Page 1
PROJECT NAME ______________________________________________________________________________
LOCATION __________________________________________________________________________________
ARCHITECT__________________________________________________________________________________
ENGINEER __________________________________________________________________________________
CONTRACTOR ______________________________________________________________________________
SUBMITTED BY ______________________________ DATE ________________________________________
UNIT SUMMARY
SUBMITTAL COVER SHEET
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number
ACCESSORIES: NOTES:
PRINTED IN U.S.A. 10-06 DC FORM NO. X11-1123 REV. 2
Supersedes Form No. X11-1123 Rev. 1
Page 2
SUBMITTAL SHEET FOR PACKAGE HEAT PUMP UNITS
FEATURING INDUSTRY STANDARD R-410A REFRIGERANT
RQNM- 13 SEER SERIES
RQPM- 14 SEER SERIES
RQRM- 15/16 SEER SERIES
Nominal Sizes 2 thru 5 Tons [7-17.6 kW]
JOB NAME DATE
CONTRACTOR UNIT DESIGNATION
ENGINEER MODEL NO.
SUBMITTED FOR APPROVAL RECORD LOCATION
SUBMITTED BY ORDER NO.
FORM NO. X33-1238 REV. 5
Supersedes Form No. X33-1238 Rev. 4
UNIT DATA
COOLING PERFORMANCE
TOTAL CAPACITY* ........................
_______
MBH
SENSIBLE CAPACITY* ..................
_______
MBH
OUTDOOR DESIGN TEMP.
_______
°F [°C] DB/WB
TOTAL SUPPLY AIR ................
_______
CFM [L/s]
TEMP. OF AIR ENTERING
EVAPORATOR COIL......
_______
°F [°C] DB/WB
POWER INPUT REQUIREMENT ......
_______
KW
SEER RATING........................................
_______
(*uses blower motor heat)
HEATING PERFORMANCE
GAS HEAT INPUT CAPACITY..........
_______
MBH
HEAT PUMP HEATING PERFORMANCE
CAPACITY @ 47°F .......................... ________MBH
CAPACITY @ 17°F .......................... ________MBH
COEFFICIENT OF PERFORMANCE
@ 47°F............................................ ________C.O.P.
@ 17°F............................................ ________C.O.P.
ELECTRIC HEAT CAPACITY ............
_______
KW
H.S.P.F. ...................................................... _______
SUPPLY AIR BLOWER PERFORMANCE
TOTAL SUPPLY AIR ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
BLOWER SPEED ..........................
_______
RPM
POWER OUTPUT REQUIREMENT ..
_______
BHP
MOTOR RATING ........................
_______
HP [W]
POWER INPUT REQUIREMENT ......
_______
KW
ELECTRICAL DATA
POWER SUPPLY ..........................
__________Hz
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES HACR BREAKER ........
_______
AMPS
TOTAL UNIT WEIGHT
TOTAL OPERATING WEIGHT ....
_______
LBS [kg]
(including field-installed accessories)
CLEARANCES
SIDE “A” 18" [457 mm]
SIDE “B” 0" [304 mm]
SIDE “C” 12" [305 mm]
SIDE “D” 30" [762 mm]
ABOVE UNIT 60" [1524 mm]
FEATURES FOR RQNM/RQPM/RQRM-
• Scroll Compressor
• Copper Tube/Aluminum Fin Coils
• Powder painted louvered steel cabinet protects coil from
damage
• Painted Base Pan
• Demand Defrost Control
• Non-Cycling Reversing Valve
• Gauge Ports
• Control box is fully accessible
• Power and control wiring are kept separate
• Certified and rated under AHRI Standard 240
• U.L. listed
• Factory run tested prior to shipment
• Factory limited warranty on parts as follows:
Compressor
1 Phase, Residential Applications......................Ten (10) Years
13 & 14 SEER, Commercial Applications........Five (5) Years
Conditional Parts, 1 Phase, Residential Applications
(Registration Required) ..................................Ten (10) Years
1 & 3 Phase, Commercial Applications ................One (1) Year
[ ] Designates Metric Conversions
Page 3
DIMENSIONS
[ ] Designates Metric Conversions
FRONT VIEW
REAR VIEW
ELECTRICAL CONNECTIONS
BOTTOM VIEW
Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.
Rheem Sales Company, Inc.
P.O. Box 17010, Fort Smith, AR 72917
“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A. 6-10 DC FORM NO. X33-1238 REV. 5
Supersedes Form No. X33-1238 Rev. 4
Model
024, 030, 036, 037
042, 043, 048, 049, 060
Height “A”
29 1/8"
37 1/8"
Loading...