Rheem Prestige Specification
Rheem Prestige™Series Communicating
Two-Stage Variable Speed
Upflow/Horizontal Gas Furnace
FORM NO. G11-546 REV. 1
R802V- Upflow/Horizontal Series
80% A.F.U.E.†
Input Rates 50-125 kBTU
Air
Gas Furnaces
R802V (UF/HZ) Series
✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with
Department of Energy test procedures.
• 80% residential Gas Furnace CSA certified
• Two stages of operation to save energy and maintain optimal
comfort level.
• Variable speed blower motor technology provides ultimate
humidity control quieter sound levels and year round energy
savings
• EcoNet enabled HVAC product
• 3 way multi poise design UF / HZ
• PlusOne
™
Diagnostics — 7 Segment LED all units
• PlusOne
™
Ignition System – DSI for reliability and longevity
• Heat exchanger is removable for improved serviceability.
Aluminized steel construction provides maximum corrosion
resistance and thermal fatigue reliability.
• Solid doors provide quiet operation
• Solid bottom
• Insulated blower compartment
• Low profile 34" cabinet ideal for space constrained
installations
• Blower shelf design – serviceable in all furnace orientations
• Hemmed edges on cabinets and doors
• 1/4 turn door knobs for tool less access
• Integrated Control board features dip switches for easy
system set up
• QR code for quick access to product information from your
smart phone or tablet
• Compatible with single or two stage thermostats. For optimal
performance a two stage thermostat is recommended.
Air
Table of Contents
R802V (UF/HZ) Series
2
TABLE OF CONTENTS
Standard & Optional Equipment ......................................................................3
Model Features/Physical Data & Specifications..................................................4
Model Number Identification ............................................................................5
Dimensional Data ........................................................................................6-7
Blower Performance Data ................................................................................8
Accessories....................................................................................................9
Limited Warranty ..........................................................................................10
Air
Standard & Optional Equipment
R802V (UF/HZ) Series
3
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
DIRECT SPARK IGNITOR
IN-SHOT BURNERS
DRAFT INDUCER MOTOR
PATENTED HEAT EXCHANGER
INTEGRATED FURNACE
CONTROL
STANDARD EQUIPMENT
Completely assembled and wired; 2 speed induced draft blower; high
and low pressure switches; 2 stage redundant main gas control;
blower compartment door safety switch; solid state time on/time off
blower control; limit control; transformer; ECM blower motor. Furnaces
are equipped with cooling/heating relay and transformer (50VA) ready
for air conditioning applications. (Please note: a thermostat is not
included as standard equipment.) Flame sensor diagnostics; fusedprotection (secondary), 3rd speed option for continuous fan.
OPTIONAL EQUIPMENT
Side and bottom filter frame assembly. 4" Flue Adapter
NOTE: Furnace is not listed for use with fuels other than natural or L.P.
(propane) gas.
The complete terms of limited and other warranties are available at our
sales office, or through local installer.
All models can be converted by a qualified Rheem distributor or local
service dealer to use L.P. (propane) gas without changing burners.
Factory approved kits must be used to convert from natural to L.P.
(propane) gas and may be ordered as optional accessories from a
Rheem parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
NOTE: For natural and L.P. (propane) gas models, direct spark ignition
is 100% safety lockout type.
ECM MOTOR
Air
Model Features/Physical Data & Specifications
R802V (UF/HZ) Series
4
MODEL NUMBERS R802V SERIES R802VA050317M*A R802VA075317M*A R802VA075421M*A R802VA100521M*A R802VA125524M*A
High Input-BTU/Hr [kW] ➁
50,000 [15] 75,000 [22] 75,000 [22] 100,000 [29] 125,000 [37]
Heating Capacity BTU/Hr [kW] ➀
40,000 [12] 60,000 [18] 60,000 [18] 80,000 [23] 100,000 [29]
Low Input BTU/Hr [kW] ➁
35,000 [10] 52,500 [15] 52,500 [15] 70,000 [20] 87,500 [25]
Heating Capacity BTU/Hr [kW] ➀
28,000 [8] 42,000 [12] 42,000 [12] 56,000 [16] 70,000 [20]
Heat Ext. Static Pressure [kPa] .10 [.025] .12 [.029] .12 [.029] .15 [.037] .20 [.05]
Blower (D x W) [mm]
11 x 7
[279 x 178]
11 x 7
[279 x 178]
11 x 7
[279 x 178]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
Motor H.P.
Type [W]
1
/2 ECM
[373]
1
/2 ECM
[373]
3
/4 ECM
[560]
3
/4 ECM
[560]
3
/4 ECM
[560]
Motor Full Load Amps 7.7 7.7 9.6 9.6 9.6
Cooling CFM @ Rating Point
[L/s]
1250
[590]
1650
[780]
1800
[850]
1750
[825]
1900
[900]
Max. E.S.P. (In. W.C.) [kPa] 1.0 [.249] 1.0 [.249] 1.0 [.249] 1.0 [.249] 1.0 [.249]
Temperature Rise Range °F
[°C]–High Input
25-55
[13.9-30.6]
25-55
[13.9-30.6]
25-55
[13.9-30.6]
35-65
[19.4-36.1]
35-65
[19.4-36.1]
Temperature Rise Range °F
[°C]–Low Input
20-50
[12.8-29.4]
20-50
[12.8-29.4]
20-50
[12.8-29.4]
30-60
[18.3-35]
30-60
[18.3-35]
Max. Outlet Air Temp. °F
[°C]
155
[68.3]
155
[68.3]
165
[73.8]
180
[82.2]
180
[82.2]
Approx. Shipping Weight (Lbs.)
[kg]
125
[57]
125
[57]
140
[64]
140
[64]
150
[68]
AFUE ➀
80.0% 80.0% 80.0% 80.0% 80.0%
NOTES: All models are 115V, 60HZ, 1 Ph. Gas connection size for all models is 1/2" [12 mm] N.P.T.
➀ In accordance with D.O.E. test procedures.
➁ See Conversion Kit Index Form for high altitude derate.
* S = Standard, X = Low Nox
[ ] Designates Metric Conversions
•
80% residential Gas Furnace CSA certified
•
Two stages of operation to save energy and maintain optimal
comfort level.
•
Variable speed blower motor technology provides ultimate
humidity control quieter sound levels and year round energy
savings
•
EcoNet enabled HVAC product
•
3 way multi poise design UF / HZ
•
PlusOne
™
Diagnostics — 7 Segment LED all units
•
PlusOne
™
Ignition System – DSI for reliability and longevity
•
Heat exchanger is removable for improved serviceability.
Aluminized steel construction provides maximum corrosion
resistance and thermal fatigue reliability.
•
Solid doors provide quiet operation
•
Solid bottom
•
Insulated blower compartment
•
Low profile 34" cabinet ideal for space constrained
installations
•
Blower shelf design serviceable in all furnace orientations
•
Hemmed edges on cabinets and doors
•
1/4 turn door knobs for tool less access
•
Integrated Controls board features dip switches for easy
system set up
•
QR code for quick access to product information from your
smart phone or tablet
•
Compatible with single or two stage thermostats. For optimal
performance a two stage thermostat is recommended.
Model Features
Physical Data and Specifications
Loading...