Rheem Prestige Series Single Stage Submittal Sheet

SUBMITTAL COVER SHEET

Quantity

Unit Designation

Model No.

Total Cooling

Sensible Cooling

Air Ent. Evaporator

Air Lvg. Evaporator

Heating Input

Heating Output

CFM/ESP

EER/SEER

Electrical

Minimum Ampacity

Min.-Max. Breaker

Net Unit Weight

Accessory

Catalog Form Number

ACCESSORIES: NOTES:

PRINTED IN U.S.A 01/12 QG FORM NO. M11-1640

PROJECT NAME

LOCATION

ARCHITECT

ENGINEER

CONTRACTOR

SUBMITTED BY DATE

UNIT SUMMARY

UNIT DATA

COOLING PERFORMANCE

EFFICIENCY ..................................

_______

SEER

TOTAL CAPACITY ....................

_______

MBH [kW]

SENSIBLE CAPACITY ..............

_______

MBH [kW]

OUTDOOR DESIGN TEMP. ........

_______

°F [°C] DB

TEMP. OF AIR ENTERING

EVAPORATOR COIL ..............

_______

°F [°C] DB

_______

°F [°C] WB

SUPPLY AIR BLOWER PERFORMANCE

TOTAL AIR SUPPLY ..................

_______

CFM [L/s]

TOTAL RESISTANCE EXTERNAL

TO UNIT........................................

_______

IWC

MOTOR RATING ..........................

_______

HP [W]

ELECTRICAL DATA

POWER SUPPLY ............................

__________ Hz

MINIMUM WIRE SIZE ......................

_______

AWG

MAXIMUM OVERCURRENT DEVICE

FUSES/HACR BREAKER ............

_______

AMPS

CLEARANCES

ACCESS SIDE 24" [609.6 mm]

AIR INLETS 6" [152 mm]

ABOVE UNIT 60" [1524 mm]

(-)APM- JEZ SERIES – AIR CONDITIONERS
EFFICIENCIES TO 16 SEER/13 EER
NOMINAL SIZES 1.5-5 TONS [5.28-17.6 kW]

JOB NAME UNIT MODEL NO.

CONTRACTOR COIL MODEL NO.

ENGINEER AIR HANDLER MODEL NO.

SUBMITTED FOR APPROVAL RECORD LOCATION

DATE ORDER NO.

FEATURES FOR (-)APM- JEZ SERIES

• The Comfort Control System™provides on-board diagnostics and fault history
for condensing units with single-phase compressors by detecting system and
electrical problems without adding sensors. It can also communicate “fault
codes” to enabled “L terminal” thermostats. The integrated diagnostics with

Active Protection

™

prevents compressor operation when potentially harmful

conditions are detected.

• Features an exclusive 7-Segment LED Display. The information display
quickly and accurately shows technicians the source of malfunctions.

• Compressor sound blanket is standard to provide quiet operation.

• R410-A Refrigerant

• High Efficiency

• Scroll Compressor

• All refrigerant connections are on the exterior of the unit, located close to the
ground for neat appearing installations.

• Powder painted galvanized steel cabinet. The full wrap-around louvered grille
protects the coil from damage.

• Copper tube—aluminum fin coils are used on all models.

• The control box is located in the top corner of the cabinet providing for easy
access through a service panel.

• Service valves are standard on all models.

• Power and control wiring are kept separate.

• Separate compressor compartment for easy service access.

• Drawn, painted base pan for extra corrosion resistance and sound reduction.

• The automatic high and low pressure controls, and hard start components
are standard.

• The filter drier is standard on all models.

• Certified and rated under AHRI Standard 210.

• U.L. and cUL listed.

• Factory limited warranty on all parts as follows:

Conditional Compressor (Registration Required) ..........................Ten (10) Years

Parts................................................................................................Ten (10) Years

(-)APM- JEZ Series Conditional Replacement Warranty:

Manufacturer will provide a replacement model (if an exact replacement is not
available, an equivalent product will be provided) to the original purchaser if the
compressor fails within 5 years. See product warranty card for additional
information.

FIELD INSTALLED ACCESSORIES

Low Ambient Control ........................................................................................

Compressor Crankcase Heater ........................................................................

Featuring the

Comfort Control System

™

• Increased Reliability

• On-Board Diagnostics

• Fault Recall

• Active Protection

™

(IN CERTAIN MATCHED SYSTEMS)

“Proper sizing and installation of equipment is critical to achieve optimal performance. Split system air conditioners and heat pumps must be matched with

appropriate coil components to meet ENERGY STAR criteria. Ask your Contractor for details or visit www.energystar.gov.”

FORM NO. X33-1405

Supersedes Form No. X33-1277