Reznor H60 Spec Sheet

TECHNICAL
SPECIFICATIONS

Series

Forced Air Destratification Fans

Reznor® Huracan™ destratification fans are available in 4 sizes to support

commercial and industrial spaces up to 60 feet in height. Huracan fans

move warm air from the upper reaches of the space back to the floor

using minimal energy improving overall building energy efficiency and

occupant comfort. During heating season, this action minimizes the

amount and cost of heat needed to satisfy occupant comfort or product

safety by eliminating the natural stratification that occurs and directing

heat already provided to the space back to lower levels. Dripping water

and puddles on the floor caused by sweating at the roof can also be

eliminated when that warm, humid air is mixed with the cooler, dry air

near the floor. Huracan fans can reduce cooling load as well by providing

a consistent yet gentle air flow during the heat of summer or warmer

days during spring and fall. Integrated louvers and directional brackets

enable directed airflow in unusual geometry spaces or around features

that block airflow such as warehouse shelving.

Reznor Huracan destratification fans offer a sleek design sure to

compliment any space. Huracan fans features a two-tone black and white

coated, scratch-resistant paint scheme. Each unit has clean, rounded

corners and edges with no visible screws or fasteners which enhances

installer safety while providing superior appearance. The Huracan series

physically match appearance and complement the full portfolio of Reznor

heating products. They can be controlled independently or together with

the gas, hydronic or electric unit heaters for optimized space temperature

control. Every Huracan fan provides the same superior performance and

reliability that Reznor customers have relied on for more than 100 years.

FEATURES and BENEFITS

• Reduces heat load and building energy efficiency by
distributing existing space heat to all levels including the
floor that is occupied

• Provide cooling air movement improving occupant comfort

• Suitable for use in spaces with 10 to 60 feet of height to
effectively drive air to the floor

• Available in 4 sizes to optimize space performance and
economics

• Available in 5 common lighting voltages from 115V to
277V for ease in installation and reduced wiring costs

• Models available that work interchangeably with 208/1,
230/1 and 240/1 voltages to simplify selection and
stocking

• Easy hanging using provided brackets for field-provided
threaded downrods

• Hard-mounting for improved safety compared to wire rope
hung models

• Integrated louvers to direct air to improve destratification
and occupant comfort

• Directional hanging brackets add multi-dimensional air
direction control to optimize space air movement

• External 24V control wiring terminal strip for quick
connection to thermostat

• Integrated control opportunities with Reznor unit heaters
to optimize building efficiency

• Reznor Branding provided but may be eliminated for a
clean appearance

OPTIONAL FEATURES

• Remote occupied/unoccupied (on/off) switch available for
manual operation

• Multi-unit controls for zoning up to 5 units

• Internal temperature control so unit runs only when
needed saving operating expense

• Single stage for simple temperature driven control

• Dual stage thermostat for use when coordinating unit
heater and destratification operation to reduce operating
expense

• BACnet linkable thermostat for Building Management
System (BMS) integration

• Thermostat protection and mounting accessories

MODEL IDENTIFICATION CODE

H 60

H = Huracan

TM

Series

60 = Maximum Recommended
Ceiling Height

TECHNICAL DATA

Parameter

25 35 50 60

Maximum ceiling height recommendation (feet) 25 35 50 60

Minimum ceiling height recommendation (feet) 10 18 25 30

Air volume (cfm) 650 1100 1500 2000

Air volume (meters3/min) 18.4 31.2 42.5 56.7

Recommended nominal floor area/fan (feet2) 1000 1500 1500 2000

Recommended air volume/fan (feet2) 25,000 52,500 75,000 120,000

Discharge air opening area (feet2) 0.967 1.247 2.382 2.382

Discharge air opening area (meters2) 0.090 0.116 0.221 0.221

Output velocity (fpm) 672 882 630 840

Output velocity (meters/minute) 205 269 192 256

Huracan Unit Size

Fan diameter (inches) 10 12 16 16

Fan motor size (horsepower) 0.03 0.06 1/15 1/6

Estimated Sound level (dba @ max. recommended height) 36 36 49 41

Full load amps

Voltage/Phase/HZ

115/1/60 0.5 1.0 0.9 1.3

208/1/60 0.2 0.4 0.4 0.8

230/1/60 0.2 0.4 0.4 0.9

240/1/60 0.3 0.4 0.4 1.0

277/1/60 0.2 0.3 0.3 0.8

Maximum overcurrent protection (amps) 15

2

DIMENSIONS

0H

Model

H25 14 (356)

H35 17 (432)

H50, H60 25 (635)

Height Width Depth

Inches (mm)

27 (686) 12 (305)

WEIGHTS

Model

H25 H35 H5

Pounds (kg)

22 (10) 28 (13) 38 (18) 43 (20)

60

FAN SELECTION HEATING and COOLING NEEDS

1. Choose the appropriate model based on the maximum ceiling height of the space to be destratified.

a. See the Technical Specification Table for recommended maximum and minimum ceiling height. Each model
has a recommended ceiling height range (minimum and maximum provided).

Example: 30 ft maximum ceiling height in the space. This falls within the range of 18-35 ft which corresponds to
the H35 model.

2. Determine the floor area in square feet.

a. Typically, the area is calculated by multiplying the length by the width.

b. Unique space layout may require breaking the space into logical smaller geometric shapes and calculating
area for each.

Example: Space length is 70 feet and width 50 feet. 70 feet * 50 feet = 3,500 square feet.

3. Calculate the number of fans needed to properly destratify the space during heating season (1 complete air-turn
per hour minimum)

a. Calculate the number of fans by dividing the floor area by the recommended nominal flow area for the model
determined in step 1.

i. See the Technical Specification Table for the model-specific recommended nominal flow area.

Example: Per the Technical Specification Table the nominal flow area for the H35 model is 1,500 square feet.
3,500 square feet/1,500 square feet per Huracan fan = 2.33 fans. This indicates 3 fans is needed to ensure proper
destratification.

b. Calculate the number of fans based on space volume.

i. Calculate the space volume by multiplying the maximum ceiling height by the floor area.

Example: 30 feet ceiling x 3,500 square feet floor space = 105,000 cubic feet.

ii. Calculate the number of fans required by dividing the space volume (cubic feet) by the recommended air
volume/fan

Example: 105,000 cubic feet/ 52,500 cubic feet/fan = 2.0 fans

c. Select the lowest number of fans calculated above unless additional air movement is desired.

4. If cooling air movement is the primary need, then best results are obtained if the number of fans is increased up to
double of the calculations for heating. In the example, this means raising the fan number to 3 or 4 fans depending
on total airflow desired.

3

For complete catalog information including submittals,
energy calculations, dimension drawings, and more go to
www.ReznorHVAC.com or call 800-695-1901.

product improvement, we reserve the right to alter,

at any time, the design, construction, dimensions,

weights, etc., of equipment information shown here.

© 2023 Nortek Global HVAC, LLC.
Reznor is a registered trademark of Nortek Global HVAC, LLC. All other trademarks are the property of their respective owners.
All Rights Reserved. Printed in U.S.A.

918F-0123

Note: In keeping with our policy of continuous