Reznor VC Series Option Installation Manual

WIND & RAIN HOOD CONVERSION INSTRUCTIONS

Applies to: Gas-Fired, Tubular, Radiant,

Low-Intensity Infrared Heater

Model VCS/VCT (Harsh Environment )

Part no. 270689

VCS/T Models

Fit Wind &

Rain Hood

CONVERSION KIT PART NUMBER 270615

Part No. Description Quantity

270435 5mm diameter x 16mm long Stainless Steel screw for 1.2mm material 3
270616 VC outdoor air spigot 1
270617 4" outdoor wind and rain hood assembly Stainless Steel 1
270414 No. 8 x 1/2" Stainless Steel cross pan head self tapper 2
270689 Wind and rain hood conversion manual (outdoor only) VC 1

It is essential that when fitting the wind and rain

hood kit that waterproof sealant is used where

indicated.

Step 1: Remove the screws securing the original fresh
air inlet plate with a no. 2 cross headed screwdriver,

(keep screws for re-use). Carefully prise off the plate,

(stuck on with sealant), making sure not to damage the
burner casing.

Step 2: Apply waterproof sealant apply to the inner

face of the spigot along the line of the circle indicated.

2