Rheem PRO40-40FY1, PRO50-45FY1 User Manual
Guardian System
™
•
One-of-a-kind air/fuel shut-off device offers
double protection
•
Maintenance free – no filter to clean
•
Standard replacement parts
Self-Cleaning
•
EverKleen™patented system fights sediment
build-up
•
Reduces fuel costs
•
Provides more hot water
Easy to Light
•
No matches required
Energy Efficient
•
More hot water at low operating cost
High Altitude Compliant
•
All models are certified for applications up to
4,500 feet above sea level
Longer Life
•
Patented magnesium anode rod design protects
the tank from rust
Plus…
•
Brass drain valve and temperature and pressure
relief valve are included
•
Meets or exceeds NRCan requirements
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
HT.TO WATER HT.TO
GAS INPUT IN RECOVERY IN FIRST HOUR HT.TO TANK GAS VENT CONN. SIDE WATER SHIP. ENERGY
THOUS. BTU/HR. G.P.H. 100° RISE DEL. G.P.H. VENT HT. DIAM. CONN. SIZE CNTR. T&P CONN. WT. FACTOR
MODEL NUMBER NAT. LP NAT. LP NAT. A B C D E F G H (LBS) NAT.
PRO40-40FV1 40 36 34 30.5 72 54-1/4 50-1/2 20-1/4 14-1/2 3-4* 8 44 3/4 130 .59
PRO50-45FV1 45 40 38.2 34 88 54-3/8 50-1/2 22-1/4 14-1/2 4 8 44 3/4 160 .58
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number and change BTU input. Example: PRO40-36PFV1.
* The PRO40-40FV1 features a 3-4" combo vent.
Exclusive Professional Installation Warranty
When this Rheem PROFESSIONAL water heater is installed by
a licensed contractor, the consumer can upgrade his limited tank
and parts warranty from 6 to 8 years by returning to Rheem the
warranty registration card and a copy of the contractor’s invoice.
This Rheem exclusive warranty upgrade feature enhances your
value as a plumbing professional. A professional installation is a
better installation.
*Refer to the warranty certificate enclosed with each water heater
for specific details.
E
G
BA
C
F
H
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
D
1/2"
3/4" N.P.T.
RELIEF
VALVE
OPENING
FLUE
ANODE ROD
These units are designed to
meet or exceed ANSI (American
National Standards Institute)
requirements and have been
tested according to C.S.A. test
procedures and meet or exceed
the energy efficiency requirements of NRCan, ASHRAE
standard 90, and all government
energy efficiency performance
criteria for energy consuming
appliances.
Before purchasing this appliance,
read important energy cost and
efficiency information available
from your supplier.
Rheem Guardian System Features…
Flame Arrestor
Plate
A specially-designed
flame arrestor prevents ignition of
vapours outside the
combustion chamber.
Maintenance
Free
Superior air filtration
prevents the flame
arrestor from becoming clogged by lint,
dust and oil.
Exclusive
Combustion
Shut-off System
Should a spill
incident occur, the
Guardian System
shuts off the gas
supply and the air
supply preventing a
sustained vapour
burn in the combustion chamber.
PROFESSIONAL™GAS WATER HEATERS
Upgradeable 6-year limited tank warranty to 8-years*
Upgradeable 1-year limited parts warranty
*See residential warranty information brochure for complete warranty information.
Upgrade your warranty with…
8
YEAR LIMITED
TANK WARRANTY
BECOMES
10
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3
06/06 WP FORM NO. 101-14CAN Rev. 2
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
NOW WITH
SMALLER
DIAMETERS!
®
Loading...