Revox RECONNECT M219 MKI User Manual

of

of

The Philosophy of Excellence

TThhee M

AAddddiittiioonnaall rroooom

M SSeerriieess

M221199

M

mpplliiffiieerr

aam

m

of Switzerland :

M219 Additional room amplifier

M Series

Contents

M219 Additional room amplifier
Safety
Installation and operation
Safety measures
Warranty

Front view
Connection plan
Detailed description

[1] Local IN 1 2 3
[2] PRE OUT
[3] DIL Setup switches

(1) IR receiver
(2) Pre Out

(3) Input IN
(4-5) Local inputs
(6-7-8) Addressing

[4] M219 Link
[5] IR Link
[6] Input IN
[7] Channel Select
[8] IN Revox MR Bus
[9] OUT Revox MR Bus
[10] R-L Speakers
[11] Fuse
[12] AC Power

M219 cabling plan diagram
Multiroom Cabling
Personal M219 settings
Technical data
Guarantee
Delivered items

2
3
3
4
4

5
6
7
7
7
8
8
9

10-11

12
12
13
13
14

14-15

15
15
16
16
16

17
18
18
19
20
20

1

M219 Additional room amplifier

M219

Additional room
amplifier

General

The M219 is a digital Additional
Room Amplifier from the newest
M Series in the
programme. It is used for the
reproduction of music in the
additional rooms in a Multiroom
system and can also supply the
listener with current information
through an additional display.
The M219 receives the signals
from a selected source (CD,
Tuner, Server ...) in the main
room through a multiroom bus
cable. Volume, balance, bass
and treble settings can be made
in individually in each room.
Also, up to 3 local sources can
be connected and listened to in
each additional room. If you
want “concealed” operation,
various wall-mounted
controllers or IR receivers can
be connected.

Installation

The M219 should be installed in
such a way that the ventilation
slots are not covered up and so
that there is a gap of at least 5
cm ( ≈ 2 in) between the unit
and any walls or furniture.

REVOX Multiroom

M Series

You should avoid installing it in
locations where:

- there is direct sunlight

- it is next to a heat source

- there is poor ventilation

- there is a lot of dust in the

atmosphere

- it is unstable

- there is a risk of splashing

- there is high humidity

Furthermore you may not place
objects filled with liquids, such
as vases, or naked flame
sources, such as lighted
candles, on the M219.

Stacking several M219s

If you want to stack several
M219s on top of each other, we
recommend that you use the
corresponding installation kit,
with the Part no. 1.551.313.00.

Room-AmplifierM219

Room-AmplifierM219

M219

Room-Amplifier

2

M219 Additional room amplifier

Safety

Please take note of the
information shown on the labels
on the rear of the unit. Housings
should not be removed, in order
to avoid the danger of an
electric shock. Maintenance and
repairs should only be carried
out by qualified personnel.

This symbol warns of
“dangerous voltages” within the
unit. In the case of contact with
the corresponding components,
the level of voltage can cause
an electric shock.

!

This symbol indicates important
advice for operation and
maintenance in this
documentation.

M Series

Installation and operation

Please check the unit and
accessories for any signs of
transit damage, once you have
unpacked it. Please read the
operating instructions carefully
before starting to use the unit.
Keep the documentation
somewhere safe for future
reference.

If the unit shows any signs of
damage or has come into
contact with any fluids should
not be connected to a power
supply.

Only use the power cable
supplied. Before connecting the
power, the power supply and
unit connection values (power
voltage, frequency) must be
checked. The fuse used in the
unit must conform to the factory
definitions contained in the
“Technical data” section of this
manual.

3

M219 Additional room amplifier

Safety measures

Operational anomalies

In the case of any unusual
noises or smells coming from
the unit, remove the power
cable immediately. Have the
unit checked as soon as
possible by your supplier.

Do not open the unit

The unit should not be opened
because of the risk of
electrocution.

Periods of non-use

If the unit is not going to be
used for a longer period of time,
the power cable should be
unplugged from the socket as a
safety precaution.

Foreign objects

Fluids, flammables or other
foreign objects should not find
their way into any of the unit’s
openings as this can result in
breakdowns, fire or an electric
shock.

Power cable

Always pull the plug out of the
socket while holding the plug
housing and not the cable.

M Series

Warranty

Device regulations

REVOX offers a warranty in

EU/EEA countries on products
bought within the EU, in
addition to the statutory
warranty provided by the
retailer. The warranty covers
material and labour during the
period of the warranty, which is
stipulated in the individual EU
countries by the
Partners.

In all countries, the terms of
warranty from the
reseller is offered in addition to
the statutory regulations. You
must be able to prove that the
product was bought from an
approved
making any warranty claim.

The warranty is invalidated if
any inappropriate or
unprofessional repairs have
been carried out on the unit.

REVOX Sales

REVOX

REVOX Partner when

4

M219 Additional room amplifier

M Series

M219- Front view

[A] [B] [C]

[A] IR Sensor

The InfraRed sensor receives
signals from the remote control
or from any other IR control
devices, such as the PDAs for
the music server.

Switching the IR sensor off

If required, the IR sensor can be
switched off using the SETUP
DIL switch [3] on the rear of the

M219.

[B] Status LED

The blue status LED gives information about the current state of the

M219.

LED display M219 Status

Permanently dark M219 standby mode
Permanently lit M219 active
Rapid flashing Breakdown, overload
Rapid flashing Min/max position reached

(Volume, Bass, Treble, Balance)
Slow flashing IR receive (RC5 or RC6 Codes)
Single flash LOCAL 1 or general change of source
Double flash LOCAL 2
Triple flash LOCAL 3

M219

Room-Amplifier

[C] Ventilation slots

The ventilation slots on the front
and the top of the M219 must
always be left clear of
obstructions.

The M219 should be installed in
such a way that the ventilation
slots are not covered up and so
that there is a gap of at least
5cm between the unit and any
walls or furniture.

5

M219 Additional room amplifier

Connection plan

[1] [2] [3] [4] [5] [6]

LOCAL IN

12

L

R

3

Short descriptions

[1] Local Cinch inputs L/R

[2] Preamp outputs L/R

[3] DIL setup switches

[4] M219-Link display connector

[5] IR receiver or wall-mounted

remote control connections

[6] Switching voltage input

Rear view

PRE
OUT

1432 5678

1432

CHANNEL

SELECT

[7] [8] [9] [10] [11] [12]

SETUP

M219
LINK

OUT

IN

MR-BUS SPEAKERS

[7]

[8] Multiroom Bus input

[9] Multiroom Bus output

[10] Speaker connections L/R

[11] Fuse

[12] Power connection

OUT

--

IN

+

+

+ R - - L +

Stereo/ Mono switch

M Series

FUSE AC - POWER

6