP
Tall 40 PROG40-36N RH62 MH DVX 36 30 36.4 30.3 65 65 19-3/4 60-1/2 5 3/4 155 0.62
Tall 50 PROG50-36N RH60 MH DVX 36 32 36.4 32.3 80 80 21-3/4 59-5/8 5 3/4 165 0.60
Energy Factor based on D.O.E. (Department of Energy) test procedures.
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
VALV E
GAS INPUT IN RECOVERY IN FIRST HOUR
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
CO-AXIAL ROOF JACK SIZING TABLE
34° MAX. (8-12 ROOF JACK
PITCH) ROOF JACK ADJUSTMENT
KIT PART NUMBER RANGE (SEE X)
AP14363A 24 - 37 Inches
AP14363B 33 - 68 Inches
AP14363C 45 - 97 Inches
AP14363D 60 - 130 Inches
AP14363E 72 - 160 Inches
NOTE: 42° Max. adjustment roof jacks available.
Roof Jacks must be ordered separately with this direct
vent water heater and installed in accordance with the
instructions furnished with the heater. No other roof jack
or vertical vent kit is approved for installation with this
heater.
TANK VENT SHIP. ENERGY
DIAM. HT. SIZE WATER WT. FACTOR
Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Brampton, Ontario L6Y 0P5 • www.rheem.com
(Purchased Separately)
Adjustment Range
X
ADJUSTABLE TIL
ROOF FLANGE
34° MAX.
(8 - 12 PITCH)
42° MAX. TILT IS
AVAILABLE WITH
OPTIONAL KIT
(10-3/4 - 12 PITCH)
Roof Jack
Roof Jack
C
12"
Min
A
B
INTEGRATED HOME COMFOR
PRINTED IN U.S.A. 02/15 WP FORM NO. PROG RHMHDVX N
Loading...