PROJECT NAME ______________________________________________________________________________
LOCATION __________________________________________________________________________________
ARCHITECT__________________________________________________________________________________
ENGINEER __________________________________________________________________________________
CONTRACTOR ______________________________________________________________________________
SUBMITTED BY ______________________________ DATE ________________________________________
UNIT SUMMARY
SUBMITTAL COVER SHEET
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number
ACCESSORIES: NOTES:
PRINTED IN U.S.A. 10-06 DC FORM NO. X11-1123 REV. 2
Supersedes Form No. X11-1123 Rev. 1
SUBMITTAL SHEET FOR PACKAGE AIR CONDITIONERS
RSNM- 13 SEER SERIES, RSPM- 14 SEER SERIES
FEATURING EARTH-FRIENDLY R-410A REFRIGERANT
NOMINAL SIZES 2 THRU 5 TONS [7 THRU 17.6 kW]
JOB NAME DATE
CONTRACTOR UNIT DESIGNATION
ENGINEER MODEL NO.
SUBMITTED FOR APPROVAL RECORD LOCATION
SUBMITTED BY ORDER NO.
FORM NO. X33-1243 REV. 2
Supersedes Form No. X33-1243 Rev. 1
UNIT DATA
COOLING PERFORMANCE
TOTAL CAPACITY* ........................
_______
MBH
SENSIBLE CAPACITY* ..................
_______
MBH
OUTDOOR DESIGN TEMP.
_______
°F [°C] DB/WB
TOTAL SUPPLY AIR ................
_______
CFM [L/s]
TEMP. OF AIR ENTERING
EVAPORATOR COIL......
_______
°F [°C] DB/WB
POWER INPUT REQUIREMENT ......
_______
KW
SEER RATING........................................
_______
(*uses blower motor heat)
SUPPLY AIR BLOWER PERFORMANCE
TOTAL SUPPLY AIR ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
BLOWER SPEED ..........................
_______
RPM
POWER OUTPUT REQUIREMENT ..
_______
BHP
MOTOR RATING ........................
_______
HP [W]
POWER INPUT REQUIREMENT ......
_______
KW
ELECTRICAL DATA
POWER SUPPLY ........................
____/____/____
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES HACR BREAKER ........
_______
AMPS
TOTAL UNIT WEIGHT
TOTAL OPERATING WEIGHT ....
_______
LBS [kg]
(including field-installed accessories)
CLEARANCES
SIDE “A” 18" [457 mm]
SIDE “B” 0" [304 mm]
SIDE “C” 12" [305 mm]
SIDE “D” 30" [762 mm]
ABOVE UNIT 60" [1524 mm]
FEATURES FOR RSNM-/RSPM-
• Scroll Compressor
• Copper Tube/Aluminum Fin Coils
• Powder painted louvered steel cabinet protects coil from yard
hazard damage
• Painted Base Pan
• Easily accessible Gauge Ports
• Spacious control box for easy accessibility
• Power and control wiring are separated
• Certified and rated under ARI Standard 240
• U.L. listed
• Zero Clearance to structure
• Hi-Static Capability
• Indoor Coil access for easy cleaning
• Slide-Out Indoor Blower for easy motor & blower maintenance
• Slide-Out Drain Pan for easy access and cleaning
• Round Horizontal Supply & Return for application adaptability
• Duct Collars provided
• Condensate Trap provided
• Removable Base Rails
• Factory run-tested prior to shipment
• Electric Heat Factory or Field Installed
• Factory limited warranty on parts as follows:
Compressor:
1 Phase (Residential Applications) ..................Ten (10) Years
• 13 & 14 SEER, Commercial Applications ........Five (5) Years
Any Other Part:
1 & 3 Phase Models (Commercial Applications)..One (1) Year
1 Phase Models (Residential Applications)........Five (5) Years
[ ] Designates Metric Conversions
(14 SEER ONLY)
earth friendly refrigerant
Model
024, 030, 036, 042
048, 060
Height “A”
29 1/8"
37 1/8"
DIMENSIONS
[ ] Designates Metric Conversions
FRONT VIEW
REAR VIEW
ELECTRICAL CONNECTIONS
BOTTOM VIEW
(FRONT)
(REAR)
Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.
Rheem Sales Company, Inc.
P.O. Box 17010, Fort Smith, AR 72917
“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A. 4-08 DC FORM NO. X33-1243 REV. 2
Supersedes Form No. X33-1243 Rev. 1
Loading...